RT8165A - Richtek

®
RT8165A
Dual Single-Phase PWM Controller for CPU Core/GFX
Power Supply
General Description
Features
The RT8165A is a dual single-phase synchronous Buck
PWM controller with integrated gate drivers, compliant
with Intel VR12/IMVP7 specification. A serial VID (SVID)
interface is built-in in the RT8165A to communicate with
Intel VR12/IMVP7 compliant CPU. The integrated
differential remote output voltage sensing function and
built-in high accuracy DAC achieve accurate output voltage
regulation.
z
The RT8165A supports VR12/ IMVP7 compatible power
management states and VID on-the-fly function. The
RT8165A operates in two power management states
including DEM in PS2 and Forced-CCM in PS1/PS0.
Richtek's proprietary G-NAVPTM (Green Native AVP)
makes AVP (Active Voltage Positioning) design easier
and more robust. By utilizing the G-NAVPTM topology,
DEM and CCM efficiency can be improved.
z
z
z
z
z
z
z
z
z
z
z
z
The RT8165A integrates high accuracy ADC for platform
setting functions, such as no-load offset or over current
level. Individual VR ready output signals are provided for
both CORE VR and GFX VR. The IC also features
complete fault protection functions, including over voltage,
under voltage, negative voltage, over current and under
voltage lockout. The RT8165A is available in a WQFN48L 6x6 small foot print package.
z
z
z
z
Applications
z
z
z
Marking Information
RT8165AGQW
RT8165AGQW : Product Number
RT8165A
GQW
YMDNN
G-NAVPTM (Green Native Active Voltage Positioning)
Topology
Dual Output Controller with Two Built-in Gate
Drivers
Serial VID Interface
0.5% DAC Accuracy
Differential Remote Output Voltage Sensing
Built-in ADC for Platform Programming
Diode Emulation Mode (DEM) at Light Load
Condition
Droop Enable/Disable
Fast Transient Response
VR12/IMVP7 Compatible Power Management
States
VR Ready Indicator
Thermal Throttling Indicator
Current Monitor Output
Switching Frequency up to 1MHz per Phase
Protection : OVP, UVP, NVP, OCP, UVLO
Small 48-Lead WQFN Package
RoHS Compliant and Halogen Free
VR12 / IMVP7 Intel CPU Core Supply
AVP Step-down Converter
Notebook/ Netbook/ Desktop Computer CPU Core
Supply
Ordering Information
RT8165A
YMDNN : Date Code
Package Type
QW : WQFN-48L 6x6 (W-Type)
(Exposed Pad-Option 1)
RT8165AZQW
RT8165A
ZQW
YMDNN
Lead Plating System
G : Green (Halogen Free and Pb Free)
Z : ECO (Ecological Element with
Halogen Free and Pb free)
RT8165AZQW : Product Number
Note :
YMDNN : Date Code
Richtek products are :
`
requirements of IPC/JEDEC J-STD-020.
`
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
RoHS compliant and compatible with the current
Suitable for use in SnPb or Pb-free soldering processes.
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
1
RT8165A
Pin Configurations
TONSET
BOOT
UGATE
PHASE
LGATE
PVCC
LGATEA
PHASEA
UGATEA
BOOTA
EN
TONSETA
(TOP VIEW)
48 47 46 45 44 43 42 41 40 39 38 37
ISEN1P
ISEN1N
COMP
FB
RGND
IMON
IMONFB
DRPEN
OFS
OFSA
GFXPS2
VCC
1
36
2
35
3
34
4
33
5
32
6
31
GND
7
30
8
29
9
28
49
10
11
27
26
12
25
ISENAP
ISENAN
COMPA
FBA
RGNDA
IMONA
IMONFBA
VCLK
VDIO
ALERT
DRPENA
VRA_READY
SETINIA
SETINI
TMPMAX
ICCMAX
ICCMAXA
TSEN
OCSET
TSENA
OCSETA
IBIAS
VRHOT
VR_READY
13 14 15 16 17 18 19 20 21 22 23 24
WQFN-48L 6x6
Functional Pin Description
Pin No.
Pin Name
Pin Function
1
ISEN1P
Positive Current Sense Input of CORE VR
2
ISEN1N
Negative Current Sense Input of CORE VR
3
COMP
CORE VR Compensation. This pin is the output node of the error amplifier.
4
FB
CORE VR Feedback. This is the negative input node of the error amplifier.
5
RGND
Return Ground for CORE VR. This pin is the negative input for differential remote
voltage sensing.
6
IMON
Current Monitor Output of CORE VR. The output voltage V IMON of this pin is
proportional to the output current. For digital output current reporting, detailed
VIMON is generated by built-in ADC.
7
IMONFB
This pin is used to externally set the current monitor output gain of CORE VR.
Connect this pin with one resistor R IMONFB to CORE VCC_SENSE while IMON pin
is connected to ground with another resistor, RIMON. The current monitor output
gain can be set by the ratio of these two resistors.
8
DRPEN
Droop Enable Mode Setting of CORE VR. An internal 80μA current source is
connected to the DRPEN pin and flows out of this pin for 10μs. Connect this pin to
VCC to enable droop function. Connect this pin to GND to disable droop function.
9
OFS
Output Voltage No-Load Offset Setting of CORE VR. Connect to a resistive voltage
divider from VCC to GND to set the pin voltage V OFS for offset setting. Connect this
pin to GND for no offset setting.
10
OFSA
Output Voltage No-Load Offset Setting of GFX VR. Connect to a resistive voltage
divider from VCC to GND to set the pin voltage V OFSA for offset setting. Connect this
pin to GND for no offset setting.
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
2
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
Pin No.
Pin Name
Pin Function
11
GFXPS2
Forced DEM Enable Setting of GFX VR. Connect to V CC for forced-DEM setting
and connect to GND for following SVID power state command.
12
VCC
5V Power Supply Input of Controller. Bypass this pin to GND with a 1μF or greater
ceramic capacitor.
13
SETINIA
Initial Startup Voltage VINI_GFX Setting of GFX VR. Connect to a resistive voltage
divider from V CC to GND to set the pin voltage VSETINIA for GFX VR initial startup
voltage VINI_GFX setting. Connect this pin to GND for 0V VINI_GFX setting.
14
SETINI
Initial Startup Voltage VINI_CORE Setting of CORE VR. Connect to a resistive
voltage divider from VCC to GND to set the pin voltage VSETINI for CORE VR initial
startup voltage VINI_CORE setting. Connect this pin to GND for 0V V INI_CORE setting.
15
TMPMAX
Maximum Temperature Setting of CORE VR. Connect to a resistive voltage divider
from V CC to GND to set the pin voltage V TMPMAX for TMPMAX setting.
16
ICCMAX
Maximum Current Setting of CORE VR. Connect to a resistive voltage divider from
VCC to GND to set the pin voltage VICCMAX for ICCMAX setting.
17
ICCMAXA
Maximum Current Setting of GFX VR. Connect to a resistive voltage divider from
VCC to GND to set the pin voltage VICCMAXA for ICCMAXA setting.
18
TSEN
Thermal Monitor Sense Pin of CORE VR.
19
OCSET
20
TSENA
21
OCSETA
22
IBIAS
23
VRHOT
Thermal Monitor Output (Active Low). Connect a pull high resistor from VRHOT pin
to 1.05V.
24
VR_READY
Voltage Ready Indicator of CORE VR. Connect a pull high resistor from
VR_READY pin to 1.05V.
25
VRA_READY
Voltage Ready Indicator GFX VR. Connect a pull high resistor from VRA_READY
pin to 1.05V.
26
DRPENA
Droop Enable Mode Setting of GFX VR. An internal 80μA current source is
connected to DRPENA pin and flows out of this pin for 10μs. Connect this pin to
VCC to enable droop function. Connect this pin to GND to disable droop function.
27
ALERT
SVID Alert Pin (Active Low). Connect a 75Ω resistor from ALERT pin to 1.05V.
28
VDIO
29
VCLK
30
IMONFBA
31
IMONA
Over Current Protection Setting of CORE VR. Connect to a resistive voltage divider
from VCC to GND to set the pin voltage VOCSET from 0 to 3.3V for CORE VR over
current protection threshold.
Thermal Monitor Sense Pin of GFX VR.
