Radial Leaded PTC Resettable Fuse : FRH 180-250XF 1. Summary (a) RoHS Compliant (Lead Free) Product (b) Applications : Wide variety of electronic equipment (c) Product Features : Low hold current Solid state, Radial leaded product ideal for up to 100V/250V (d) Operation Current : 180mA (e) Maximum Voltage : 100V/250V (f) Temperature Range : -40℃ to 85℃ 2. Agency Recognition UL : C-UL: File No. E211981 File No. E211981 3. Electrical Characteristics (23℃) Part Number FRH180-250XF Max. Time Maximum Max Oper. to Trip Current Voltage Current Time Hold Current Trip Current IH, A IT, A A Sec 0.18 0.650 3.0 2.0 Max Int. Voltage IMAX, A VMAX, Vdc VI-MAX,V 10.0 100 250 Typical Resistance Tolerance Power RMIN RMAX R1MAX Pd, W Ω Ω Ω 1.5 0.8 2.2 4.0 IH=Hold current-maximum current at which the device will not trip at 23℃ still air. V MAX=Maximum operating voltage at which the device can withstand without damage at its rated current. VI -MAX = Maximum interrupt voltage device can withstand for short period of time. (Not for long term.) I MAX= Maximum fault current device can withstand without damage at rated voltage (V MAX). RMIN=Minimum device resistance at 23℃. R1MAX=Maximum device resistance at 23℃ 1 hour after tripping . Physical specifications: Lead material: Tin plated copper, 22 AWG. Soldering characteristics:MIL-STD-202, Method 208E. Insulating coating:Flame retardant epoxy ,meet UL-94V-0 requirement. NOTE : All FRH products are designed to assist equipment to pass ITU, UL1950 or GR1089 specification. CAUTION : FRH devices are not intended for continous use of Line Voltage such as 120 VAC ~ 600VAC and above. 4. Production Dimensions (millimeter) Lead Size : 22AWG, Φ 0.65 mm Diameter Part A Number Maximum FRH180-250XF 9.0 B Maximum 12.0 NOTE : Specification subject to change without notice. C Typical 5.0 D Minimum 4.7 E Maximum 3.8 5. Thermal Derating Curve Thermal Derating Curve - FRH 180-250XF Percent of Rated Hold and Trip Current 200% 150% 100% 50% 0% -40 -20 0 20 40 60 80 Ambient Temperature (C) 6. Typical Time-To-Trip at 23℃ FRH180-250XF 1000 100 Time-to-trip (S) 10 1 0.1 0.01 0.001 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 Fault current (A) NOTE : Specification subject to change without notice. 2 2.2 2.4 2.6 2.8 3 7. Material Specification Lead material：Tin plated copper, 22 AWG. Soldering characteristics:MIL-STD-202, Method 208E. Insulating coating:Flame retardant epoxy, meets UL-94V-0 requirement 8. Part Numbering and Marking System Part Numbering System Part Marking System FRH □ □ □ ─ □ □ □ UVF RoHS Compliant / Lead Free V: High operating voltage device X: Round type M: Special type Unencapsulated part Maximum interrupt Voltage Rating Current Rating F RH180F 81AB Example F RH □ □ □ F RoHS Compliant / Lead Free Part Identification Product Family □ □ □ □ Date Code/Lot Number W a rning: -Operation beyond the specified maximum ratings or improper use may result in damage and possible electrical arcing and/or flame. -PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent condition and/or prolonged trip are not anticipated. - Avoid contact of PPTC device with chemical solvent. Prolonged contact will damage the device performance. DIP Type Recommendations of Wave Solder Profile Lead Contained Product Per-heat： 80 ℃ ~ 110℃. Per-heat time：45 seconds ~ 90 seconds Lead Contained Solder Temperature：220℃±5℃ Dwell Time：Less than 5 seconds Lead Free Product Per-heat： 80 ℃ ~ 110℃. Per-heat time：45 seconds ~ 90 seconds Lead Free Solder Temperature：260℃±5℃ Dwell Time：Less than 5 seconds FRH Series tape and reel specifications (dimensions in millimeters) Product availability : FRH080-250VF ~ FRH180-250VF and FRH150-600VF~FRH160-600VF Dimension Description MARK Dimension Dim (mm) Tol. (mm) Carrier tape width W 18 +1.0 Hold down tape width W4 11 min 3 max Top distance between tape edges Sprocket hold position W5 9 +0.75 Sprocket hold diameter D0 4 +0.2 Abscissa to plane (straight lead) H +3.0 Abscissa to plane (kinked lead) H0 18.5 16 +1.0 Abscissa to top H1 32.2 max Overall width with lead protrusion FRH080-250F~FRH180-250F and FRH150-600F~FRH160-600F C1 45.0 max Overall width without lead protrusion FRH080-250F~FRH180-250F and FRH150-600F~FRH160-600F C2 44.3 max Lead protrusion L1 1.0 max Protrusion of cutout L 8~10 max Protrusion beyond hold-down tape l2 not specified Sprocket hold pitch P0 12.7 +0.3 Device pitch : FRH080-250VF~FRH180-250VF 12.7 + 0.3 Device pitch : FRH150-600VF~FRH160-600VF 25.4 + 0.61 0.9 max 2.0 max Type thickness t Type thickness with splice Body lateral deviation △h 0 +2.0 Body tape plane deviation △P 0 + 2.0 Ordinate to adjacent component lead FRH080-250VF~FRH180-250VF P1 3.81 +0.7 Ordinate to adjacent component lead FRH150-600VF~FRH160-600VF P1 7.62 +0.7 1 FRH Series tape and reel specifications (dimensions in millimeters) Product availability : FRH080-250VF ~ FRH180-250VF and FRH150-600VF~FRH160-600VF Dimension Description MARK Dimension Dim (mm) Tol. (mm) Lead spacing : FRH080-250VF~FRH180-250VF F 5.1 + 0.6 Lead spacing : FRH150-600VF~FRH160-600VF F 5.1 Reel width W2 56 + 1.0 max a 370 max W1 max max Reel diameter Space between flanges less device Arbor hold diameter c 54 26 Core diameter n 91 Figure 1 Taped Component Dimensions 2 +12 FRH Series tape and reel specifications (dimensions in millimeters) Product availability : FRH080-250VF ~ FRH180-250VF and FRH150-600VF~FRH160-600VF Figure 2 Reel Dimensions Standard Package P/N Pcs /Bag Reel/Tape P/N Pcs /Bag Reel/Tape FRH080-250VF 300 1500 FRH145-250VF 300 1500 FRH080-250UVF 300 1500 FRH145-250UVF 300 1500 FRH110-250VF 300 1500 FRH180-250VF 200 1200 FRH110-250UVF 300 1500 FRH180-250UVF 200 1200 FRH120-250VF 300 1500 FRH150-600VF 100 600 FRH120-250UVF 300 1500 FRH160-600VF 100 600 3