Model 72918 4mm Banana Plug with Threaded M3 Stud Fast Installation, Rugged Performance Features Threaded M3 stud for rapid mounting. Furnished with two hex nuts. Ideal for lug or ring type connections. Mates to standard 4mm banana jacks. Materials Body: Nickel-plated brass Finish: Tarnish resistant nickel Ratings Voltage: Current: For CE compliance and for personal safety, do not hold in hand when voltages exceed 30 Vrms / 42.4 Vpk / 60 Vdc, or current exceeds 8A maximum.. Maximum voltage for hands free use in controlled testing environments: 5000 Vdc Do not use on circuits where transient stresses can exceed the rated voltage. 36 A Ordering Information Model: 72918 USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2012 D1118934 Rev. 002 Page 1 of 1