Over Current Protection Setting of GFX VR. Connect to a resistive voltage divider
from VCC to GND to adjust the pin voltage VOCSETA from 0 to 3.3V for GFX VR over
current protection threshold.
Internal bias current setting. Connect a 53.6kΩ resistor from IBIAS pin to GND.
Controller and CPU Data Transmission Interface. Connecting a 64.9Ω resistor
between VDIO pin to 1.05V.
Synchronous Clock from the CPU. Connect a 64.9Ω resistor from VCLK pin to
1.05V.
This pin is used to externally set the current monitor output gain of GFX VR.
Connect this pin with one resistor RIMONFBA to GFX VCC_SENSE while IMON pin
is connected to ground with another resistor RIMONA. The current monitor output
gain can be set by the ratio of these two resistors.
Current Monitor Output of GFX VR. The output voltage VIMONA of this pin is
proportional to the output current. For digital output current reporting, detailed
VIMONA is generated by built-in ADC.
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
3
RT8165A
Pin No.
Pin Name
Pin Function
32
RGNDA
Return Ground for GFX VR. This pin is the negative input for differential
remote voltage sensing.
33
FBA
GFX VR Feedback. This is the negative input node of the error amplifier.
34
COMPA
GFX VR Compensation. This pin is the output node of the error amplifier.
35
ISENAN
Negative Current Sense Input of GFX VR.
36
ISENAP
Positive Current Sense Input of GFX VR.
37
TONSETA
On-Time Setting of GFX VR. Connect this pin to VIN with one resistor.
38
EN
Chip Enable (Active High).
39
BOOTA
Bootstrap Flying Capacitor Connection for GFX VR. This pin powers the high
side MOSFET drivers. Connect this pin to PHASEA with an external ceramic
capacitor.
40
UGATEA
High Side MOSFET Floating Gate Driver Output for GFX VR. Connect this
pin to the gate of high side MOSFET.
41
PHASEA
42
LGATEA
43
PVCC
44
LGATE
45
PHASE
46
UGATE
47
BOOT
Bootstrap Flying Capacitor Connection for CORE VR. This pin powers the
high side MOSFET drivers. Connect this pin to PHASE with an external
ceramic capacitor.
48
TONSET
On-Time Setting of CORE VR. Connect this pin to VIN with one resistor.
GND
Ground. The exposed pad must be soldered to a large PCB and connected to
GND for maximum power dissipation.
49 (Exposed pad)
Switching Node Connection for GFX VR. PHASEA is also the zero cross
detect input for GFX VR. Connect this pin to the high side MOSFET sources
together with the low side MOSFET drains and the inductor.
Synchronous-Rectifier Gate Driver Output of GFX VR. Connect this pin to the
gate of low side MOSFET.
5V Power Supply of Driver. Bypass this pin to GND with a 1μF or greater
ceramic capacitor.
Synchronous-Rectifier Gate Driver Output of CORE VR. Connect this pin to
the gate of low side MOSFET.
Switching Node Connection for CORE VR. PHASE is the internal lower
supply rail for the UGATE. PHASE is also the zero cross detect input for
CORE VR. Connect this pin to the high side MOSFET sources together with
the low side MOSFET drains and the inductor.
High Side MOSFET Floating Gate Driver Output for CORE VR. Connect this
pin to the gate of high side MOSFET.
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
4
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
Typical Application Circuit
R1
2.2
5V
RT8165A
VCC
TONSET 48
12
R3
5.1
VIN
5V to 25V
C2
0.1µF
VCC
C1
1µF
BOOT
47
R4
0
Q1
C4
10µF
UGATE 46
VCCP
R6
130
R7
130
R8
150
R9
10k
R10
10k
R5
0
R11
75
29
28
27
25
24
23
VCLK
VDIO
ALERT
VRA_READY
VR_READY
VRHOT
PHASE
VCLK
VDIO
ALERT
VRA_READY
VR_READY
VRHOT
44
LGATE
43
PVCC
26
8
21
19
13
14
R12
Optional
0
5V
IMONFB
FB
RNTC1
4.7k
R14 3.9k
R16
2.4k
R15
4.7k
2
C9
Optional R23
10k
7
4
Optional
C11
R24
0
C10
Optional
Optional
C12
CORE VCC_ SENSE
COMP
3
5
RGND
6
IMON
R28 R29 R30 R31 R32 R33
NC NC 10k 10k NC NC
C6
330µF
/9m
C26
330µF
/9m
C7
ISEN1P 1
ISEN1N
DRPENA
DRPEN
OCSETA
OCSET
SETINIA
SETINI
DCR 7.6m
R13
C8
1µF
VCORE
L1
1µH
Q2
C5
0.068µF
C25
R17 R18 R19 R20 R21 R22
10k 10k 27k 8.7k 10k 10k
C3
0.1µF
45
Optional
VCC
DRPENA
DRPEN
OCSETA
OCSET
SETINIA
SETINI
R2
130k
VCORE
R27
100
R26
10k
R25
71k
CORE VSS_SENSE
IMON
C13
0.1µF
VCC
R34
100
R35
620k
R36
39k
TONSETA
37
TMPMAX
ICCMAX
ICCMAXA
OFSA
OFS
GFXPS2
R37 R38 R39 R40 R41 R42
51k 150k 100k NC NC NC
15
16
17
10
9
11
TMPMAX
ICCMAX
ICCMAXA
OFSA
OFS
GFXPS2
BOTTA
39
R43
R44
VIN
5V to 25
C14
0.1µF
R45
0
Q3
R46
0
PHASEA
C15
0.1µF
41
LGATEA 42
Optional
VCC
RNTC T1
10k
ß = 3380
R71
750
R62
1k
R59
12k
C17
R63
1k
ISENAN
TSENA
18
TSEN
22
IBIAS
R64
53.6k
COMPA
RGNDA
EN
38
EN
IMONA
Optional
C22
R60
10k
R61
0
C21
Optional
Optional
C23
GFX VCC_SENSE
34
32
R65
42k
IMONA
C24
0.1µF
VGFX
R67
100
R66
10k
31
GND
49 (Exposed Pad)
C19
330µF
/15m
R56
1k
35
IMONFBA 30
33
FBA
C27
330µF
/15m
R57
1.2k
C20
Optional
20
RNTCA
1k
R55 11k
C18
0.1µF
RNTCTA
10k
ß = 3380
R72
750
DCR 14.6m
R54
ISENAP 36
VGFX
L2
2µH
Q4
R53
0
R47 R48 R49 R50 R51 R52
0
10k
33k 5.1k 1.6k 0
R58
12k
C16
10µF
UGATEA 40
R69
180k
GFX VSS_SENSE
R68
100
R70
1.8M
Figure 1. Dual Output Application Circuit
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
5
RT8165A
RT8165A
VCC
R1
2.2
5V
12
TONSET 48
VCC
C1
1µF
R2
130k
R3
5.1
BOOT
VCCP
47
R4 0
Q1
UGATE 46
R6
130
R7
130
R8
150
R9
10k
R5 0
R10
75
29
28
27
24
23
VCLK
VDIO
ALERT
VR_READY
VRHOT
PHASE
VCLK
VDIO
ALERT
