SMCJ5V0(C)A - SMCJ170(C)A 1500 Watt Transient Voltage Suppressors Features • Glass-Passivated Junction • 1500 W Peak Pulse Power Capability on 10/1000 μs Waveform. • Excellent Clamping Capability • Low-Incremental Surge Resistance • Fast Response Time: Typically Less than 1.0 ps from 0 V to BV Minimum for Unidirectional and 5.0 ns for Bidirectional • Typical IR Less than 1.0 μA Above 10 V • UL Certificate #E258596 • UL94V-0 Flammability Classification SMC/DO-214AB Band denotes cathode on unidirectional devices only. No band on bi-directional devices. Bi-directional types have CA suffix where electrical characteristics apply in both directions suitable for bi-directional applications. Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted. Symbol Parameter PPPM Peak Pulse Power Dissipation on 10/1000 μs Waveform IPPM Peak Pulse Current on 10/1000 μs Waveform IFSM Non-Repetitive Peak Forward Surge Current Superimposed on Rated Load (JEDEC Method)(1) TSTG Storage Temperature Range TJ Operating Junction Temperature Value Unit 1500 W See table A 200 A -55 to 150 °C 150 °C Note: 1. Measured on 8.3 ms single half-sine wave or equivalent square wave: duty cycle = 4 pulses per minute maximum. © 2002 Fairchild Semiconductor Corporation SMCJ5V0(C)A - SMCJ170(C)A Rev. 5.7 www.fairchildsemi.com SMCJ5V0(C)A - SMCJ170(C)A — 1500 Watt Transient Voltage Suppressors September 2015 Values are at TA = 25°C unless otherwise noted. Breakdown Voltage VBR (V) Min. Max. Part Marking(2) Reverse Stand-Off Voltage VRWM (V) SMCJ5V0(C)A GDE 5.0 6.40 7.00 SMCJ6V0(C)A GDG 6.0 6.67 7.37 SMCJ6V5(C)A GDK 6.5 7.22 7.98 SMCJ7V0(C)A GDM 7.0 7.78 8.60 SMCJ7V5(C)A GDP 7.5 8.33 SMCJ8V0(C)A GDR 8.0 SMCJ8V5(C)A GDT 8.5 SMCJ9V0(C)A GDV 9.0 SMCJ10(C)A GDX 10 Uni-Directional Bi-Directional (C) Device Clamping Voltage at IPPM VC (V) Peak Pulse Current IPPM (A) Reverse Leakage at VRWM IR (μA)(3) 10 9.2 163.0 1000 10 10.3 145.6 1000 10 11.2 133.9 500 10 12.0 125.0 200 9.21 1 12.9 116.3 100 8.89 9.83 1 13.6 110.3 50 9.44 10.4 1 14.4 104.2 20 10.0 11.1 1 15.4 97.4 10 11.1 12.3 1 17.0 88.2 5 Test Current IT (mA) SMCJ11(C)A GDZ 11 12.2 13.5 1 18.2 82.4 5 SMCJ12(C)A GEE 12 13.3 14.7 1 19.9 75.3 5 SMCJ13(C)A GEG 13 14.4 15.9 1 21.5 69.8 5 SMCJ14(C)A GEK 14 15.6 17.2 1 23.2 64.7 5 SMCJ15(C)A GEM 15 16.7 18.5 1 24.4 61.5 5 SMCJ16(C)A GEP 16 17.8 19.7 1 26.0 57.7 5 SMCJ17(C)A GER 17 18.9 20.9 1 27.6 54.3 5 SMCJ18(C)A GET 18 20.0 22.1 1 29.2 51.4 5 SMCJ20(C)A GEV 20 22.2 24.5 1 32.4 46.3 5 SMCJ22(C)A GEX 22 24.4 26.9 1 35.5 42.3 5 SMCJ24(C)A GEZ 24 26.7 29.5 1 38.9 38.6 5 SMCJ26(C)A GFE 26 28.9 31.9 1 42.1 35.6 5 SMCJ28(C)A GFG 28 31.1 34.4 1 45.4 33.0 5 SMCJ30(C)A GFK 30 33.3 36.8 1 48.4 31.0 5 SMCJ33(C)A GFM 33 36.7 40.6 1 53.3 28.1 5 SMCJ36(C)A GFP 36 40.0 44.2 1 58.1 25.8 5 SMCJ40(C)A GFR 40 44.4 49.1 1 64.5 23.3 5 