ER802 - Won-Top Electronics Co., Ltd.

®
ER800 – ER806
8.0A GLASS PASSIVATED SUPERFAST RECTIFIER
WON-TOP ELECTRONICS
Pb
Features

Glass Passivated Die Construction






Superfast 35nS and 50nS Recovery Time
Low Forward Voltage Drop
Low Reverse Leakage Current
High Surge Current Capability
Epoxy Meets UL 94V-0 Classification
Ideally Suited for Use in High Frequency
SMPS, Inverters and As Free Wheeling Diodes
B
C





TO-220A
Min
Max
A
13.90
15.90
B
9.80
10.70
C
2.54
3.43
D
3.56
4.56
E
12.70
14.73
A
G
PIN1
3
D
Mechanical Data


Dim
F
Case: TO-220A, Molded Plastic
Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: See Diagram
Weight: 1.9 grams (approx.)
Mounting Position: Any
Mounting Torque: 0.6 N.m Max.
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
E
P
I
H
L
F
0.51
0.96
G
3.55 Ø
4.09 Ø
H
5.75
6.85
I
4.16
5.00
J
2.03
2.92
K
0.30
0.65
L
1.14
1.40
P
4.83
5.33
All Dimensions in mm
PIN 1
J
PIN 3
Case
K
Maximum Ratings and Electrical Characteristics
@TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
ER
800
ER
801
ER
801A
ER
802
ER
803
ER
804
ER
806
Unit
VRRM
VRWM
VR
50
100
150
200
300
400
600
V
VR(RMS)
35
70
105
140
210
280
420
V
IO
8.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed
on Rated Load (JEDEC Method)
IFSM
125
A
Forward Voltage
@IF = 8.0A
VFM
@TC = 25°C
@TC = 100°C
IRM
Peak Reverse Current
At Rated DC Blocking Voltage
@TC = 100°C
Symbol
0.95
1.3
1.7
10
500
V
µA
Reverse Recovery Time (Note 1)
trr
35
50
nS
Typical Junction Capacitance (Note 2)
CJ
85
50
pF
Thermal Resistance Junction to Ambient
Thermal Resistance Junction to Case
Operating and Storage Temperature Range
RθJA
RθJC
73
3.0
°C/W
TJ, TSTG
-55 to +150
°C
Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
© Won-Top Electronics Co., Ltd.
Revision: September, 2012
www.wontop.com
1
®
WON-TOP ELECTRONICS
8
6
4
2
Resistive or
Inductive Load
0
15
ER803
ER804
10
ER800 – ER802
ER806
1.0
0
30 45 60 75 90 105 120 135 150
TC, CASE TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
125
Single Half-Sine-Wave
JEDEC Method
100
75
50
25
0
0.4
0.8
1.2
1.6
2.0
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
1000
100
TC = 125°C
10
TC = 100°C
1.0
TC = 25°C
0.1
0.01
1
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 4 Typical Reverse Characteristics
10
100
NUMBER OF CYCLES AT 60Hz
Fig. 3 Forward Surge Current Derating Curve
200
DC, TJ = 150°C
16
12
ER803
ER804
ER806
8
4
CJ, JUNCTION CAPACITANCE (pF)
20
PD, POWER DISSIPATION (W)
100
0.1
0
IFSM, PEAK FORWARD SURGE CURRENT (A)
IF, INSTANTANEOUS FORWARD CURRENT (A)
10
IR, INSTANTANEOUS REVERSE CURRENT (µA)
I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A)
ER800 – ER806
f = 1MHz
160
120
ER800 – ER802
80
ER803 – ER806
40
ER800 – ER802
0
0
0
www.wontop.com
2
4
6
8
2
10
IF(AV), AVERAGE FORWARD CURRENT (A)
Fig. 5 Forward Power Dissipation
0.1
1
10
VR, DC REVERSE VOLTAGE (V)
Fig. 6 Typical Junction Capacitance
100
© Won-Top Electronics Co., Ltd.
Revision: September, 2012
®
ER800 – ER806
WON-TOP ELECTRONICS
MARKING INFORMATION
ER80x
ER80x
x
Polarity
= Device Number
= 0, 1, 1A, 2, 3, 4 or 6
= As Marked on Body
PACKAGING INFORMATION
BULK
Tube Size
L x W x H (mm)
Quantity
(PCS)
Inner Box Size
L x W x H (mm)
Quantity
(PCS)
Carton Size
L x W x H (mm)
Quantity
(PCS)
Approx. Gross Weight
(KG)
525 x 31 x 6
50
555 x 145 x 95
2,000
572 x 306 x 218
8,000
19.0
Note: 1. Anti-static tube, water clear color.
RECOMMENDED SCREW MOUNTING ARRANGEMENT
Recommended isolated mounting when
screw is at heatsink potential. 4-40
hardware is used.
4-40 PAN or HEX Head Screw
Plain Washer
Screw should not be tightened with any
type of air-forced torque or equipment
that may cause high impact on device
package. The insulating bushing inside
the mounting hole will insure the screw
threads do not contact the metal base.
The interface should apply a layer of
thermal grease or a highly conductive
thermal pad for better heat dissipation.
© Won-Top Electronics Co., Ltd.
Revision: September, 2012
Insulating Bushing
Rectifier
Insulator
Heatsink
Compression Washer
4-40 HEX Nut
www.wontop.com
3
®
ER800 – ER806
WON-TOP ELECTRONICS
ORDERING INFORMATION
Product No.
Package Type
Shipping Quantity
ER800
TO-220A
50 Units/Tube
ER801
TO-220A
50 Units/Tube
ER801A
TO-220A
50 Units/Tube
ER802
TO-220A
50 Units/Tube
ER803
TO-220A
50 Units/Tube
ER804
TO-220A
50 Units/Tube
ER806
TO-220A
50 Units/Tube
1.
2.
Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
To order RoHS / Lead Free version (with Lead Free finish), add “-LF”
suffix to part number above. For example, ER800-LF.
WON-TOP ELECTRONICS and
are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and
believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the
purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein
without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road,
Chine Chen Dist., Kaohsiung 806, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www.wontop.com
www.wontop.com
4
We power your everyday.
© Won-Top Electronics Co., Ltd.
Revision: September, 2012