VR_READY
VRHOT
C3
0.1µF
45
C5
0.068µF
ISEN1N
R27
NC
DCR 7.6m
R12
C7
RNTC1
4.7k
C26
330µF
/9m
C6
330µF
/9m
2
R15
2.4k
R14
4.7k
C9
Optional
8
DRPEN
19 OCSET
14
SETINI
DRPEN
OCSET
SETINI
VCORE
R13 3.9k
C25
R17 R18
8.7k 10k
L1
1µH
Optional
5V
ISEN1P 1
R16
10k
C4
10µF
Q2
44 R11 0
LGATE
43
PVCC
C8
1µF
Optional
VCC
VIN
5V to 25
C2
0.1µF
R20
0
R19
10k
7
IMONFB
FB 4
R28 R29
10k NC
C10
Optional
Optional Optional
CORE VCC_SENSE
COMP
RGND
VCC
R30
51k
R31
150k
IMON
R32
NC
3
5
C11
C12
R21
71k
R22
10k
6
IMON
C13
0.1µF
15
TMPMAX
16
ICCMAX
9
OFS
TMPMAX
ICCMAX
OFS
TONSETA
BOOTA
R33
33k
R34
5.1k
R35
0
VCC
R36
12k
NTCT1
10k
ß = 3380
18
R39
750
R37
1k
22
TSEN
IBIAS
R38
53.6k
EN
38
EN
37
39
UGATEA 40
41
PHASEA
42
LGATEA
25
VRA_READY
10
OFSA
17
ICCMAXA
11
GFXPS2
21
OCSETA
26
DRPENA
36
ISENAP
IMONFBA 30
33
FBA
34
COMPA
31
IMONA
35
ISENAN
20
TSENA
RGNDA 32
13
SETINIA
VCORE
R23
100
R24
620k
CORE VSS_SENSE
R26
100k
R25
39k
GND
Floating
Floating
Floating
Floating
GND
GND
VCC
GND
VCC
GND
VCC
VCC
Floating
Floating
GND
VCC
VCC
GND
GND
GND
49 (Exposed Pad)
Figure 2. Single Output Application Circuit
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
6
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
OFSA
VREFA
OFS Control
FBA
-
+
-
Offset
Cancellation
+
GFX 0LL VCS
/5
+
10
-
ISENAN
VR_READY
VRA_READY
VRHOT
CORE VR
Protection Signal
CORE VR
VID/OFS Control
GFX VR
Protection Signal
Droop Enabler
DRPENA
GFX VR CCRCOT
PWM Generator
TONSETA
GM
COMPA
ISENAP
GFXPS2
GND
GFX 0LL EN
ERROR
AMP
+
Slew Rate Control
VCC
EN
ICCMAXA
CORE VR Slew
Rate control
GFX VR
Slew Rate control
CORE VR
Operation Mode
GFX VR Slew
Rate control
Control & Protection Logic
GFX VR
VID/OFS Control
DAC
ICCMAX
ADC
SVID XCVR
GFX VR
VID/OFS control
RGNDA
TSEN
TSENA
MUX
GFX VR
Operation Mode
VREFA
GFX 0LL EN
GFX 0LL VCS
SETINI
SETINIA
TMPMAX
ALERT
VDIO
VCLK
UVLO
GFX VR
Current Monitor
CORE 0LL VCS
VREF
CORE 0LL EN
CORE VR
Current Monitor
IMONFBA
IMONA
IMON
IMONFB
Function Block Diagram
GFX 0LL EN
X4.8
VREFA
PWM CMP
BOOTA
GFX VR OCP
Current
Sense AMP
UGATEA
GFX VR
Protection Signal
OCSETA
PHASEA
Driver logic
control
PVCC
GFX VR
OV/UV/NV
OFS
CORE VR
Slew Rate control
DAC
OFS Control
VREF
Slew Rate Control
ERROR
AMP
+
-
FB
CORE 0LL EN
GM
+
-
Offset
Cancellation
+
RGND
COMP
CORE 0LL VCS
ISEN1P
ISEN1N
LGATEA
GFX VR
Operation Mode
CORE VR
VID/OFS Control
+
10
-
/5
VREF
Droop Enabler
DRPEN
CORE VR
CCRCOT
PWM Generator
TONSET
PWM CMP
CORE 0LL EN
X4.8
Current
Sense AMP
BOOT
CORE VR
OCP
UGATE
CORE VR
Protection Signal
OCSET
PHASE
Driver logic
control
PVDD
CORE VR
OV/UV/NV
IBIAS
2.14V
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
CORE VR
Operation Mode
LGATE
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
7
RT8165A
Table 1. IMVP7/VR12 Compliant VID Table
VID7
VID6
VID5
VID4
VID3
VID2
VID1
VID0
H1
H0
VDAC Voltage
0
0
0
0
0
0
0
0
0
0
0.000
0
0
0
0
0
0
0
1
0
1
0.250
0
0
0
0
0
0
1
0
0
2
0.255
0
0
0
0
0
0
1
1
0
3
0.260
0
0
0
0
0
1
0
0
0
4
0.265
0
0
0
0
0
1
0
1
0
5
0.270
0
0
0
0
0
1
1
0
0
6
0.275
0
0
0
0
0
1
1
1
0
7
0.280
0
0
0
0
1
0
0
0
0
8
0.285
0
0
0
0
1
0
0
1
0
9
0.290
0
0
0
0
1
0
1
0
0
A
0.295
0
0
0
0
1
0
1
1
0
B
0.300
0
0
0
0
1
1
0
0
0
C
0.305
0
0
0
0
1
1
0
1
0
D
0.310
0
0
0
0
1
1
1
0
0
E
0.315
0
0
0
0
1
1
1
1
0
F
0.320
0
0
0
1
0
0
0
0
1
0
0.325
0
0
0
1
0
0
0
1
1
1
0.330
0
0
0
1
0
0
1
0
1
2
0.335
0
0
0
1
0
0
1
1
1
3
0.340
0
0
0
1
0
1
0
0
1
4
0.345
0
0
0
1
0
1
0
1
1
5
0.350
0
0
0
1
0
1
1
0
1
6
0.355
0
0
0
1
0
1
1
1
1
7
0.360
0
0
0
1
1
0
0
0
1
8
0.365
0
0
0
1
1
0
0
1
1
9
0.370
0
0
0
1
1
0
1
0
1
A
0.375
0
0
0
1
1
0
1
1
1
B
0.380
0
0
0
1
1
1
0
0
1
C
0.385
0
0
0
1
1
1
0
1
1
D
0.390
0
0
0
1
1
1
1
0
1
E
0.395
0
0
0
1
1
1
1
1
1
F
0.400
0
0
1
0
0
0
0
0
2
0
0.405
0
0
1
0
0
0
0
1
2
1
0.410
0
0
1
0
0
0
1
0
2
2
0.415
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
8
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
VID7
VID6
VID5
VID4
VID3
VID2
VID1
VID0
H1
H0
DAC Voltage
0
0
1
0
0
0
1
1
2
3
0.420
0
0
1
0
0
1
0
0
2
4
0.425
0
0
1
0
0
1
0
1
2
5
0.430
0
0
1
0
0
1
1
0
2
6
0.435
0
0
1
0
0
1
1
1
2
7
0.440
0
0
1
0
1
0
0
0
2
8
0.445
0
0
1
0
1
0
0
1
2
9
0.450
0
0
1
0
1
0
1
0
2
A
0.455
0
0
1
0
1
0
1
1
2
B
0.460
0
0
1
0
1
1
0
0
2
C
0.465
0
0
1
0
1
1
0
1
2
D
0.470
0
0
1
0
1
1
1
0
2
E
0.475
0
0
1
0
1
1
1
1
2
F
0.480
0
0
1
1
0
0
0
0
3
0
0.485
0
0
1
1
0
0
0
1
3
1
0.490
0
0
1
1
0
0
1
0
3
2
0.495
0
0
1
1
0
0
1
1
3
3
0.500
0
0
1
1
0
1
0
0
3
4
0.505
0
0
1
1
0
1
0
1
3
5
0.510
0
0
1
1
0
1
1
0
3
6
0.515
0
0
1
1
0
1
1
1
3
7
0.520
0
0
1
1
1
0
0
0
3
8
0.525
0
0
1
1
1
0
0
1
3
9
0.530
0
0
1
1
1
0
1
0
3
A
0.535
0
0
1
1
1
0
1
1
3
B
0.540
0
0
1
1
1
1
0
0
3
C
0.545
0
0
1
1
1
1
0
1
3
D
0.550
0
0
1
1
1
1
1
0
3
E
0.555
0
0
1
1
1
1
1
1
3
F
0.560
0
1
0
0
0
0
0
0
4
0
0.565
0
1
0
0
0
0
0
1
4
1
0.570
0
1
0
0
0
0
1
0
4
2
0.575
0
1
0
0
0
0
1
1
4
3
0.580
0
1
0
0
0
1
0
0
4
4
0.585
0
1
0
0
0
1
0
1
4
5
0.590
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
9
RT8165A
VID7
VID6
VID5
VID4
VID3
VID2
VID1
VID0
H1
H0
DAC Voltage
0
1
0
0
0
1
1
0
4
6
0.595
0
1
0
0
0
1
1
1
4
7
0.600
0
1
0
0
1
0
0
0
4
8
0.605
0
1
0
0
1
0
0
1
4
9
0.610
0
1
0
0
1
0
1
0
4
A
0.615
0
1
0
0
1
0
1
1
4
B
0.620
0
1
0
0
1
1
0
0
4
C
0.625
0
1
0
0
1
1
0
1
4
D
0.630
0
1
0
0
1
1
1
0
4
E
0.635
0
1
0
0
1
1
1
1
4
F
0.640
0
1
0
1
0
0
0
0
5
0
0.645
0
1
0
1
0
0
0
1
5
1
0.650
