5003 Series 0 1TC5003W52E2WFC3 ◆Outline(L*W*H) : 5.0*5.0*1.6mm ◆Good thermal dissipation & optical uniformity Table of Contents Features Product Code Method ----------------------------------------2 Forward current: ≦30*3mA Maximum Rating----------------------------------------------2 Typical view angle 50% Iv: 120° Typical Product Characteristics------------------------------3 RoHS and REACH-compliant Range of Bins--------------------------------------------------3 Qualified according to JEDEC moisturevity Color Coordinate Comparison ------------------------------4 Electronic-optical Characteristics---------------------------5 Level 5 Lens color: yellowish 0000000000000000000000000000000000000000000000000000000 Dimensions-----------------------------------------------------6 Reflow Profile--------------------------------------------------7 ESD level 1KV(HBM) Applications Test Circuit and Handling Precautions----------------------8 Indoor lighting applications Packing-----------------------------------------------------------9 Flat backlight for LCD. Switch and symbol Precautions-----------------------------------------------------11 Indicator and backlighting for all consumer Test Items and Results of Reliability-----------------------12 electronics Others applications 00000000000000 0 0 0 0 0 http://www.ystone.com.tw Page 1 of 12 5003 Series 0 Product Code Method ------------------------------------------------------------------------------------------------------------------------------------ 1 - T - C - 5003 - W52E - 2 - W - F - C3 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ① ② ③ ④ ⑤ Process Type Category LED Type Lead Frame Size Dice wavelength &luminous rank C: PLCC top view 50: 5.0*5.0mm 1: normal process T: SMD LED D: PLCC side view 03: 3pcs Chip Wxxx: white ⑥ ⑦ ⑧ ⑨ Lap Polarity Cap Color PCB Module Code Flow Code 2: parallel connection W: yellowish F: article mode 0000000000000000000000000000000000000000000000000000000 C3: no expression above meaning for company Maximum Rating(Ta=25℃) -----------------------------------------------------------------------------------------------------------------------------------Characteristics Symbol Rating Unit DC Forward Current IF 30*3 mA Pulse Forward Current*3 IPF 80*3 mA VR 5 V TJ 110 o TOP -40-80 o Storage Temperature Range TSTG -40-100 o Soldering Temperature*4 TSD 260 o 00000000000000Reverse Voltage 0 Junction Temperature 0 Operating Temperature Range 0 C C C C Notes 1: There is no maximum or typical voltage parameter 2: For other ambient, limited setting of current will be depended on de-rating curves. 3: Duty 1/10, pulse width 0.1ms 4: The maximum of soldering time is 5 seconds in TSD 0 0 http://www.ystone.com.tw Page 2 of 12 5003 Series 0 Typical Product Characteristics(Ta=25℃) -----------------------------------------------------------------------------------------------------------------------------------Characteristics Symbol Min. Typ. Max. Unit Test condition Forward Voltage VF 2.8 3.2 3.6 V IF=20mA*3 Luminous Intensity Iv 6000 7700 - mcd IF=20mA*3 x - 0.3696 - IF=20mA*3 y - 0.3711 - Reverse Current IR - - 10 μA VR= 5V View Angle 2θ1/2 - 120 - deg IF=20mA*3 Color Rendering Index CRI - 70 - - IF=20mA*3 Color Coordinate Notes: 1. Measurement Errors: Forward Voltage: ±0.1V, Luminous Intensity: ±10%Iv, Color Coordinate: ±0.006, CRI±5 2. Electrical-Optical Characteristics (Ta=25℃) 0000000000000000000000000000000000000000000000000000000 Range of Bins -----------------------------------------------------------------------------------------------------------------------------------1).Forward Voltage (IF = 20mA*3) VF(V) Bin Code Min. Max. B 2.8 2.9 C 2.9 3.0 D 3.0 3.1 3.1 3.2 3.2 3.3 3.3 3.4 3.4 3.5 I 3.5 3.6 J 3.6 3.7 K 3.7 3.8 E 00000000000000 F 0 0 G 0 H 2).Luminous Intensity (IF = 20mA*3) IV(mcd) 0 Bin Code Min. Max. 22 6000 7800 23 7800 10100 http://www.ystone.com.tw 0 Page 3 of 12 5003 Series 0 Color Coordinate Comparison ------------------------------------------------------------------------------------------------------------------------------------ 0000000000000000000000000000000000000000000000000000000 Color Rank BIN