BZX55B2V4 thru BZX55B75 Taiwan Semiconductor Small Signal Product 2% Tolerance Zener Diode FEATURES - Wide zener voltage range selection: 2.4V to 75V - VZ Tolerance Selection of ± 2% - Hermetically sealed glasss - Moisture sensitivity level 1 - Matte Tin(Sn) lead finish with Nickel(Ni) underplate - Pb free and RoHS compliant - All external surfaces are corrosion resistant and leads are readily solderable - ESD rating 15KV per human body model DO-35 Hermetically Sealed Glass MECHANICAL DATA - Case: DO-35 - High temperature soldering guaranteed: 260oC/10s - Polarity: Indicated by cathode band - Weight: 109 ± 4 mg MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25℃ unless otherwise noted) PARAMETER Power Dissipation Forward Voltage IF = 10 mA Thermal Resistance (Junction to Ambient) Junction and Storage Temperature Range (Note 1) SYMBO VALUE UNIT PD 500 mW VF 1 RθJA 240 TJ, TSTG - 65 to +200 V o C/W o C Note1: Valid provided that electrodes are kept at ambient temperature, and mount on PC board 50mm x 50mm x1.6mm Zener I vs. V Characteristics Document Number: DS_S1408010 VBR : Voltage at IZK IZK : Test current for voltage VBR ZZK : Dynamic impedance at IZK IZT : Test current for voltage VZ VZ : Voltage at current IZT ZZT : Dynamic impedance at IZT IZM : Maximum steady state current VZM : Voltage at IZM Version: D14 BZX55B2V4 thru BZX55B75 Taiwan Semiconductor Small Signal Product ELECTRICAL CHARACTERISTICS ( TA= 25oC unless otherwise noted ) VZ @ IZT (Volt) ZZT @ IZT (Ω) Max IZK (mA) ZZK @ IZK (Ω) Max IR @ VR(μA) Max VR (V) Nom Min Max IZT (mA) BZX55B2V4 2.4 2.35 2.45 5.0 85 1.0 600 50 1.0 BZX55B2V7 2.7 2.65 2.75 5.0 85 1.0 600 10 1.0 BZX55B3V0 3.0 2.94 3.06 5.0 85 1.0 600 4.0 1.0 BZX55B3V3 3.3 3.23 3.37 5.0 85 1.0 600 2.0 1.0 BZX55B3V6 3.6 3.53 3.67 5.0 85 1.0 600 2.0 1.0 BZX55B3V9 3.9 3.82 3.98 5.0 85 1.0 600 2.0 1.0 BZX55B4V3 4.3 4.21 4.39 5.0 75 1.0 600 1.0 1.0 BZX55B4V7 4.7 4.61 4.79 5.0 60 1.0 600 0.5 1.0 BZX55B5V1 5.1 5.00 5.20 5.0 35 1.0 550 0.1 1.0 BZX55B5V6 5.6 5.49 5.71 5.0 25 1.0 450 0.1 1.0 BZX55B6V2 6.2 6.08 6.32 5.0 10 1.0 200 0.1 2.0 BZX55B6V8 6.8 6.66 6.94 5.0 8 1.0 150 0.1 3.0 BZX55B7V5 7.5 7.35 7.65 5.0 7 1.0 50 0.1 5.0 BZX55B8V2 8.2 8.04 8.36 5.0 7 1.0 50 0.1 6.2 BZX55B9V1 9.1 8.92 9.28 5.0 10 1.0 50 0.1 6.8 BZX55B10 10 9.80 10.20 5.0 15 1.0 70 0.1 7.5 BZX55B11 11 10.78 11.22 5.0 20 1.0 70 0.1 8.2 BZX55B12 12 11.76 12.24 5.0 20 1.0 90 0.1 9.1 BZX55B13 13 12.74 13.26 5.0 26 1.0 110 0.1 10 BZX55B15 15 14.70 15.30 5.0 30 1.0 110 0.1 11 BZX55B16 16 15.68 16.32 5.0 40 1.0 170 0.1 12 BZX55B18 18 17.64 18.36 5.0 50 1.0 170 0.1 14 BZX55B20 20 19.60 20.40 5.0 55 1.0 220 0.1 15 BZX55B22 22 21.56 22.44 5.0 55 1.0 220 0.1 17 BZX55B24 24 23.52 24.48 5.0 80 1.0 220 0.1 18 BZX55B27 27 26.46 27.54 5.0 80 1.0 220 0.1 20 BZX55B30 30 29.40 30.60 5.0 80 1.0 220 0.1 22 BZX55B33 33 32.34 33.66 5.0 80 1.0 220 0.1 24 BZX55B36 36 35.28 36.72 5.0 80 1.0 220 0.1 27 BZX55B39 39 38.22 39.78 2.5 90 0.5 500 0.1 28 BZX55B43 