SMCJ43(C)A GFT 43 47.8 52.8 1 69.4 21.6 5 SMCJ45(C)A GFV 45 50.0 55.3 1 72.7 20.6 5 SMCJ48(C)A GFX 48 53.3 58.9 1 77.4 19.4 5 SMCJ51(C)A GFZ 51 56.7 62.7 1 82.4 18.2 5 SMCJ54(C)A GGE 54 60.0 66.3 1 87.1 17.2 5 SMCJ58(C)A GGG 58 64.4 71.2 1 93.6 16.0 5 SMCJ60(C)A GGK 60 66.7 73.7 1 96.8 15.5 5 SMCJ64(C)A GGM 64 71.1 78.6 1 103.0 14.6 5 SMCJ70(C)A GGP 70 77.8 86.0 1 113.0 13.3 5 SMCJ75(C)A GGR 75 83.3 92.1 1 121.0 12.4 5 SMCJ78(C)A GGT 78 86.7 95.8 1 126.0 11.9 5 Notes: 2. Color band denotes cathode on unidirectional devices only. No color band on bidirectional devices. 3. For bidirectional parts with VRWM < 10 V, the IR max limit is doubled. © 2002 Fairchild Semiconductor Corporation SMCJ5V0(C)A - SMCJ170(C)A Rev. 5.7 www.fairchildsemi.com 2 SMCJ5V0(C)A - SMCJ170(C)A — 1500 Watt Transient Voltage Suppressors Electrical Characteristics Values are at TA = 25°C unless otherwise noted. Breakdown Voltage VBR (V) Uni-Directional Bi-Directional (C) Device Part Marking(2) Reverse Stand-Off Voltage VRWM (V) Min. Max. SMCJ85(C)A GGV 85 94.4 104.0 SMCJ90(C)A GGX 90 100.0 111.0 SMCJ100(C)A GGZ 100 111.0 123.0 Test Current IT (mA) Clamping Voltage at IPPM VC (V) Peak Pulse Current IPPM (A) Reverse Leakage at VRWM IR (μA)(3) 1 137.0 10.9 5 1 146.0 10.3 5 1 162.0 9.3 5 5 SMCJ110(C)A GHE 110 122.0 135.0 1 177.0 8.5 SMCJ120(C)A GHG 120 133.0 147.0 1 193.0 7.8 5 SMCJ130(C)A GHK 130 144.0 159.0 1 209.0 7.2 5 SMCJ150(C)A GHM 150 167.0 185.0 1 243.0 6.2 5 SMCJ160(C)A GHP 160 178.0 197.0 1 259.0 5.8 5 SMCJ170(C)A GHR 170 189.0 209.0 1 275.0 5.5 5 Notes: 2. Color band denotes cathode on unidirectional devices only. No color band on bidirectional devices. 3. For bidirectional parts with VRWM < 10 V, the IR max limit is doubled. © 2002 Fairchild Semiconductor Corporation SMCJ5V0(C)A - SMCJ170(C)A Rev. 5.7 www.fairchildsemi.com 3 SMCJ5V0(C)A - SMCJ170(C)A — 1500 Watt Transient Voltage Suppressors Electrical Characteristics (Continued) PULSE POWER (kW) 100 100 PULSE POWER (%) TA = 25º C 10 1 0.1 0.0001 0.001 0.01 0.1 PULSE WIDTH (ms) 1 50 75 100 125 150 175 AMBIENT TEMPERATURE (º C) 200 TA = 25º C f = 1.0 MHz Visg = 50m Vp-p 10/1000μ μsec Waveform as Defined by R.E.A. Measured at Zero Bias 1000 Measured at Stand-Off Voltage (VRWM ) 100 e-kt td 0 0 1 2 TIME (ms) 3 10 4 Figure 3. Pulse Waveform IFSM, PEAK FORWARD SURGE CURRENT (A) 25 10000 Half Value-Ipp 2 50 0 20000 CAPACITANCE (pF) PEAK PULSE CURRENT (%) Peak Value Ippm 100 25 Figure 2. Pulse Derating Curve TA = 25º C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of Ipp μsec tf = 10μ 50 0 10 Figure 1. Peak Pulse Power Rating Curve 150 75 1 5 10 50 100 200 400 REVERSE VOLTAGE (V) Figure 4. Junction Capacitance 8.3ms Single Half Sine Wave UNIDIRECTIONAL ONLY NUMBER OF CYCLES AT 60 Hz Figure 5. Non-Repetitive Surge Current © 2002 Fairchild Semiconductor Corporation SMCJ5V0(C)A - SMCJ170(C)A Rev. 5.7 www.fairchildsemi.com 4 SMCJ5V0(C)A - SMCJ170(C)A — 1500 Watt Transient Voltage Suppressors Typical Performance Characteristics SMCJ5V0(C)A - SMCJ170(C)A — 1500 Watt Transient Voltage Suppressors Physical Dimension Figure 6. 