x y BIN 0.3706 0.3707 0.3706 0.3707 NK5 0.38 00000000000000 0 0 0 y 0.3735 0.3845 0.3674 0.3571 NK4 x 0.3657 0.3842 0.3794 0.3842 0.3794 0.388 0.3576 0.3616 0.3593 0.3745 0.3554 0.3493 NL4 0.393 0.3576 0.3616 NL5 0.3674 0.3571 0.3706 0.3707 0.3706 0.3707 0.3735 0.3845 0 0 http://www.ystone.com.tw Page 4 of 12 5003 Series 0 Electrical-Optical Characteristics Relative luminous Intensity(%) --------------------------------------------------------------------------------------------------------------------------------1). Relative Spectral Distribution 2). Typical Spatial Distribution Genealogies angle Ta=25° 4). Relative Luminous Flux .Ambient Temperature 150 125 100 75 50 Relative Luminous Flux(%) Relative Lumious Flux(%) 3). Relative Luminous Flux .Current 110% 90% 70% 50% 25 0000000000000000000000000000000000000000000000000000000 0 0 5 10 15 20 25 30 Forward Current (mA) Forward Current IF(mA) 30 25 20 15 10 5 0 Forward Current (mA) http://www.ystone.com.tw 60 80 100 115 6). Relative Forward Voltage Temperature Ambient Temperature(°) 8). Thermal Design Maximum Current(mA) Relative Luminous efficienct(%) 00000000000000 0 1.5 3 2.5 3.5 2 0 Forward Voltage VF(V) 0 7). Relative Emission Efficiency. Current 0 40 Junction Temperature(°) Relative Forward Voltage(%) 5). Electrical Characteristics 30% 20 Rth=600°/W Rth=700°/W 0 Ambient Temperature(°) Page 5 of 12 5003 Series 0 Dimensions ------------------------------------------------------------------------------------------------------------------------------------ 0.6 3 5 4 5.0 6 0.6 0.2 5 3 1 6 1.1 4 2 1.1 5.0 5.4±0.1 1 2 C1.0 3.34 0.8 5 20mA 3 20mA 20mA 1 45° 1.6 0000000000000000000000000000000000000000000000000000000 3.4 unit:mm 00000000000000 0 0 0 2 4 6 Notes: 1. All dimensions are in millimeters 2. Tolerance is ±0.1 mm unless otherwise noted 3. Specifications are subject to change without notice. 0 0 http://www.ystone.com.tw Page 6 of 12 5003 Series 0 Reflow Profile -----------------------------------------------------------------------------------------------------------------------------------1. IR reflow soldering profile for lead free solder 300 ℃ 250 temperature 10sec. max 1-5℃/sec 2-5℃/sec 230℃ max Pre heating 150-180℃ 200 260℃ max 2-5℃/sec 150 120sec.Max 50sec.max 100 50 25℃ 0 0 50 100 Time 150 200 250 300 sec 2. IR reflow soldering profile for lead solder 0000000000000000000000000000000000000000000000000000000 300 ℃ 1-5℃/sec temperature 250 Pre heating 150-180℃ 200 240℃ max 10sec. max 210℃ max 2-5℃/sec 2-5℃/sec 150 120sec.Max 50sec.max 100 50 00000000000000 0 0 0 25℃ 0 0 50 100 Time 150 200 250 300 sec Notes: 1. We recommend the reflow temperature 240℃(±5℃).the maximum soldering temperature should be limited to 260℃. 2. Don’t cause stress to the silicone resin while it is exposed to high temperature. 3. Number of reflow process shall be less than 3 times. 0 0 http://www.ystone.com.tw Page 7 of 12 5003 Series 0 Test Circuit and Handling Precautions -----------------------------------------------------------------------------------------------------------------------------------1. Test Circuit V LED 2. Handling Precautions 2.1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current 0000000000000000000000000000000000000000000000000000000 change (Burn out will happen). 2.2. Storage 1). It is recommended to store the products in the following conditions: Humidity: 60% R.H. Max. Temperature: 5℃~30℃(41℉~86℉) 2). Shelf life in sealed bag: 12 month at ＜5℃~30℃ and ＜60% R.H. after the package is Opened, the products should be used within a week or they should be keeping to stored at ≦20%R.H. with zip-lock sealed. 00000000000000 0 2.3. Baking 0 It is recommended to baking before soldering when the pack is unsealed after 24hrs. 0 The Conditions are as followings: 1). 60±3℃ X 6hrs and ＜5%RH, for reel 2). 