® MURF1600 – MURF1660 16A GLASS PASSIVATED SUPERFAST RECTIFIER WON-TOP ELECTRONICS Pb Features Glass Passivated Die Construction Superfast 35nS and 50nS Recovery Time Low Forward Voltage Drop Low Reverse Leakage Current Soft Recovery Characteristics Epoxy Meets UL 94V-0 Classification Ideally Suited for Use in High Frequency SMPS, Inverters and As Free Wheeling Diodes B C ITO-220A Min Max A 14.60 15.40 B 9.70 10.30 C 2.55 2.85 D — 4.16 E 13.00 13.80 A G PIN1 3 D Mechanical Data Dim F Case: ITO-220A, Full Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 1.9 grams (approx.) Mounting Position: Any Mounting Torque: 0.6 N.m Max. Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 E P I H L F 0.30 0.90 G 3.00 Ø 3.50 Ø H 6.30 6.90 I 4.20 4.80 J 2.50 2.90 K 0.36 0.80 L 2.60 3.30 P 4.83 5.33 All Dimensions in mm PIN 1 J PIN 3 K Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current MURF 1600 MURF 1610 MURF 1615 MURF 1620 MURF 1630 MURF 1640 MURF 1660 Unit VRRM VRWM VR 50 100 150 200 300 400 600 V VR(RMS) 35 70 105 140 210 280 420 V IO 16 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 250 A Forward Voltage @IF = 16A VFM @TC = 25°C @TC = 100°C IRM Peak Reverse Current At Rated DC Blocking Voltage @TC = 100°C Symbol Reverse Recovery Time (Note 1) trr Typical Junction Capacitance (Note 2) CJ 0.975 1.3 1.5 10 500 35 µA 50 175 V nS 145 pF Thermal Resistance Junction to Ambient Thermal Resistance Junction to Case RθJA RθJC 75 3.0 °C/W RMS Isolation Voltage, t = 1 min VISO 1500 V TJ, TSTG -65 to +175 °C Operating and Storage Temperature Range Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. © Won-Top Electronics Co., Ltd. Revision: March, 2014 www.wontop.com 1 ® WON-TOP ELECTRONICS 16 12 8 4 Resistive or Inductive Load 0 20 MURF1630 MURF1640 MURF1600 – MURF1620 10 MURF1660 1.0 0 40 60 80 100 120 140 160 180 200 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 250 Single Half-Sine-Wave JEDEC Method 200 150 100 50 0 0.4 0.8 1.2 1.6 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 1000 100 TC = 125°C TC = 100°C 10 1.0 TC = 25°C 0.1 0.01 1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 500 DC, TJ = 150°C 16 MURF1630 MURF1640 12 MURF1660 8 MURF1600 – MURF1620 4 0 CJ, JUNCTION CAPACITANCE (pF) 20 PD, POWER DISSIPATION (W) 100 0.1 0 IFSM, PEAK FORWARD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 20 IR, INSTANTANEOUS REVERSE CURRENT (µA) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) MURF1600 – MURF1660 f = 1MHz 400 300 MURF1600 – MURF1640 200 100 MURF1660 0 0 www.wontop.com 2 8 12 16 4 20 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation 0.1 1 10 VR, DC REVERSE VOLTAGE (V) Fig. 6 Typical Junction Capacitance 100 © Won-Top Electronics Co., Ltd. Revision: March, 2014 ® MURF1600 – MURF1660 WON-TOP ELECTRONICS MARKING INFORMATION MURF16xx MURF16xx x Polarity = Device Number = 00, 10, 15, 20, 30, 40 or 60 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 525 x 31 x 6 50 555 x 145 x 95 2,000 572 x 306 x 218 8,000 19.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT The full molded plastic package affords a major reduction of hardware as compared to a standard TO-220 package. However, precautions should be made in mounting procedure. 6-32 HEX Head Screw Plain Washer A conical washer should be used to apply proper force to the device. Screw should not be tightened with any type of air-forced torque or equipment that may cause crack on device package. A layer of thermal grease or thermal pad in the interface will be considerably helpful for heat dissipation. © Won-Top Electronics Co., Ltd. Revision: March, 2014 Rectifier Heatsink Conical Washer 6-32 HEX Nut www.wontop.com 3 ® MURF1600 – MURF1660 WON-TOP ELECTRONICS ORDERING INFORMATION Product No. Package Type Shipping Quantity MURF1600 ITO-220A 50 Units/Tube MURF1610 ITO-220A 50 Units/Tube MURF1615 ITO-220A 50 Units/Tube MURF1620 ITO-220A 50 Units/Tube MURF1630 ITO-220A 50 Units/Tube MURF1640 ITO-220A 50 Units/Tube MURF1660 ITO-220A 50 Units/Tube 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, MURF1600-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 4 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: March, 2014