4 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING 1 REVISIONS DATE 9/29/2011 DESCRIPTION REV B ECN #3549 ENGR C CHURCH D D 406.40 16.00 C 101.60 4.00 195.33 7.69 C .17 4.32 THRU TYP. 8 PLCS FOR G6 RECEIVER MOUNTING .210 THRU TYP. 2 PLCS. FOR RECEIVER MICROSWITCH WIRES SHOWN WITH G6 RECEIVER AND ITA NOT INCLUDED SHOWN WITH (2) G6 RECEIVERS NOT INCLUDED B B 370.08 14.57 258.19 10.17 TYP. 152.41 6.00 REF. 304.80 12.00 G6 RECEIVER CUTOUTS RECEIVERS NOT INCLUDED CUSTOMER DRAWING A VIRGINIA PANEL CORPORATION 2. HOUSING: MATERIAL = .06 [1.52] THICK ALUMINUM FINISH = PAINT BLACK COVER: MATERIAL = .12 [3.05] THICK ALUMINUM FINISH = BLACK ANODIZE 1. FOR APPLICATION USE & CARE INFORMATION CONSULT VPC USERS GUIDE @WWW.VPC.COM NOTES: 4 3 A WWW.VPC.COM ENCL 9050 12" W/ (2) G6 CUTOUTS RELATIVE CONNECTOR POSITIONS AND WIRE ROUTING ARE GENERIC AND MAY VARY WITH PINOUT DIMENSIONS ARE SHOWN AS: SIZE [MILLIMETERS] INCHES 2 C CAGE CODE 18117 SCALE: 1:4 DWG.NO. 410112992 1 410112992 9/16/2011 SHEET REV B 1 OF 1