0
1
0
1
0
0
1
0
5
2
0.655
0
1
0
1
0
0
1
1
5
3
0.660
0
1
0
1
0
1
0
0
5
4
0.665
0
1
0
1
0
1
0
1
5
5
0.670
0
1
0
1
0
1
1
0
5
6
0.675
0
1
0
1
0
1
1
1
5
7
0.680
0
1
0
1
1
0
0
0
5
8
0.685
0
1
0
1
1
0
0
1
5
9
0.690
0
1
0
1
1
0
1
0
5
A
0.695
0
1
0
1
1
0
1
1
5
B
0.700
0
1
0
1
1
1
0
0
5
C
0.705
0
1
0
1
1
1
0
1
5
D
0.710
0
1
0
1
1
1
1
0
5
E
0.715
0
1
0
1
1
1
1
1
5
F
0.720
0
1
1
0
0
0
0
0
6
0
0.725
0
1
1
0
0
0
0
1
6
1
0.730
0
1
1
0
0
0
1
0
6
2
0.735
0
1
1
0
0
0
1
1
6
3
0.740
0
1
1
0
0
1
0
0
6
4
0.745
0
1
1
0
0
1
0
1
6
5
0.750
0
1
1
0
0
1
1
0
6
6
0.755
0
1
1
0
0
1
1
1
6
7
0.760
0
1
1
0
1
0
0
0
6
8
0.765
0
1
1
0
1
0
0
1
6
9
0.770
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
10
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
VID7
VID6
VID5
VID4
VID3
VID2
VID1
VID0
H1
H0
DAC Voltage
0
1
1
0
1
0
1
0
6
A
0.775
0
1
1
0
1
0
1
1
6
B
0.780
0
1
1
0
1
1
0
0
6
C
0.785
0
1
1
0
1
1
0
1
6
D
0.790
0
1
1
0
1
1
1
0
6
E
0.795
0
1
1
0
1
1
1
1
6
F
0.800
0
1
1
1
0
0
0
0
7
0
0.805
0
1
1
1
0
0
0
1
7
1
0.810
0
1
1
1
0
0
1
0
7
2
0.815
0
1
1
1
0
0
1
1
7
3
0.820
0
1
1
1
0
1
0
0
7
4
0.825
0
1
1
1
0
1
0
1
7
5
0.830
0
1
1
1
0
1
1
0
7
6
0.835
0
1
1
1
0
1
1
1
7
7
0.840
0
1
1
1
1
0
0
0
7
8
0.845
0
1
1
1
1
0
0
1
7
9
0.850
0
1
1
1
1
0
1
0
7
A
0.855
0
1
1
1
1
0
1
1
7
B
0.860
0
1
1
1
1
1
0
0
7
C
0.865
0
1
1
1
1
1
0
1
7
D
0.870
0
1
1
1
1
1
1
0
7
E
0.875
0
1
1
1
1
1
1
1
7
F
0.880
1
0
0
0
0
0
0
0
8
0
0.885
1
0
0
0
0
0
0
1
8
1
0.890
1
0
0
0
0
0
1
0
8
2
0.895
1
0
0
0
0
0
1
1
8
3
0.900
1
0
0
0
0
1
0
0
8
4
0.905
1
0
0
0
0
1
0
1
8
5
0.910
1
0
0
0
0
1
1
0
8
6
0.915
1
0
0
0
0
1
1
1
8
7
0.920
1
0
0
0
1
0
0
0
8
8
0.925
1
0
0
0
1
0
0
1
8
9
0.930
1
0
0
0
1
0
1
0
8
A
0.935
1
0
0
0
1
0
1
1
8
B
0.940
1
0
0
0
1
1
0
0
8
C
0.945
1
0
0
0
1
1
0
1
8
D
0.950
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
11
RT8165A
VID7
VID6
VID5
VID4
VID3
VID2
VID1
VID0
H1
H0
DAC Voltage
1
0
0
0
1
1
1
0
8
E
0.955
1
0
0
0
1
1
1
1
8
F
0.960
1
0
0
1
0
0
0
0
9
0
0.965
1
0
0
1
0
0
0
1
9
1
0.970
1
0
0
1
0
0
1
0
9
2
0.975
1
0
0
1
0
0
1
1
9
3
0.980
1
0
0
1
0
1
0
0
9
4
0.985
1
0
0
1
0
1
0
1
9
5
0.990
1
0
0
1
0
1
1
0
9
6
0.995
1
0
0
1
0
1
1
1
9
7
1.000
1
0
0
1
1
0
0
0
9
8
1.005
1
0
0
1
1
0
0
1
9
9
1.010
1
0
0
1
1
0
1
0
9
A
1.015
1
0
0
1
1
0
1
1
9
B
1.020
1
0
0
1
1
1
0
0
9
C
1.025
1
0
0
1
1
1
0
1
9
D
1.030
1
0
0
1
1
1
1
0
9
E
1.035
1
0
0
1
1
1
1
1
9
F
1.040
1
0
1
0
0
0
0
0
A
0
1.045
1
0
1
0
0
0
0
1
A
1
1.050
1
0
1
0
0
0
1
0
A
2
1.055
1
0
1
0
0
0
1
1
A
3
1.060
1
0
1
0
0
1
0
0
A
4
1.065
1
0
1
0
0
1
0
1
A
5
1.070
1
0
1
0
0
1
1
0
A
6
1.075
1
0
1
0
0
1
1
1
A
7
1.080
1
0
1
0
1
0
0
0
A
8
1.085
1
0
1
0
1
0
0
1
A
9
1.090
1
0
1
0
1
0
1
0
A
A
1.095
1
0
1
0
1
0
1
1
A
B
1.100
1
0
1
0
1
1
0
0
A
C
1.105
1
0
1
0
1
1
0
1
A
D
1.110
1
0
1
0
1
1
1
0
A
E
1.115
1
0
1
0
1
1
1
1
A
F
1.120
1
0
1
1
0
0
0
0
B
0
1.125
1
0
1
1
0
0
0
1
B
1
1.130
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
12
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
VID7
VID6
VID5
VID4
VID3
VID2
VID1
VID0
H1
H0
DAC Voltage
1
0
1
1
0
0
1
0
B
2
1.135
1
0
1
1
0
0
1
1
B
3
1.140
1
0
1
1
0
1
0
0
B
4
1.145
1
0
1
1
0
1
0
1
B
5
1.150
1
0
1
1
0
1
1
0
B
6
1.155
1
0
1
1
0
1
1
1
B
7
1.160
1
0
1
1
1
0
0
0
B
8
1.165
1
0
1
1
1
0
0
1
B
9
1.170
1
0
1
1
1
0
1
0
B
A
1.175
1
0
1
1
1
0
1
1
B
B
1.180
1
0
1
1
1
1
0
0
B
C
1.185
1
0
1
1
1
1
0
1
B
D
1.190
1
0
1
1
1
1
1
0
B
E
1.195
1
0
1
1
1
1
1
1
B
F
1.200
1
1
0
0
0
0
0
0
C
0
1.205
1
1
0
0
0
0
0
1
C
1
1.210
1
1
0
0
0
0
1
0
C
2
1.215
1
1
0
0
0
0
1
1
C
3
1.220
1
1
0
0
0
1
0
0
C
4
1.225
1
1
0
0
0
1
0
1
C
5
1.230
1
1
0
0
0
1
1
0
C
6
1.235
1
1
0
0
0
1
1
1
C
7
1.240
1
1
0
0
1
0
0
0
C
8
1.245
1
1
0
0
1
0
0
1
C
9
1.250
1
1
0
0
1
0
1
0
C
A
1.255
1
1
0
0
1
0
1
1
C
B
1.260
1
1
0
0
1
1
0
0
C
C
1.265
1
1
0
0
1
1
0
1
C
D
1.270
1
1
0
0
1
1
1
0
C
E
1.275
1
1
0
0
1
1
1
1
C
F
1.280
1
1
0
1
0
0
0
0
D
0
1.285
1
1
0
1
0
0
0
1
D
1
1.290
1
1
0
1
0
0
1
0
D
2
1.295
1
1
0
1
0
0
1
1
D
3
1.300
1
1
0
1
0
1
0
0
D
4
1.305
1
1
0
1
0
1
0
1
D
5
1.310
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
13
RT8165A
VID7
VID6
VID5
VID4
VID3
VID2
VID1
VID0
H1
H0
DAC Voltage
1
1
0
1
0
1
1
0
D
6
1.315
1
1
0
1
0
1
1
1
D
7
1.320
1
1
0
1
1
0
0
0
D
8
1.325
1
1
0
1
1
0
0
1
D
9
1.330
1
1
0
1
1
0
1
0
D
A
1.335
1
1
0
1
1
0
1
1
D
B
1.340
1
1
0
1
1
1
0
0
D
C
1.345
1
1
0
1
1
1
0
1
D
D
1.350
1
1
0
1
1
1
1
0
D
E
1.355
1
1
0
1
1
1
1
1
D
F
1.360
1
1
1
0
0
0
0
0
E
0
1.365
1
1
1
0
0
0
0
1
E
1
1.370
1
1
1
0
0
0
1
0
E
2
1.375
1
1
1
0
0
0
1
1
E
3
1.380
1
1
1
0
0
1
0
0
E
4
1.385
1
1
1
0
0
1
0
1
E
5
1.390
1
1
1
0
0
1
1
0
E
6
1.395
1
1
1
0
0
1
1
1
E
7
1.400
1
1
1
0
1
0
0
0
E
8
1.405
1
1
1
0
1
0
0
1
E
9
1.410
1
1
1
0
1
0
1
0
E
A
1.415
1
1
1
0
1
0
1
1
E
B
1.420
1
1
1
0
1
1
0
0
E
C
1.425
1
1
1
0
1
1
0
1
E
D
1.430
1
1
1
0
1
1
1
0
E
E
1.435
1
1
1
0
1
1
1
1
E
F
1.440
1
1
1
1
0
0
0
0
F
0
1.445
1
1
1
1
0
0
0
1
F
1
1.450
1
1
1
1
0
0
1
0
F
2
1.455
1
1
1
1
0
0
1
1
F
3
1.460
1
1
1
1
0
1
0
0
F
4
1.465
1
1
1
1
0
1
0
1
F
5
1.470
1
1
1
1
0
1
1
0
F
6
1.475
1
1
1
1
0
1
1
1
F
7
1.480
1
1
1
1
1
0
0
0
F
8
1.485
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
14
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
VID7
VID6
VID5
VID4
VID3
VID2
VID1
VID0
H1
H0
DAC Voltage
1
1
1
1
1
0
0
1
F
9
1.490
1
1
1
1
1
0
1
0
F
A
1.495
1
1
1
1
1
0
1
1
F
B
1.500
1
1
1
1
1
1
0
0
F
C
1.505
1
1
1
1
1
1
0
1
F
