® MURD520/S – MURD560/S 5.0A SURFACE MOUNT GLASS PASSIVATED SUPERFAST DIODE WON-TOP ELECTRONICS Pb Features Glass Passivated Die Construction Ideally Suited for Automatic Assembly Low Profile Package High Surge Current Capability Low Power Loss, High Efficiency Super-Fast Recovery Time Ideally Suited for Use in High Frequency SMPS, Inverters and As Free Wheeling Diodes A C B J D E PIN 1 2 3 K G H L P P Mechanical Data Dim Case: DPAK/TO-252, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 0.3 grams (approx.) Mounting Position: Any Marking: Device Code, See Page 3 Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 DPAK/TO-252 Min Max A 6.05 6.65 PIN 1 B 5.05 5.55 PIN 3 C 2.25 2.40 D 1.05 1.25 E 5.48 6.08 G 2.55 3.00 H 0.55 0.90 J 0.49 0.55 Case, PIN 2 (MURD520 Series) PIN 3 Case, PIN 2 (MURD520S Series) K 0.95 1.25 L 0.49 0.55 P 2.30 Typical All Dimensions in mm Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Unit VRRM VRWM VR 200 300 400 600 V VR(RMS) 140 210 280 420 V IO 5.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 75 A Forward Voltage @IF = 5.0A VFM @TA = 25°C @TA = 100°C IRM 5.0 500 µA Reverse Recovery Time (Note 1) trr 35 nS Typical Junction Capacitance (Note 2) CJ 45 pF RθJA RθJC 49 2.0 °C/W TJ, TSTG -55 to +150 °C Peak Reverse Current At Rated DC Blocking Voltage @TC = 100°C MURD520/S MURD530/S MURD540/S MURD560/S Thermal Resistance Junction to Ambient (Note 3) Thermal Resistance Junction to Lead (Note 3) Operating and Storage Temperature Range 0.95 1.25 1.7 V Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 2 3. Mounted on PCB with 700mm copper pads. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 1 ® WON-TOP ELECTRONICS Mounted on PCB with 700mm2 Copper Pads 4.0 3.0 2.0 1.0 Resistive or Inductive Load 0 100 MURD530 MURD540 10 MURD520 MURD560 1.0 0.1 0 IFSM, PEAK FORWARD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 5.0 15 0 30 45 60 75 90 105 120 135 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 75 Single Half-Sine-Wave JEDEC Method 60 45 30 15 0 IR, INSTANTANEOUS REVERSE CURRENT (µA) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) MURD520/S – MURD560/S 0.4 0.8 1.2 1.6 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 1000 TA = 100°C 100 TA = 75°C 10 1.0 TA = 25°C 0.1 0.01 1 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics CJ, JUNCTION CAPACITANCE (pF) 75 f = 1MHz 60 45 30 15 0 0.1 www.wontop.com 2 1 10 VR, DC REVERSE VOLTAGE (V) Fig. 5 Typical Junction Capacitance 100 © Won-Top Electronics Co., Ltd. Revision: September, 2012 ® MURD520/S – MURD560/S WON-TOP ELECTRONICS MARKING INFORMATION RECOMMENDED FOOTPRINT 0.298 (7.57) 0.109 (2.77) U5xxS 0.091 (2.30) 0.24 (6.10) U5xx xx S 0.056 (1.42) = Device Number = 20 (MURD520) = 30 (MURD530) = 40 (MURD540) = 60 (MURD560) = Suffix for MURD520S Series (remove when ordering MURD520 series) 0.261 (6.63) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 8mm 330mm 16mm 4mm 1.6mm 16mm Product ID Label Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 330 2,500 340 x 337 x 45 5,000 370 x 370 x 420 40,000 18.0 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 3 ® MURD520/S – MURD560/S WON-TOP ELECTRONICS ORDERING INFORMATION Product No. Package Type Shipping Quantity MURD520/S-T3 DPAK 2500/Tape & Reel MURD530/S-T3 DPAK 2500/Tape & Reel MURD540/S-T3 DPAK 2500/Tape & Reel MURD560/S-T3 DPAK 2500/Tape & Reel 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, MURD520-T3-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 4 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: September, 2012