High Voltage Power Supply-250W Series HVP050P5000 HVP050N5000 HVP125P2000 HVP125N2000 ELECTRICAL RATINGS VMAX IMAX kV mA HVP050P5000 50 5.0 HVP050N5000 -50 5.0 HVP125P2000 125 2.0 HVP125N2000 -125 2.0 Part Number Features: • Voltage programming • Current programming • Safety interlock • Short circuit protection • NEMA 12 enclosure • Low ripple • HDC input and interface SPECIFICATIONS Electrical: HVP Series Input Voltage: 115 or 230V AC, 50/60 Hz Voltage Regulation: Less than .5% of Output Voltage Current Regulation: Less than .5% of Output Current HVP Series The HVP series power supplies provide up to 250 watts of power in four output versions. Output voltage and current are adjustable up to 100% of maximum ratings. Built-in EMI filtering, safety interlocks, overvoltage/over-current arc protection, short circuit protection, and constant voltage/current operation, are just a few of the standard features in this series. at 20% to 100% of Rated Voltage Ripple: Less than 1% of Output Voltage Temperature Coefficient: 200 ppm/°C Ambient Temperature: • Storage Temperature -20°C to +70°C • Operating Temperature 0°C to +50°C Optional HV Cable: Dielectric Sciences 2121 (Consult factory) Dimensions: In. (mm) All temperatures are ambient unless otherwise noted. Voltage Multipliers Inc. 8711 W. Roosevelt Ave. Visalia, CA 93291 USA 56 Data subject to change without notice. Tel: 559.651.1402 Fax: 559.651.0740 www.voltagemultipliers.com www.highvoltagepowersupplies.com HVP050P5000 HVP050N5000 HVP125P2000 HVP125N2000 Note: Dimensions are typical only. POWER INPUT PIN # FUNCTION 1 Ground 2 Neutral 3 Line 4 Fault Out 5 Fault Return 6 N/C PIN # FUNCTION PIN # FUNCTION 1 Interlock Out 9 I Program In 2 Interlock In 10 V Program In 3 +12V 11 I Program Out 4 HV Enable 12 V Program Out 5 Local Enable 13 N/C 6 Common 14 N/C 7 I Monitor 15 N/C 8 V Monitor 16 Shield INTERFACE *Consult factory for cable connnection options. Dimensions: In. (mm) All temperatures are ambient unless otherwise noted. Voltage Multipliers Inc. 8711 W. Roosevelt Ave. Visalia, CA 93291 USA 57 Data subject to change without notice. Tel: 559.651.1402 Fax: 559.651.0740 www.voltagemultipliers.com www.highvoltagepowersupplies.com