2-LEAD, SMC, JEDEC DO-214, VARIATION AB (ACTIVE) © 2002 Fairchild Semiconductor Corporation SMCJ5V0(C)A - SMCJ170(C)A Rev. 5.7 www.fairchildsemi.com 5 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS¥ FRFET® SM Global Power Resource GreenBridge¥ Green FPS¥ Green FPS¥ e-Series¥ Gmax¥ GTO¥ IntelliMAX¥ ISOPLANAR¥ Making Small Speakers Sound Louder and Better™ MegaBuck¥ MICROCOUPLER¥ MicroFET¥ MicroPak¥ MicroPak2¥ MillerDrive¥ MotionMax¥ MotionGrid® MTi® MTx® MVN® mWSaver® OptoHiT¥ OPTOLOGIC® AccuPower¥ AttitudeEngine™ Awinda® AX-CAP®* BitSiC¥ Build it Now¥ CorePLUS¥ CorePOWER¥ CROSSVOLT¥ CTL¥ Current Transfer Logic¥ DEUXPEED® Dual Cool™ EcoSPARK® EfficientMax¥ ESBC¥ ® ® Fairchild Fairchild Semiconductor® FACT Quiet Series¥ FACT® FastvCore¥ FETBench¥ FPS¥ OPTOPLANAR® ® Power Supply WebDesigner¥ PowerTrench® PowerXS™ Programmable Active Droop¥ QFET® QS¥ Quiet Series¥ RapidConfigure¥ ¥ Saving our world, 1mW/W/kW at a time™ SignalWise¥ SmartMax¥ SMART START¥ Solutions for Your Success¥ SPM® STEALTH¥ SuperFET® SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SupreMOS® SyncFET¥ Sync-Lock™ ®* ® TinyBoost TinyBuck® TinyCalc¥ TinyLogic® TINYOPTO¥ TinyPower¥ TinyPWM¥ TinyWire¥ TranSiC¥ TriFault Detect¥ TRUECURRENT®* μSerDes¥ UHC® Ultra FRFET¥ UniFET¥ VCX¥ VisualMax¥ VoltagePlus¥ XS™ Xsens™ ❺™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. AUTHORIZED USE Unless otherwise specified in this data sheet, this product is a standard commercial product and is not intended for use in applications that require extraordinary levels of quality and reliability. This product may not be used in the following applications, unless specifically approved in writing by a Fairchild officer: (1) automotive or other transportation, (2) military/aerospace, (3) any safety critical application – including life critical medical equipment – where the failure of the Fairchild product reasonably would be expected to result in personal injury, death or property damage. Customer’s use of this product is subject to agreement of this Authorized Use policy. In the event of an unauthorized use of Fairchild’s product, Fairchild accepts no liability in the event of product failure. In other respects, this product shall be subject to Fairchild’s Worldwide Terms and Conditions of Sale, unless a separate agreement has been signed by both Parties. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Terms of Use Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I76 © Fairchild Semiconductor Corporation www.fairchildsemi.com