D
1.510
1
1
1
1
1
1
1
0
F
E
1.515
1
1
1
1
1
1
1
1
F
F
1.520
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
15
RT8165A
Absolute Maximum Ratings
(Note 1)
VCC to GND ----------------------------------------------------------------------------------------------PVCC to GND --------------------------------------------------------------------------------------------z RGNDx to GND ------------------------------------------------------------------------------------------z TONSETx to GND ---------------------------------------------------------------------------------------z Others ------------------------------------------------------------------------------------------------------z BOOTx to PHASEx -------------------------------------------------------------------------------------z PHASEx to GND
DC -----------------------------------------------------------------------------------------------------------<20ns ------------------------------------------------------------------------------------------------------z UGATEx to PHASEx
DC -----------------------------------------------------------------------------------------------------------<20ns ------------------------------------------------------------------------------------------------------z LGATEx to GND
DC -----------------------------------------------------------------------------------------------------------<20ns ------------------------------------------------------------------------------------------------------z Power Dissipation, PD @ TA = 25°C
z
z
z
z
z
z
z
WQFN−48L 6x6 ------------------------------------------------------------------------------------------Package Thermal Resistance (Note 2)
WQFN−48L 6x6, θJA ------------------------------------------------------------------------------------WQFN−48L 6x6, θJC ------------------------------------------------------------------------------------Junction Temperature -----------------------------------------------------------------------------------Lead Temperature (Soldering, 10 sec.) -------------------------------------------------------------Storage Temperature Range --------------------------------------------------------------------------ESD Susceptibility (Note 3)
HBM (Human Body Model) ----------------------------------------------------------------------------MM (Machine Model) ------------------------------------------------------------------------------------
Recommended Operating Conditions
z
z
z
z
z
−0.3V to 6.5V
−0.3V to 6.5V
−0.3V to 0.3V
−0.3V to 28V
−0.3V to (VCC + 0.3V)
−0.3V to 6.5V
−0.3V to 28V
−8V to 32V
−0.3V to (BOOTx − PHASEx)
−5V to 7.5V
−0.3V to (PVCC − 0.3V)
−2.5V to 7.5V
2.857W
35°C/W
6°C/W
150°C
260°C
−65°C to 150°C
2kV
200V
(Note 4)
Supply Voltage of Controller, VCC -------------------------------------------------------------------- 4.5V to 5.5V
Supply Voltage of Gate Driver, VPVCC ---------------------------------------------------------------- 4.5V to 5.5V
Battery Input Voltage, VIN ------------------------------------------------------------------------------ 5V to 25V
Junction Temperature Range --------------------------------------------------------------------------- −40°C to 125°C
Ambient Temperature Range --------------------------------------------------------------------------- −40°C to 85°C
Electrical Characteristics
(VCC = 5V, TA = 25°C, unless otherwise specified)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
VCC /VPVCC
VEN = 1.05V, Not Switching
4.5
5
5.5
V
VIN
Battery Input Voltage
5
--
25
V
IVCC + IPVCC
VEN = 1.05V, Not Switching
--
12
20
mA
ITONSETx
VFB =1V, V IN = 12V, RTON = 100kΩ
--
110
--
μA
Supply Input
Input Voltage Range
Supply Current
(VCC + PVCC)
Supply Current
(TONSETx)
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
16
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
Shutdown Current
(PVCC + VCC)
IVCC_SHDN
+ IPVCC_SHDN
VEN = 0V
--
--
5
μA
Shutdown Current
(TONSETx)
ITONSETx_SHDN
VEN = 0V
--
--
5
μA
TONSETx Voltage
VTONSETx
IRTON = 80μA, VFBx = 1V
0.95
1.075
1.2
0V
On-Time
tON
IRTON = 80μA, VFBx = 1V
315
350
385
ns
VFBx = 1.1V
25
--
280
μA
--
350
--
ns
--
80
--
μA
4.5
--
--
TON Setting
TONSETx Input Current
IRTON
Range
Minimum Off-Time
T OFF_MIN
Droop Enable / Disable
DRPENx Internal
IDRPENx
Current Source
Droop Enable Threshold VDRPENx
Droop Disable
Threshold
GFX VR Forced DEM
GFXPS2x Enable
Threshold
GFXPS2x Disable
Threshold
VDRPENx
EN goes high within 10μs
Detect VDRPENx, EN goes high
within 10μs
Detect VDRPENx, EN goes high
within 10μs
V
--
--
2
VGFXPS
4.3
--
--
V
VGFXPS
--
--
0.7
V
VIDSVID Setting = 1.000V~1.520V
OFSSVID Setting = 0V
−0.5
0
0.5
%VID
VIDSVID Setting = 0.800V~1.000V
OFSSVID Setting = 0V
−5
0
5
VIDSVID Setting = 0.500V~0.800V
OFSSVID Setting = 0V
−8
0
8
VIDSVID Setting = 0.250V~0.500V
OFSSVID Setting = 0V
−8
0
8
VIDSVID Setting = 1.100V
OFSSVID Setting = −0.640V~0.635V
−10
0
10
References and System Output Voltage
DAC Accuracy
(PS0/PS1)
VFBx
VINI_CORE = 0V, VINI_GFX = 0V
SETINIx Voltage
External OFSx Voltage
VSETINIx
VOFSx
0
0.3125 0.5125
VINI_CORE = 0.9V, VINI_GFX = 0.9V
0.7375 0.9375 1.1375
VINI_CORE = 1V, VINI_GFX = 1V
1.3625 1.5625 1.7625
VINI_CORE = 1.1V, VINI_GFX = 1.1V
2.6125
--
5
Offset = 100mV
68
72
--
