® MURD820CT – MURD860CT 8.0A SURFACE MOUNT GLASS PASSIVATED DUAL SUPERFAST RECTIFIER WON-TOP ELECTRONICS Pb Features Glass Passivated Die Construction Ideally Suited for Automatic Assembly Low Profile Package High Surge Current Capability Low Power Loss, High Efficiency Super-Fast Recovery Time Ideally Suited for Use in High Frequency SMPS, Inverters and As Free Wheeling Diodes A C B J D E PIN 1 2 3 K G H L P P Mechanical Data Dim Case: DPAK/TO-252, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 0.3 grams (approx.) Mounting Position: Any Marking: Device Code, See Page 3 Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 DPAK/TO-252 Min Max A 6.05 6.65 PIN 1 B 5.05 5.55 PIN 3 C 2.25 2.40 D 1.05 1.25 E 5.48 6.08 G 2.55 3.00 H 0.55 0.90 J 0.49 0.55 Case, PIN 2 K 0.95 1.25 L 0.49 0.55 P 2.30 Typical All Dimensions in mm Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 100°C Total Device Per Diode MURD820CT MURD830CT MURD840CT MURD860CT Unit VRRM VRWM VR 200 300 400 600 V VR(RMS) 140 210 280 420 V IO 8.0 4.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 100 A Forward Voltage per diode @IF = 4.0A VFM @TC = 25°C @TC = 100°C IRM Peak Reverse Current At Rated DC Blocking Voltage 0.95 1.3 1.7 10 500 V µA Reverse Recovery Time (Note 1) trr 35 50 nS Typical Junction Capacitance (Note 2) CJ 85 50 pF Thermal Resistance Junction to Ambient (Note 3) Thermal Resistance Junction to Lead (Note 3) Operating and Storage Temperature Range RθJA RθJC 80 6.5 °C/W TJ, TSTG -55 to +150 °C Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on PCB with minimum recommended pad sizes per diode. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 1 ® WON-TOP ELECTRONICS 8 6 4 2 Resistive or Inductive Load 0 15 MURD830CT MURD840CT 10 MURD820CT MURD860CT 1.0 0 30 45 60 75 90 105 120 135 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 100 Single Half-Sine-Wave JEDEC Method 80 60 40 20 0 0.4 0.8 1.2 1.6 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 1000 100 TC = 125°C 10 TC = 100°C 1.0 TC = 25°C 0.1 0.01 1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 200 DC, TJ = 150°C 16 12 MURD830CT MURD840CT MURD860CT 8 4 CJ, JUNCTION CAPACITANCE (pF) 20 PD, POWER DISSIPATION (W) 100 0.1 0 IFSM, PEAK FORWARD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 10 IR, INSTANTANEOUS REVERSE CURRENT (µA) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) MURD820CT – MURD860CT 120 MURD820CT 80 40 MURD830CT – MURD860CT MURD820CT 0 f = 1MHz 160 0 0 www.wontop.com 2 4 6 8 2 10 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation 0.1 1 10 VR, DC REVERSE VOLTAGE (V) Fig. 6 Typical Junction Capacitance 100 © Won-Top Electronics Co., Ltd. Revision: September, 2012 ® MURD820CT – MURD860CT WON-TOP ELECTRONICS MARKING INFORMATION RECOMMENDED FOOTPRINT 0.298 (7.57) 0.109 (2.77) U8xxCT 0.091 (2.30) 0.24 (6.10) U8xxCT xx 0.056 (1.42) = Device Number = 20 (MURD820CT) = 30 (MURD830CT) = 40 (MURD840CT) = 60 (MURD860CT) = As Marked on Body Polarity 0.261 (6.63) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 8mm 330mm 16mm 4mm 1.6mm 16mm Product ID Label Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 330 2,500 340 x 337 x 45 5,000 370 x 370 x 420 40,000 18.0 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 3 ® MURD820CT – MURD860CT WON-TOP ELECTRONICS ORDERING INFORMATION Product No. Package Type Shipping Quantity MURD820CT-T3 DPAK 2500/Tape & Reel MURD830CT-T3 DPAK 2500/Tape & Reel MURD840CT-T3 DPAK 2500/Tape & Reel MURD860CT-T3 DPAK 2500/Tape & Reel 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, MURD820CT-T3-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 4 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: September, 2012