Pomona ® Model 4773 Insulated Pin Jack, Miniature With Wrapped Wire Terminal FEATURES: • Accepts .080 dia. pin • Max. panel thickness .25. MATERIALS: Pin Jack Insulation: Polycarbonate molded to Pin Jack Body. Panel Insulator: Polycarbonate. Color matches color of Pin Jack insulation. Lockwasher #8 Internal Tooth: Steel. Finish: Nickel plated per QQN-290, latest revision, Class 2, 200/300 miscoinches Hex Nut #8-32: Brass. Finish: Nickel plated per QQN-290, latest revision, Class 2, 200/300 microinches. Pin Jack Body: Nickel Plated Brass latest revision, Alloy 360, ½ Hard. Spring: Gold Plated Beryllium Copper, Berylco 25 per QQC-533, latest revision, Cond. HT. Finish: Body – Electroless nickel plated per MIL-C26074, latest revision, Class 2, 200/300 microinches. Spring – Gold plated per MIL-G-45204, latest revision Type II, Class 00 over electroless nickel per MIL-C-26074, latest revision, Class 1, 200/300 microinches. Wrapped Wire Terminal: Gold Plated Phosphor Bronze Finish: Gold plated per MIL-G-45204, latest revision, Type II, Class 00 over electroless nickel per MIL-C26074, latest revision, Class 1, 200/300 microinches. RATINGS: Operating Temperature: +115°C. (+239°F.) Max. Operating Voltage: 1500 VDC Current: 3 Amperes ORDERING INFORMATION: Model 4773-* * = Color, Standard Colors: -0 Black, -2 Red, -4 Yellow, -5 Green, -6 Blue, -9 White All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 S:\Engineering \Release\DataSheets\FlukeDataSheet\d4773_1_01.doc PomonaACCESS 90276 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1