Offset = 50mV
52
56
60
Offset = −50mV
36
40
44
Offset = −100mV
20
24
28
No Offset Voltage
0
8
12
1
--
--
Impedance of OFSx Pin ROFSx
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
mV
V
%VCC
MΩ
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
17
RT8165A
Parameter
Symbol
IBIAS Pin Voltage
VIBIAS
Dynamic VID Slew Rate
SRDVID
Test Conditions
Min
Typ
Max
Unit
R IBIAS = 53.6kΩ
2.09
2.14
2.19
V
SetVID Slow
2.5
3.125
3.75
SetVID Fast
10
12.5
15
mV/μs
Error Amplifier
DC Gain
Gain-Bandwidth Product
ADC
GBW
R L = 47kΩ
(Note5)
C LOAD = 5pF
(Note5)
70
--
80
10
---
dB
MHz
Slew Rate
SRCOMP
C LOAD = 10pF (Gain = −4, RLOAD_COMP
= 47kΩ, VCOMPx = 0.5V to 3V)
--
5
--
V/μs
Output Voltage Range
VCOMP
R L = 47kΩ
0.5
--
3.6
V
ICOMP
V COMP = 2V
--
250
--
μA
RFBx
1
--
--
MΩ
VOFS_CSA
−1
--
1
mV
Impedance of Neg. Input RISENxN
1
--
--
MΩ
Impedance of Pos. Input
1
--
--
MΩ
−50
--
100
mV
MAX Source/Sink
Current
Impedance of FBx
Current Sense Amplifier
Input Offset Voltage
RISENxP
VCSDIx
V FBx = 1.1V,
V CSDIx = V ISENxP − VISENxN
AI
V FBx = 1.1V, −30mV < V CSDIx < 50mV
--
10
--
V/V
VISEN_ACC
V DAC = 1.1V − 30mV < VISEN_IN < 50mV
−1
--
1
%
V
Current Monitor Output
= 1V, VISENxN = 0.9V,
VIMONx_ENLL FBx
Voltage (Droop Enabled)
V RIMONFBx = 10k, RIMONx = 160k
--
1.6
--
V
V CSDIx = VISENxP − VISENxN = 100mV
Current Monitor Output
VIMONx_DISLL V FBx = 1V, VRIMONFBx = 10k,
Voltage (Droop Disabled)
R IMONx = 80k
--
1.6
--
V
IMON Voltage Range
0
--
3.3
V
3.3V / 255 = 12.94mV
--
12.94
--
mV
V IMONx = 388.3mV, DIOUT [7 : 0] = 30
27
30
33
Decimal
V IMONx = 776.5mV, DIOUT [7 : 0] = 60
57
60
63
Decimal
V IMONx = 1164.7mV, DIOUT [7 : 0] = 90
87
90
93
Decimal
--
1600
--
μs
Current Sense
Differential Input Range
Current Sense DC Gain
(Loop)
V ISEN Linearity
Digital Current Monitor
VIMON
Digital IMON LSB
Digital Code of IMON
Update Period of Digital
Current Monitor
CDIMON
tIMON
Gate Driver
Upper Driver Source
RUGATEx_sr
V BOOTx − V PHASEx = 5V
V BOOTx − V UGATEx = 0.1V
--
1
--
Ω
Upper Driver Sink
RUGATEx_sk
V UGATEx = 0.1V
--
1
--
Ω
Lower Driver Source
RLGATEx_sr
PVCC = 5V, PVCC − VLGATEx = 0.1V
--
1
--
Ω
Lower Driver Sink
RLGATEx_sk
V LGATEx = 0.1V
--
0.5
--
Ω
Internal Boot Charging
Switch On-Resistance
RBOOTx
PVCC to BOOTx
--
30
--
Ω
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
18
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
Parameter
Zero Current Detection
Threshold
Protection
Under Voltage Lock-out
Threshold
Under Voltage Lock-out
Hysteresis
Over Voltage Protection
Threshold
Under Voltage Protection
Threshold
Negative Voltage
Protection Threshold
Current Sense Gain for
Over Current Protection
Symbol
Test Conditions
Min
Typ
Max
Unit
--
10
--
mV
4.04
4.24
--
V
--
100
--
mV
100
150
200
mV
−350
−300
−250
mV
−100
−50
--
mV
--
48
--
V/V
With respect to 1V, 70%
0.7
--
--
V
With respect to 1V, 30%
--
--
0.3
V
V ZCD_TH
V ZCD_TH = GND − VPHASEx
V UVLO
VCC Falling edge
ΔVUVLO
V OVP
V UVP
Respect to VOUT_MAXSVID, with
1μs filter time
V UVP = VISENxN − VREFx, 0.8V <
V REFx <1.52V, with 3μs filter time
V NVP
V NVP = VISENxN − GND
A OC
V OCSET = 2.4V
V ISENxP − VISENxN = 50mV
Logic Inputs
EN Input
Logic-High V IH
Threshold
Logic-Low V IL
Voltage
Leakage Current of EN
−1
--
1
μA
V IH
With respect to Intel Spec.
0.65
--
--
V
V IL
With respect to Intel Spec.
--
--
0.45
V
−1
--
1
μA
--
--
0.4
V
VRx_READY Low Voltage V VRx_READY IVRx_READY_ SINK = 4mA
--
--
0.4
V
VRx_READY Delay
VCLK,VDIO Input
Threshold Voltage
Leakage Current of
VCLK, VDIO
ALERT
ALERT Low Voltage
ILEAK_IN
V ALERT
IALERT_ SINK = 4mA
VR Ready
tVRx_READY
V ISENxN = V BOOT to VVRx_READY high
70
100
160
μs
V VRHOT
IVRHOT_SINK = 40mA
--
0.4
--
V
−1
--
1
μA
Thermal Throttling
VRHOT Output Voltage
High Impedance Output
ALERT, VRx_READY,
VRHOT
ILEAK_OUT
Temperature Zone
TSEN Threshold for
Tmp_Zone [7] transition
100°C
--
1.8725
--
V
TSEN Threshold for
Tmp_Zone [6] transition
97°C
--
1.8175
--
V
94°C
--
1.7625
--
V
TSEN Threshold for
Tmp_Zone [4] transition
91°C
--
1.7075
--
V
TSEN Threshold for
Tmp_Zone [3] transition
88°C
--
1.6525
--
V
TSEN Threshold for
Tmp_Zone [5] transition
V TSENx
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
19
RT8165A
Parameter
Symbol
Min
Typ
Max
Unit
85°C
--
1.5975
--
V
82°C
--
1.5425
--
V
75°C
--
1.4875
--
V
tTSEN
--
1600
--
μs
tLAT
--
--
400
μs
TSEN Threshold for
Tmp_Zone [2] transition
TSEN Threshold for
Tmp_Zone [1] transition
V TSENx
TSEN Threshold for
Tmp_Zone [0] transition
Update Period
Test Conditions
ADC
Latency
Digital Code of ICCMAX
Digital Code of ICCMAXA
Digital Code of TMPMAX
C ICCMAX1
V ICCMAX = 0.637V
29
32
35
decimal
C ICCMAX2
V ICCMAX = 1.2642V
61
64
67
decimal
C ICCMAX3
V ICCMAX = 2.5186V
125
128
131
decimal
C ICCMAXA1 V ICCMAXA = 0.1666V
5
8
11
decimal
C ICCMAXA2 V ICCMAXA = 0.3234V
13
16
19
decimal
C ICCMAXA3 V ICCMAXA = 0.637V
29
32
35
decimal
C TMPMAX1 V TMPMAX = 1.6758V
82
85
88
decimal
C TMPMAX2 V TMPMAX = 1.9698V
97
100
103
decimal
C TMPMAX3 V TMPMAX = 2.4598V
122
125
128
decimal
Note 1. Stresses beyond those listed “Absolute Maximum Ratings” may cause permanent damage to the device. These are
stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in
the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions may
affect device reliability.
