® MUR3020 – MUR3060 30A GLASS PASSIVATED SUPERFAST RECTIFIER WON-TOP ELECTRONICS Pb Features Planar Die Construction Superfast 35nS and 50nS Recovery Time Low Forward Voltage Drop Low Reverse Leakage Current Soft Recovery Characteristics Epoxy Meets UL 94V-0 Classification Ideally Suited for Use in High Frequency SMPS, Inverters and As Free Wheeling Diodes B C TO-220A Min Max A 13.90 15.90 B 9.80 10.70 C 2.54 3.43 D 3.56 4.56 E 12.70 14.73 A G PIN1 3 D Mechanical Data Dim F Case: TO-220A, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 1.9 grams (approx.) Mounting Position: Any Mounting Torque: 0.6 N.m Max. Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 E P I H L F 0.51 0.96 G 3.55 Ø 4.09 Ø H 5.75 6.85 I 4.16 5.00 J 2.03 2.92 K 0.30 0.65 L 1.14 1.40 P 4.83 5.33 All Dimensions in mm PIN 1 J PIN 3 Case K Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current MUR3020 MUR3040 MUR3060 Unit VRRM VRWM VR 200 400 600 V VR(RMS) 140 280 420 V IO 30 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 325 A Forward Voltage @IF = 30A VFM @TC = 25°C @TC = 100°C IRM Peak Reverse Current At Rated DC Blocking Voltage @TC = 110°C Symbol Reverse Recovery Time (Note 1) trr Typical Junction Capacitance (Note 2) CJ Thermal Resistance Junction to Ambient Thermal Resistance Junction to Case Operating and Storage Temperature Range 1.1 1.3 1.5 250 1.0 35 µA mA 50 175 V nS 145 pF RθJA RθJC 73 1.2 °C/W TJ, TSTG -65 to +175 °C Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. © Won-Top Electronics Co., Ltd. Revision: March, 2014 www.wontop.com 1 ® WON-TOP ELECTRONICS 24 18 12 6 Resistive or Inductive Load 0 20 MUR3040 10 MUR3020 MUR3060 1.0 0 40 60 80 100 120 140 160 180 200 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 400 Single Half-Sine-Wave JEDEC Method 320 240 160 80 0 0.4 0.8 1.2 1.6 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 1000 TC = 175°C 100 10 TC = 100°C 1.0 0.1 TC = 25°C 0.01 1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 500 CJ, JUNCTION CAPACITANCE (pF) 50 PD, POWER DISSIPATION (W) 100 0.1 0 IFSM, PEAK FORWARD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 30 IR, INSTANTANEOUS REVERSE CURRENT (µA) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) MUR3020 – MUR3060 40 MUR3040 30 MUR3060 20 MUR3020 10 f = 1MHz 400 300 MUR3020 – MUR3040 200 100 MUR3060 DC, TJ = 150°C 0 0 0 www.wontop.com 2 20 30 40 10 50 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation 0.1 1 10 VR, DC REVERSE VOLTAGE (V) Fig. 6 Typical Junction Capacitance 100 © Won-Top Electronics Co., Ltd. Revision: March, 2014 ® MUR3020 – MUR3060 WON-TOP ELECTRONICS MARKING INFORMATION MUR30xx MUR16xx xx Polarity = Device Number = 20, 40 or 60 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 525 x 31 x 6 50 555 x 145 x 95 2,000 572 x 306 x 218 8,000 19.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT Recommended isolated mounting when screw is at heatsink potential. 4-40 hardware is used. 4-40 PAN or HEX Head Screw Plain Washer Screw should not be tightened with any type of air-forced torque or equipment that may cause high impact on device package. The insulating bushing inside the mounting hole will insure the screw threads do not contact the metal base. The interface should apply a layer of thermal grease or a highly conductive thermal pad for better heat dissipation. © Won-Top Electronics Co., Ltd. Revision: March, 2014 Insulating Bushing Rectifier Insulator Heatsink Compression Washer 4-40 HEX Nut www.wontop.com 3 ® MUR3020 – MUR3060 WON-TOP ELECTRONICS ORDERING INFORMATION Product No. Package Type Shipping Quantity MUR3020 TO-220A 50 Units/Tube MUR3040 TO-220A 50 Units/Tube MUR3060 TO-220A 50 Units/Tube 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, MUR3020-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 4 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: March, 2014