PRODUCT DATASHEET xx-PS-024 Industrial 24 VDC Power Supplies These Sixnet industrial power supplies are designed to meet or exceed the requirements of the industrial devices they power. They are ideal for any industrial application where consistent performance and long term reliability are a must. RM-PS-024-01 PRODUCT HIGHLIGHTS n AC input up to 264 VAC at 50/60 Hz n DC input up to 370 VDC n 24 VDC output up to 120 Watts (5 Amps) n Fully protected from short circuit, over-load, over-voltage and over-temperature conditions n DIN rail mounting standard n n Wide operating temperature range Certified to perform SEVERAL MODELS TO CHOOSE FROM ET-PS-024-02 RM-PS-024-01 (24 Watts) p Output: 24 VDC @ 1 Amp p 18 extra terminals for bussing power p Connect a second supply for redundancy p Universal AC input from 85 – 264 VAC p Ideal for small distributed I/O stations p Unique hot swappable power module p Both DIN rail and panel mounting n n ET-PS-024-02 (48 Watts) p Output: 24 VDC @ 2 Amps p Compact size - ideal for small enclosures p Universal AC input from 85 - 264 VAC p Ideal to power an industrial switch or modem nST-PS-024-05 (120 Watts) p Output: 24 VDC @ 5 Amps p Selectable AC input up to 264 VAC p Compact size - high power to size ratio p Ideal for medium size automation panels ST-PS-024-05 ORDERING GUIDE RM-PS-024-01F AC to 24 VDC power supply; 24 Watts (1 Amp) ET-PS-024-02 AC to 24 VDC power supply; 48 Watts (2 Amps) ST-PS-024-05 AC to 24 VDC power supply; 120 Watts (5 Amps) Rev: Apr 27, 2010 industrial & commercial solutions www.sixnet.com xx-PS-024 Industrial 24 VDC Power Supplies specifications RM-PS-024-01 MODEL ET-PS-024-02 DC Voltage 24VDC Rated Current 1 Amp 2 Amps 5 Amps Current Range 0 - 1 Amps 0 - 2 Amps 0 - 5 Amps 24 Watts 48 Watts 120 Watts OUTPUT Rated Power Ripple/Noise (max) 240 mV p-p 480 mV p-p 80 mVp-p - 21.6 - 26.4 VDC 24 - 28 VDC +/- 1% +/- 1% +/- 1% Line Regulation +/- 0.2% +/- 1% +/- 0.5% Load Regulation +/- 0.5% +/- 1% +/- 1% Setup & Rise Time 200mS & 30mS 800mS & 60mS 500mS & 70mS Hold Time (typical) 100mS @ 230 VAC 100mS @ 230 VAC 36mS @ 230 VAC Voltage Adjust Voltage Tolerance AC Voltage Range 85 - 264 VAC 88 - 132, 176-264 VAC DC Voltage Range 120 - 370 VDC 248 - 370 VDC INPUT Frequency Range 47 - 63 Hz Efficiency (typical) AC Current (typical) 79% 80% 84% 0.6 Amp @ 115 VAC, 0.4 Amp @ 230 VAC 1.5 Amps @115 VAC, 0.75 Amp @ 230 VAC 2.6 Amps @115 VAC, 1.6Amps @ 230VAC Cold start 36 Amps Cold start 28 Amps @ 115 VAC, 56 Amps @ 230 VAC Cold start 20 Amps @ 115 VAC, 40 Amps @ 230 VAC <0.5 mA @ 240 VAC <1mA @ 240VAC <3.5mA @ 240VAC Inrush Current ENVIRONMENTAL PROTECTION Leakage Current Over-load Above 105% rated output, w/automatic recovery Over-voltage Over-temp. Operation Temp. 135 C, shut down ouput w/automatic recovery 90oC shut down w/automatic recovery -20 to 70oC (derate output 2% per oC above 45oC) -35 to +75oC (derate output 2% per oC above 45oC) -40 to +85oC Operation humidity 20 to 90% RH non-condensing Storage humidity 10 to 95% RH Temp. coefficient +/-0.03% per oC 10 - 500 Hz; 2G 10 min per cycle; 60m period each along X, Y, Z axes Safety STANDARDS 105 - 150% rated output, current limiting w/automatic recovery 28 - 33 VDC shut down output, cycle power to recover o Storage Temp. Vibration CUL (UL508 / CSA C22.2); TUV EN60950-1 Haz. Locations CUL 1604 (CSA C22.2/213); Class I, Div.2; Groups A, B, C, D Withstand Volt. Input to output: 3KVAC; Input to GND: 1.5KVAC; Output to GND: 0.5KVAC Isolation Resistance 100M Ohms @ 500VDC EMI Emissions EMC Immunitiy EN55011, EN55022 (CISPR22) Class B EN61000-4-2, 3, 4, 5; light industry level, critea A Harmonic Current MISCELLANEOUS ST-PS-024-05 EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV5024; EN50024; EN61000-62 (50082-2); heavy industry level, critera A EN61000-3-2, EN61000-3-3 576,000 hours per MILHDBK-217 @ 25oC 365,000 hrs per MILHDBK-217 @25oC Packaging IP30 IP30 Mounting DIN rail or flat to panel MTBF Weight 0.5Kg (1.1lbs) Dims 137,000 hrs per MILHDBK-217 @25oC IP20 DIN rail 0.31 Kg (0.6lbs) 0.79Kg (1.7lbs) See mechanical drawings All specifications are subject to change. Consult factory for latest info. industrial & commercial solutions www.sixnet.com Industrial 24 VDC Power Supplies Mechanical drawings xx-PS-024 RM-PS-024-01 POWER CONNECTIONS OUTPUT DERATING Sixnet Technology Park 331 Ushers Road • Ballston Lake, NY 12019 • USA 1.518.877.5173 • Fax 1.518.877.8346 • [email protected] industrial & commercial solutions Datasheet xx-PS-024 Rev April 15, 2009 www.sixnet.com