Note 2. θJA is measured at TA = 25°C on a high effective thermal conductivity four-layer test board per JEDEC 51-7. θJC is
measured at the exposed pad of the package.
Note 3. Devices are ESD sensitive. Handling precaution is recommended.
Note 4. The device is not guaranteed to function outside its operating conditions.
Note 5. Guaranteed by design.
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
20
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
Typical Operating Characteristics
CORE VR Power Off from EN
CORE VR Power On from EN
V CORE
(500mV/Div)
EN
(2V/Div)
VR_READY
(2V/Div)
V CORE
(500mV/Div)
EN
(2V/Div)
VR_READY
(2V/Div)
UGATE
(20V/Div)
UGATE
(20V/Div)
Boot VID = 1V
Boot VID = 1V
Time (100μs/Div)
Time (100μs/Div)
CORE VR OCP
CORE VR OVP and NVP
V CORE
(1V/Div)
V CORE
(1V/Div)
I LOAD
(10A/Div)
LGATE
(10V/Div)
VR_READY
(1V/Div)
VR_READY
(1V/Div)
UGATE
(20V/Div)
UGATE
(20V/Div)
VID = 1.1V
VID = 1.1V
Time (100μs/Div)
Time (40μs/Div)
CORE VR Dynamic VID Up
CORE VR Dynamic VID Down
V CORE
(500mV/Div)
V CORE
(500mV/Div)
VCLK
(2V/Div)
VDIO
(2V/Div)
VCLK
(2V/Div)
VDIO
(2V/Div)
ALERT
(2V/Div)
0.7V to 1.2V, Slew Rate = Slow, ILOAD = 4A
Time (40μs/Div)
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
ALERT
(2V/Div)
1.2V to 0.7V, Slew Rate = Slow, ILOAD = 4A
Time (40μs/Div)
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
21
RT8165A
CORE VR Dynamic VID Down
CORE VR Dynamic VID Up
V CORE
(500mV/Div)
V CORE
(500mV/Div)
VCLK
(2V/Div)
VCLK
(2V/Div)
VDIO
(2V/Div)
ALERT
(2V/Div)
VDIO
(2V/Div)
ALERT
(2V/Div)
0.7V to 1.2V, Slew Rate = Fast, ILOAD = 4A
1.2V to 0.7V, Slew Rate = Fast, ILOAD = 4A
Time (10μs/Div)
Time (10μs/Div)
CORE VR Load Transient
CORE VR Load Transient
V CORE
(20mV/Div)
V CORE
(20mV/Div)
8
I LOAD
(A/Div) 1
8
I LOAD
(A/Div) 1
VID = 1.1V, ILOAD = 1A to 8A, Slew Time = 150ns
VID = 1.1V, ILOAD = 8A to 1A, Slew Time = 150ns
Time (100μs/Div)
Time (100μs/Div)
CORE VR Mode Transition
CORE VR Mode Transition
V CORE
(20mV/Div)
V CORE
(20mV/Div)
VCLK
(1V/Div)
LGATE
(10V/Div)
VCLK
(1V/Div)
LGATE
(10V/Div)
UGATE
(20V/Div)
UGATE
(20V/Div)
VID = 1.1V, PS0 to PS2, ILOAD = 0.2A
VID = 1.1V, PS2 to PS0, ILOAD = 0.2A
Time (100μs/Div)
Time (100μs/Div)
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
22
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
CORE VR Thermal Monitoring
CORE VR VREF vs. Temperature
1.006
1.9
1.004
TSEN
(V/Div)
1.002
VREF (V)
1.7
1.000
0.998
0.996
0.994
VRHOT
(500mV/Div)
0.992
TSEN Sweep from 1.7V to 1.9V
0.990
Time (10ms/Div)
-50
-25
0
25
50
75
100
125
Temperature (°C)
GFX VR Power On from EN
GFX VR Power Off from EN
VGFX
(500mV/Div)
EN
(2V/Div)
VRA_READY
(2V/Div)
VGFX
(500mV/Div)
EN
(2V/Div)
VRA_READY
(2V/Div)
UGATEA
(20V/Div)
UGATEA
(20V/Div)
Boot VID = 1V
Boot VID = 1V
Time (100μs/Div)
Time (100μs/Div)
GFX VR OCP
GFX VR OVP and NVP
VGFX
(1V/Div)
VGFX
(1V/Div)
I LOAD
(5A/Div)
VRA_READY
(1V/Div)
LGATEA
(10V/Div)
VRA_READY
(1V/Div)
UGATEA
(20V/Div)
UGATEA
(20V/Div)
VID = 1.1V
Time (100μs/Div)
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
Time (40μs/Div)
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
23
RT8165A
GFX VR Dynamic VID
GFX VR Dynamic VID
VGFX
(500mV/Div)
VGFX
(500mV/Div)
VCLK
(2V/Div)
VDIO
(2V/Div)
ALERT
(2V/Div)
VCLK
(2V/Div)
VDIO
(2V/Div)
ALERT
(2V/Div)
0.7V to 1.2V, Slew Rate = Slow, ILOAD = 1.25A
1.2V to 0.7V, Slew Rate = Slow, ILOAD = 1.25A
Time (40μs/Div)
Time (40μs/Div)
GFX VR Dynamic VID
GFX VR Dynamic VID
VGFX
(500mV/Div)
VGFX
(500mV/Div)
VCLK
(2V/Div)
VDIO
(2V/Div)
VCLK
(2V/Div)
VDIO
(2V/Div)
ALERT
(2V/Div)
ALERT
(2V/Div)
0.7V to 1.2V, Slew Rate = Fast, ILOAD = 1.25A
1.2V to 0.7V, Slew Rate = Fast, ILOAD = 1.25A
Time (10μs/Div)
Time (10μs/Div)
GFX VR Load Transient
GFX VR Load Transient
VGFX
(20mV/Div)
VGFX
(20mV/Div)
I LOAD 4
(A/Div) 1
I LOAD 4
(A/Div) 1
VID = 1.1V, ILOAD = 1A to 4A, Slew Time = 150ns
Time (100μs/Div)
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
24
VID = 1.1V, ILOAD = 4A to 1A, Slew Time = 150ns
Time (100μs/Div)
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
GFX VR Mode Transition
GFX VR Mode Transition
VGFX
(20mV/Div)
VGFX
(20mV/Div)
VCLK
(1V/Div)
VCLK
(1V/Div)
LGATEA
(10V/Div)
LGATEA
(10V/Div)
UGATEA
(20V/Div)
UGATEA
(20V/Div)
VID = 1.1V, PS0 to PS2, ILOAD = 0.1A
VID = 1.1V, PS2 to PS0, ILOAD = 0.1A
Time (100μs/Div)
Time (100μs/Div)
GFX VR VREF vs. Temperature
GFX VR Thermal Monitoring
1.006
1.004
1.9
TSENA
(V/Div)
1.002
1.000
VREF (V)
1.7
0.998
0.996
0.994
0.992
VRHOT
(500mV/Div)
0.990
TSENA Sweep from 1.7V to 1.9V
Time (10ms/Div)
0.988
-50
-25
0
25
50
75
100
125
Temperature (°C)
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
25
RT8165A
Application Information
The RT8165A is a VR12/IMVP7 compliant, dual singlephase synchronous Buck PWM controller for the CPU
CORE VR and GFX VR. The gate drivers are embedded
to facilitate PCB design and reduce the total BOM cost. A
serial VID (SVID) interface is built-in in the RT8165A to
communicate with Intel VR12/IMVP7 compliant CPU.
The RT8165A adopts G-NAVPTM (Green Native AVP), which
is Richtek's proprietary topology derived from finite DC
gain compensator, making it an easy setting PWM
controller to meet AVP requirements. The load line can
be easily programmed by setting the DC gain of the error
amplifier. The RT8165A has fast transient response due to
the G-NAVPTM commanding variable switching frequency.
G-NAVPTM topology also represents a high efficiency
system with green power concept. With G-NAVP TM
topology, the RT8165A becomes a green power controller
with high efficiency under heavy load, light load, and very
light load conditions. The RT8165A supports mode
transition function between CCM and DEM. These different
operating states allow the overall power system to have
low power loss. By utilizing the G-NAVPTM topology, the
operating frequency of RT8165A varies with output voltage,
load and VIN to further enhance the efficiency even in CCM.