43 42.14 43.86 2.5 90 0.5 600 0.1 32 BZX55B47 47 46.06 47.94 2.5 110 0.5 700 0.1 35 BZX55B51 51 49.98 52.02 2.5 125 0.5 700 0.1 38 BZX55B56 56 54.88 57.12 2.5 135 0.5 1000 0.1 42 BZX55B62 62 60.76 63.24 2.5 150 0.5 1000 0.1 47 BZX55B68 68 66.64 69.36 2.5 160 0.5 1000 0.1 51 BZX55B75 75 73.50 76.50 2.5 170 0.5 1000 0.1 56 Part Number Notes： 1. The Zener Voltage (VZ) is tested under pulse condition of 10ms. 2. The device numbers listed have a standard tolerance on the nomial zener voltage of ±2% 3. For detailed information on price, availability and delivery of nominal zener voltages between the voltages shown and tighter voltage tolerances, contact your nearest Taiwan Semiconductor representative. 4. The Zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an RMS value equal to 10% of the dc zener current(IZT or IZK) is superimposed to IZT or IZK. Document Number: DS_S1408010 Version: D14 BZX55B2V4 thru BZX55B75 Taiwan Semiconductor Small Signal Product RATINGS AND CHARACTERISTICS CURVES (TA=25℃ unless otherwise noted) Fig. 2 Zener Breakdown Characteristics Fig. 1 Typical Forward Characteristics 100 1000 Zener Current (mA) Forward Current (mA) TA=25oC 100 TA=75oC TA=25oC 10 10 1 0.1 0.01 1 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 0 1.2 1 2 3 4 5 Forward Voltage (V) 8 9 10 11 12 600 Power Dissipation (mW) 100 Zener Current (mA) 7 Fig. 4 Admissible Power Dissipation curve Fig. 3 Zener Breakdown Characteristics 10 1 0.1 500 400 300 200 100 0 0.01 10 20 30 40 50 60 70 0 80 40 80 120 Ambient Temperature Zener Voltage (V) Fig. 5 Typical Capacitance 160 200 (oC) Fig. 6 Effect of Zener Voltage on Impedence 1000 Dynamic Impedence(Ohm) 1000 1V Bias Capacitance (pF) 6 Zener Voltage (V) 100 10 Bias at 50% of VZ (Nom) 1 IZ=1mA 100 IZ=5mA 10 IZ=20mA 1 1 10 Zener Voltage (V) Document Number: DS_S1408010 100 1 10 100 Zener Voltage (V) Version: D14 BZX55B2V4 thru BZX55B75 Taiwan Semiconductor Small Signal Product ORDERING INFORMATION PART NO. MANUFACTURE CODE BZX55Bxxx (Note1) PACKING CODE GREEN COMPOUND CODE R0 (Note 2) G A0 PACKAGE PACKING 10K / 14" Reel DO-35 5K / Box (Ammo) Note 1: "xxx" defines voltage from 2.4V (BZX55B2V4) to 75V (BZX55B75) Note 2: Manufacture special control, if empty means no special control requirement. EXAMPLE PREFERRED P/N PART NO. BZX55B75 R0G BZX55B75 BZX55B75-L0 R0G BZX55B75 BZX55B75 BZX55B75-B0 R0G MANUFACTURE CODE PACKING CODE GREEN COMPOUND CODE DESCRIPTION R0 G Green compound L0 R0 G Green compound B0 R0 G Green compound PACKAGE OUTLINE DIMENSION DIM. Document Number: DS_S1408010 Unit (mm) Unit (inch) Min Max Min Max A 0.34 0.60 0.013 0.024 B 2.90 5.08 0.114 0.200 C 25.40 38.10 1.000 1.500 D 1.30 2.28 0.051 0.090 Version: D14 BZX55B2V4 thru BZX55B75 Taiwan Semiconductor Small Signal Product Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied,to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or seling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_S1408010 Version: D14