4 3 DO NOT SCALE DRAWING 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. D 60.96 2.400 TYP. EACH END 86.36 3.400 TYP. EACH END 6.35 .250 TYP. EACH END HARDWARE NTO SHOWN FOR CLARITY 2.16 .085 D 10.16 .400 ENCLOSURE MOUNTING FLANGE MODULE "B" PIN CAVITY 1A DATE ENGR 10/01/12 S MARSHALL DESCRIPTION REV B ECN #4278 30.48 1.200 TYP. EACH END M3 X 0.5 - [8.89].35 DP. TYP. 10 PLCS. USED FOR MOUNTING ENCLOSURE MODULE "A" PIN CAVITY 1A REVISIONS 43.18 1.700 TYP. EACH END 48.51 1.910 TYP. EACH END C 1 101.35 3.990 C 97.03 3.820 2.16 .085 2 4 14.22 .560 158.75 6.250 86.36 3.400 154.43 6.080 2 B B 60.96 2.400 CONNECTOR MATING VIEW 70.41 2.772 A 69.85 2.750 3 16.26 .640 .07 X 45° CUSTOMER DRAWING A VIRGINIA PANEL CORPORATION WWW.VPC.COM 4 MINIMUM .60" 3 RECOMMENDED MAXIMUM EXTERNAL HEIGHT FOR ENCLOSURE HOLE RECOMMENDED FOR HANDLE CLEARANCE IN ENCLOSURE 2 RECOMMENDED MINIMUM INTERNAL LENGTH AND WIDTH FOR ENCLOSURE 1 FOR APPLICATION USE & CARE INFORMATION CONSULT VPC USERS GUIDE @WWW.VPC.COM NOTES: 4 3 DIMENSIONS ARE SHOWN AS: [MILLIMETERS] INCHES 2 SIZE C ICON 960 ITA w/ UNLOADED MODULES FOR DISCRETE WIRING CAGE CODE 18117 SCALE: 1:2 DWG.NO. 410124104 1 410124104 4/4/07 SHEET REV B 1