Product Data Sheet SlimLine Plus Unmanaged PoE Industrial Connectivity EB-5ES Industrial Ethernet Switch Sixnet's EB-5ES-PSE is a 5 port industrial Ethernet switch that combines the rugged reliability of a real-time switch with four industrial Power over Ethernet (PoE) sourcing ports. Providing plug-and-play simplicity, these switches automatically sense and support all IEEE 802.3af compliant devices. In addition, advanced technology allows the switches to connect with non-PoE devices without causing damage. This performance saves time and money while keeping networks up and running even in the toughest conditions. Overview Industrial Switch Product Highlights Slim 5 port DIN-rail packaging 4 PoE sourcing ports with full IEEE compliance Pre-configured for plug-and-play simplicity Industrial-hardened design To learn more about our EB-5ES-PSE Industrial Ethernet Switch with PoE, simply contact [email protected] or call +1 (518) 877-5173. Features IEEE 802.3af Compliant PoE Ports Power Sourcing Equipment (PSE) operation Auto-detection of PD (powered devices) Over-temperature and over-current detection Over and under-voltage detection Real-Time Network Operation Intelligent message routing (no collisions) Supports all standard IEEE 802.3 protocols True Plug & Play Simplicity Auto-sensing for speed and duplex Auto-mdi / mdix-crossover and auto-polarity Automatic PoE power management Trouble-Free Operation Truly industrial -40 to 75°C operation Dual power inputs with surge protection DIN-rail or direct panel mounting To learn more about our EB-5ES-PSE Industrial Ethernet Switch with PoE, simply contact [email protected] or call +1 (518) 877-5173. Specs Ethernet Performance Operation: unmanaged, store and forward, wire-speed switching, non-blocking Modes: full or half duplex operation with flow control supported on all ports Support: all IEEE 802.3 compliant devices and protocols are supported Ethernet compliance IEEE 802.3af (Power over Ethernet) IEEE 802.3 (10Mbps Ethernet for legacy devices) IEEE 802.3u (100Mbps Ethernet for newer devices) IEEE 802.3x (Full-Duplex with Flow Control) MAC addresses: 1024 Memory bandwidth: 3.2 Gbps Latency (typical): 5 us for 100 Mbps and 16 us for 10 Mbps (plus frame time) Ethernet isolation: 1500 Vrms 1 minute RJ45 Copper Ports RJ45 ports: Up to five RJ45 ports that are fully IEEE 802.3 compliant; four of these are PoE (PSE) and fully 802.3af compliant RJ45 speed and duplex: 10/100 auto-detecting for speed and duplex (full or half) RJ45 MDI / MDIX: Auto-mdi / mdix-crossover automatically supports either straight or crossed cables RJ45 Polarity: Auto-polarity for automatic correction of crossed TXD and RXD pairs Fiber Optic Ports One optional 100 Mbps fiber optic port for distances up to 120km Transceivers: SC or ST style Multimode: Links up to 4 km typical; 1310 nm; use with 50 or 62.5/125 um fiber Transmitter power (dB): -21 min, -17 typ, -14 max Receiver sensitivity (dB): -34 typ, -31 max Singlemode: Links up to 20 km typical; 1310 nm; use with 9 or 10/125 um fiber Transmitter power (dB): -15 min, -11 typ, -8 max Receiver sensitivity (dB): -36 typ, -31 max Singlemode Long Haul: Links up to 40 km typical; 1310 nm; use with 9 or 10/125 um fiber Transmitter power (dB): -5 min, -3 typ, -0 max (special order) Receiver sensitivity (dB): -36 typ, -34 max (special order) Longer distances: Contact Sixnet for distances up to 120 km Eye safety: IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11 Power Input Redundancy: Dual power input terminals with reverse polarity protection Power input: 10-30 VDC with no PoE output; 45-56 VDC for PoE output Switch Power Consumption 2.0 W (5-port without fiber) + PoE 3.0 W (5-port with 1 fiber) + PoE Typical for all ports to be active at 100 Mbps PoE Power consumption: Up to 15.4 W per port Transient protection: 15,000 watts peak Spike protection: 5,000 watts (10 times for 10 uS) Spike protection: 5,000 watts (10 times for 10 uS) PoE Output PoE compliance: 100% IEEE 802.3af compliant PoE classification: PSE (Power Sourcing Equipment) PoE voltage: 45 to 48 VDC depending on power input PoE power: Up to 15.4 watts per channel PoE RJ45: pin assignments TX/V- (3, 6); RX/V+ (1, 2) PoE operation: automatic detection and power management PoE disconnect mode: DC disconnect PoE protection: over-temperature, over-current, over/under-voltage and transient Environmental Operating temperature: -40 to 75°C (cold startup @ -40) Storage temperature: -40 to 85°C Humidity: 5 to 95% RH (non-condensing) Vibration: IEC68-2-6 Shock: IEC68-2-27 Freefall: IEC68-2-32 Standards & Compliance Electrical safety: UL508 / CSA C22.2/14 per CUL; EN61010-1 EMC: FCC part 15 / ICES-003; EN55022 / IEC61326-1 Hazardous locations: UL1604, CSA C22.2/213 per CUL (Class I, Div. 2, Groups A, B, C, D); ATEX / Cenelec (Zone 2) MTBF Mean Time Between Failure: >1,000,000 hours RoHS and WEEE: RoHS (Pb free) and WEEE compliant ISO9001:2000: Certified "Total Quality" company Industrial Warranty: 5 years with product registration Mechanical Slim line case, ideal for DIN-rail mounting Material: Corrosion-proof polycarbonate plastic Protection: IP30 protection from dust and debris DIN-rail or direct-panel mounting (no optional kits or accessories required) Dimensions: 1.0" x 4" x 3.3" (2.5 x 10.0 x 8.3 cm) Weight: 4 oz. (0.11 kg) All specifications are subject to change. Contact Sixnet to learn more. To learn more about our EB-5ES-PSE Industrial Ethernet Switch with PoE, simply contact [email protected] or call +1 (518) 877-5173. Order Guide Part Number Description EB-5ES-PSE-1 Industrial switch with 4 PoE and 1 RJ45 uplink EB-5ES-PSE-2SC Industrial switch with 1 multimode SC for links up to 4 km (special order) EB-5ES-PSE-2ST Industrial switch with 1 multimode ST for links up to 4 km (special order) EB-5ES-PSE-3SC Industrial switch with 1 singlemode SC for links up to 20 km (special order) EB-5ES-PSE-3ST Industrial switch with 1 singlemode ST for links up to 20 km (special order) EB-5ES-PSE-3SCL Industrial switch with 1 singlemode long haul SC for link up to 40 km (special order) EB-5ES-PSE-3STL Industrial switch with 1 singlemode long haul ST for links up to 40 km (special order) Models EB-5ES-PSE-1 5 RJ45 Ports EB-5ES-PSE-2SC or -3SC 4 RJ45 & 1 Fiber (SC Style) EB-5ES-PSE-2ST or -3ST 4 RJ45 & 1 Fiber (ST Style)