125±3℃ X 2hrs, for single LED It shall be normal to see slight color fading of carrier (light yellow) after baking in process 0 0 http://www.ystone.com.tw Page 8 of 12 5003 Series 0 Packing ----------------------------------------------------------------------------------------------------------------------------------- Feeding Direction (Unit: mm) Dimensions of Tape (Unit: mm) Dimensions of Reel (Unit: mm) 0000000000000000000000000000000000000000000000000000000 Arrangement of Tape 00000000000000 0 0 0 Notes: 0 1. Empty component pockets are sealed with top cover tape; 2. The max loss number of SMD is 2pcs; 3. The cathode is oriented towards the tape sprocket hole in accordance with ANSI/EIA RS-481 0 specifications; 4. 1,000pcs per reel http://www.ystone.com.tw Page 9 of 12 5003 Series 0 Packing ----------------------------------------------------------------------------------------------------------------------------------- Packaging Specifications Reel(1,000pcs) Moisture-poof bag Label inspection request form 0000000000000000000000000000000000000000000000000000000 Inner box(Max. 5 reels) Label Notes: Outer box(Max. 4 inner boxes) Reeled product (max.1,000) is packed in a sealed moisture-proof bag. Five bags are packed in an inner box (size: about 260 X 230 X 100 mm) and four inner boxes are in an outer box (size: about 480 X 275 X 215 mm). On the label of moisture-poof bag, there should be the information of Part No., Lot No. and quantity number; also the total quantity number should be on inspection request 00000000000000 0 form on outer box. 0 0 0 0 http://www.ystone.com.tw Page 10 of 12 5003 Series 0 Precautions ----------------------------------------------------------------------------------------------------------------------------------1. Abnormal situation caused by improper setting of collet To choose the right collet is the key issue in improving the product’s quality. LED is different from other electronic components, which is not only about electrical output but also for optical output. This characteristic made LED more fragile in the process of SMT. If the collet’s lowering down height is not well set, it will bring damage to the gold wire at the time of collet’s picking up and loading which will cause the LED fail to light up, light up now and then or other quality problems 2. How to choose the collet During SMT, please choose the collet that has larger outer diameter than the lighting area of lens, in case that improper position of collet will damage the gold wire inside the LED. Different collets fit for different products, please refer to the following pictures cross out Outer diameter of collet should be larger than the lighting area 0000000000000000000000000000000000000000000000000000000 Picture 1() Picture 2(X) 3. Other points for attention A. No pressure should be exerted to the epoxy shell of the SMD under high temperature. B. Do not scratch or wipe the lens since the lens and gold wire inside are rather fragile and cross out easy to break. C. LED should be used as soon as possible when being taken out of the original package, and should be stored in anti-moisture and anti-ESD package. 4. This usage and handling instruction is only for your reference. 00000000000000 0 0 0 0 0 http://www.ystone.com.tw Page 11 of 12 5003 Series 0 Test Items and Results of Reliability ------------------------------------------------------------------------------------------------------------------------------ Test Item Test Conditions Duration/ Cycle Number of Damage Reference –40℃ 30min Temperature Cycle ↑↓ 1 min 85℃ 30min 100 cycles 0/22 JEITA ED-4701 300 303 High Temperature Storage Ta=100℃±5℃ 1000 hrs 0/22 EIAJED-4701 200 201 500 hrs 0/22 Tested with Brightek standard 0/22 EIAJED-4701 100 103 1000 hrs 0/22 Tested with Brightek standard 1000 hrs 0/22 Tested with Brightek standard 1000 hrs 0/22 Tested with Brightek standard High Humidity Heat Life Test Ta=85℃ RH=85% IF =20*3mA Ta=85℃ 0000000000000000000000000000000000000000000000000000000 Humidity Heat Storage 1000 hrs RH=85% Life Test Low Temperature Life Test High Temperature Life Test 00000000000000 *Criteria for Judging 0 0 Item 0 Ta=25℃ IF =20*3mA Ta=-40℃ IF =20*3mA Ta=85℃ IF =20*3mA Criteria for Judgment of Pass Symbol Condition Min Max Forward Voltage VF IF=20mA*3 - USL*1×1.1 Reverse Current IR VR= 5V - 10μA Luminous Intensity Iv IF=20mA*3 LSL*2×0.7 - [Note] USL*1: Upper Specification Level LSL*2: Lower Specification Level 0 0 http://www.ystone.com.tw Page 12 of 12