Datasheet

PRODUCT DATASHEET
xx-PS-024
INDUSTRIAL 24 VDC POWER SUPPLIES
These Sixnet industrial power supplies are designed to meet or
exceed the requirements of the industrial devices they power.
They are ideal for any industrial application where consistent
performance and long term reliability are a must.
RM-PS-024-01
PRODUCT HIGHLIGHTS
 AC input up to 264 VAC at 50/60 Hz
 DC input up to 370 VDC
 24 VDC output up to 120 Watts (5 Amps)
 Fully protected from short circuit, over-load, over-voltage
and over-temperature conditions
 DIN rail mounting standard


Wide operating temperature range
Certified to perform
SEVERAL MODELS TO CHOOSE FROM

RM-PS-024-01 (24 Watts)
 Output: 24 VDC @ 1 Amp
 18 extra terminals for bussing power
 Connect a second supply for redundancy
 Universal AC input from 85 – 264 VAC
 Ideal for small distributed I/O stations
 Unique hot swappable power module
 Both DIN rail and panel mounting

ET-PS-024-02 (48 Watts)
 Output: 24 VDC @ 2 Amps
 Compact size - ideal for small enclosures

Universal AC input from 85 - 264 VAC
 Ideal to power an industrial switch or modem

ST-PS-024-05 (120 Watts)
 Output: 24 VDC @ 5 Amps
 Selectable AC input up to 264 VAC
 Compact size - high power to size ratio
 Ideal for medium size automation panels
ET-PS-024-02
ST-PS-024-05
ORDERING GUIDE
RM-PS-024-01F
AC to 24 VDC power supply; 24
Watts (1 Amp)
ET-PS-024-02
AC to 24 VDC power supply; 48
Watts (2 Amps)
ST-PS-024-05
AC to 24 VDC power supply; 120
Watts (5 Amps)
SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES
WWW.SIXNET.COM
INDUSTRIAL 24 VDC POWER SUPPLIES SPECIFICATIONS
MODEL
RM-PS-024-01
ET-PS-024-02
DC Voltage
Rated Current
1 Amp
2 Amps
5 Amps
Current Range
0 - 1 Amps
0 - 2 Amps
0 - 5 Amps
24 Watts
48 Watts
120 Watts
OUTPUT
Ripple/Noise (max)
240 mV p-p
480 mV p-p
80 mVp-p
-
21.6 - 26.4 VDC
24 - 28 VDC
+/- 1%
+/- 1%
+/- 1%
Line Regulation
+/- 0.2%
+/- 1%
+/- 0.5%
Load Regulation
+/- 0.5%
+/- 1%
+/- 1%
Setup & Rise Time
200mS & 30mS
800mS & 60mS
500mS & 70mS
Hold Time (typical)
100mS @ 230 VAC
100mS @ 230 VAC
36mS @ 230 VAC
Voltage Adjust
Voltage Tolerance
AC Voltage Range
85 - 264 VAC
88 - 132, 176-264 VAC
DC Voltage Range
120 - 370 VDC
248 - 370 VDC
INPUT
Frequency Range
47 - 63 Hz
Efficiency (typical)
AC Current (typical)
79%
80%
84%
0.6 Amp @ 115 VAC,
0.4 Amp @ 230 VAC
1.5 Amps @115 VAC,
0.75 Amp @ 230 VAC
2.6 Amps @115 VAC,
1.6Amps @ 230VAC
Cold start
36 Amps
Cold start
28 Amps @ 115 VAC,
56 Amps @ 230 VAC
Cold start
20 Amps @ 115 VAC,
40 Amps @ 230 VAC
<0.5 mA @ 240 VAC
<1mA @ 240VAC
<3.5mA @ 240VAC
Inrush Current
ENVIRONMENTAL
PROTECTION
Leakage Current
Over-load
Above 105% rated output,
w/automatic recovery
Over-voltage
Over-temp.
Operation Temp.
105 - 150% rated output,
current limiting w/automatic recovery
28 - 33 VDC shut down output, cycle power to recover
135 C, shut down ouput
w/automatic recovery
o
90oC shut down w/automatic recovery
-20 to 70oC (derate output
2% per oC above 45oC)
-35 to +75oC (derate output 2% per oC above 45oC)
-40 to +85oC
Storage Temp.
Operation humidity
20 to 90% RH non-condensing
Storage humidity
10 to 95% RH
Temp. coefficient
+/-0.03% per oC
Vibration
10 - 500 Hz; 2G 10 min per cycle; 60m period each along X, Y, Z axes
Safety
STANDARDS
ST-PS-024-05
24VDC
Rated Power
CUL (UL508 / CSA C22.2); TUV EN60950-1
Haz. Locations
CUL 1604 (CSA C22.2/213); Class I, Div.2 (Zone 2); Groups A, B, C, D
Withstand Volt.
Input to output: 3KVAC; Input to GND: 1.5KVAC; Output to GND: 0.5KVAC
Isolation Resistance
100M Ohms @ 500VDC
EMI Emissions
EMC Immunitiy
EN55011, EN55022 (CISPR22) Class B
EN61000-4-2, 3, 4, 5; light
industry level, critea A
Harmonic Current
MISCELLANEOUS
xx-PS-024
EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV5024; EN50024; EN61000-62
(50082-2); heavy industry level, critera A
EN61000-3-2, EN61000-3-3
576,000 hours per MILHDBK-217 @ 25oC
365,000 hrs per MILHDBK-217 @25oC
Packaging
IP30
IP30
Mounting
DIN rail or flat to panel
MTBF
Weight
0.5Kg (1.1lbs)
Dims
137,000 hrs per MILHDBK-217 @25oC
IP20
DIN rail
0.31 Kg (0.6lbs)
0.79Kg (1.7lbs)
See mechanical drawings
All specifications are subject to change. Consult factory for latest info.
SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES
WWW.SIXNET.COM
INDUSTRIAL 24 VDC POWER SUPPLIES MECHANICAL DRAWINGS
xx-PS-024
RM-PS-024-01
POWER CONNECTIONS
OUTPUT DERATING
Sixnet Technology Park
331 Ushers Road • Ballston Lake, NY 12019 • USA
1.518.877.5173 • Fax 1.518.877.8346 • [email protected]
SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES
Datasheet xx-PS-024
Rev April 15, 2009
WWW.SIXNET.COM