The built-in high accuracy DAC converts the SVID code
ranging from 0.25V to 1.52V with 5mV per step. The
differential remote output voltage sense and high accuracy
DAC allow the system to have high output voltage accuracy.
The RT8165A supports VR12/IMVP7 compatible power
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
26
management states and VID on-the-fly function. The power
management states include DEM in PS2/PS3 and ForcedCCM in PS1/PS0. The VID on-the-fly function has three
different slew rates : Fast, Slow and Decay. The RT8165A
integrates a high accuracy ADC for platform setting
functions, such as no-load offset and over current level.
The controller supports both DCR and sense-resistor
current sensing. The RT8165A provides VR ready output
signals of both CORE VR and GFX VR. It also features
complete fault protection functions including over voltage,
under voltage, negative voltage, over current and under
voltage lockout. The RT8165A is available in a WQFN48L 6x6 small foot print package.
Design Tool
To help users reduce efforts and errors caused by manual
calculations, a user-friendly design tool is now available
on request. This design tool calculates all necessary
design parameters by entering user's requirements.
Please contact Richtek's representatives for details.
Serial VID (SVID) Interface
SVID is a three-wire serial synchronous interface defined
by Intel. The three wire bus includes VDIO, VCLK and
ALERT signals. The master (Intel's VR12/IMVP7 CPU)
initiates and terminates SVID transactions and drives the
VDIO, VCLK, and ALERT during a transaction. The slave
(RT8165A) receives the SVID transactions and acts
accordingly.
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
Standard Serial VID Command
Master Payload
Slave Payload
Contents
Contents
Code
Commands
00h
not supported
N/A
N/A
01h
SetVID_Fast
VID code
N/A
02h
SetVID_Slow
VID code
N/A
03h
SetVID_Decay
VID code
N/A
04h
SetPS
Byte indicating
power states
N/A
Set power state
05h
SetRegADR
Pointer of registers
in data table
N/A
Set the pointer of the data register
06h
SetReg DAT
New data register
content
N/A
Write the contents to the data register
07h
GetReg
Pointer of registers
in data table
Specified
Register
Contents
Slave returns the contents of the specified
register as the payload
08h
1Fh
not supported
N/A
N/A
N/A
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
Description
N/A
Set new target VID code, VR jumps to new VID
target with controlled default “fast” slew rate
12.5mV/μs.
Set new target VID code, VR jumps to new VID
target with controlled default “slow” slew rate
3.125mV/μs.
Set new target VID code, VR jumps to new VID
target, but does not control the slew rate. The
output voltage decays at a rate proportional to
the load current
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
27
RT8165A
Data and Configuration Register
Index
00h
01h
02h
05h
Register Name
Vendor ID
Product ID
Product Revision
Protocol ID
06h
VR_Capability
10h
Status_1
11h
Status-2
Temperature
Zone
12h
15h
Output_Current
1Ch
Status_2_lastread
21h
ICC_Max
22h
Temp_Max
24h
SR-Fast
25h
SR-Slow
30h
VOUT_Max
31h
Description
Vendor ID, default 1Eh.
Product ID.
Product Revision.
SVID Protocol ID.
Bit mapped register, identifies the SVID VR capabilities
and which of the optional telemetry register are
supported.
Data register containing the status of VR.
Access
RO, Vendor
RO, Vendor
RO, Vendor
RO, Vendor
Default
1Eh
65h
01h
01h
RO, Vendor
81h
R-M, W-PWM
00h
Data register containing the status of transmission.
Data register showing temperature zone that have been
entered.
Data register showing direct ADC conversion of averaged
output current.
R-M, W-PWM
00h
R-M, W-PWM
00h
R-M, W-PWM
00h
The register contains a copy of the status_2.
R-M, W-PWM
00h
RO, Platform
--
RO, Platform
--
RO
0Ah
RO
02h
Data register containing the maximum ICC of platform
supports.
Binary format in Amp, IE 64h = 100A.
Data register containing the temperature max the platform
supports.
Binary format in °C, IE 64h = 100°C
Only for CORE VR
Data register containing the capability of fast slew rate the
platform can sustains. Binary format in mV/μs, IE 0Ah =
10mV/μs.
RW, Master
FBh
VID Setting
Data register containing the capability of slow slew rate.
Binary format in mV/μs IE 02h = 2.5mV/μs.
The register is programmed by the master and sets the
maximum VID.
Data register containing currently programmed VID.
RW, Master
00h
32h
Power State
Register containing the current programmed power state.
RW, Master
00h
33h
Offset
Set offset in VID steps.
RW, Master
00h
34h
Multi VR Config
Bit mapped data register which configures multiple VRs
behavior on the same bus.
RW, Master
00h
35h
Pointer
Scratch pad register for temporary storage of the
SetRegADR pointer register.
RW, Master
30h
Notes :
RO = Read Only
RW = Read/Write
R-M = Read by Master
W-PWM = Write by PWM only
Vendor = hard coded by VR vendor
Platform = programmed by platform
Master = programmed by the master
PWM = programmed by the VR control IC
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
28
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
Power Ready Detection and Power On Reset (POR)
ICCMAX, ICCMAXA and TMPMAX
During start-up, the RT8165A detects the voltage on the
voltage input pins : VCC and EN. When VCC > VUVLO,
the RT8165A will recognize the power state of system to
be ready (POR = high) and wait for enable command at
EN pin. After POR = high and EN > VENTH, the RT8165A
will enter start-up sequence for both CORE VR and GFX
VR. If the voltage on any voltage pin drops below POR
threshold (POR = low), the RT8165A will enter power down
sequence and all the functions will be disabled. SVID will
be invalid within 300μs after chip becomes enabled. All
the protection latches (OVP, OCP, UVP, OTP) will be
cleared only after POR = low. EN = low will not clear
these latches.
The RT8165A provides ICCMAX, ICCMAXA and TMPMAX
pins for platform users to set the maximum level of output
current or VR temperature: ICCMAX for CORE VR
maximum current, ICCMAXA for GFX VR maximum
current, and TMPMAX for CORE VR maximum
temperature.
VCC
+
VUVLO
EN
POR
-
Chip EN
+
VENTH
-
Figure 3. Power Ready Detection and Power On Reset
(POR)
Precise Reference Current Generation
The RT8165A includes extensive analog circuits inside
the controller. These analog circuits need very precise
reference voltage/current to drive these analog devices.
The RT8165A will auto-generate a 2.14V voltage source
at IBIAS pin, and a 53.6kΩ resistor is required to be
connected between IBIAS and analog ground. Through
this connection, the RT8165A generates a 40μA current
from IBIAS pin to analog ground and this 40μA current will
be mirrored inside the RT8165A for internal use. Other
types of connection or other values of resistance applied
at the IBIAS pin may cause failure of the RT8165A's analog
circuits. Thus a 53.6kΩ resistor is the only recommended
component to be connected to the IBIAS pin. The
resistance accuracy of this resistor is recommended to
be at least 1%.
Current
Mirror
2.14V
+
-
+
-
IBIAS
53.6k
Figure 4. IBIAS Setting
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
To set ICCMAX, ICCMAXA and TMPMAX, platform
designers should use resistive voltage dividers on these
three pins. The current of the divider should be several
milli-Amps to avoid noise effect. The three items share
the same algorithms : the ADC divides 5V into 255 levels.
Therefore, LSB = 5/255 = 19.6mV, which means 19.6mV
applied to ICCMAX pin equals to 1A setting. For example,
if a platform designer wants to set TMPMAX to 120°C, the
voltage applied to TMPMAX should be 120 x 19.6mV =
2.352V. The ADC circuit inside these three pins will
decode the voltage applied and store the maximum current/
temperature setting into ICC_MAX and Temp_Max
registers. The ADC monitors and decodes the voltage at
these three pins only after EN = high. If EN = low, the
RT8165A will not take any action even when the VR output
current or temperature exceeds its maximum setting at
these ADC pins. The maximum level settings at these
ADC pins are different from over current protection or over
temperature protection. That means, these maximum level
setting pins are only for platform users to define their
system operating conditions and these messages will only
be utilized by the CPU.
V CC
ICCMAX
A/D
Converter
ICCMAXA
TMPMAX
Figure 5. ADC Pins Setting
VINI_CORE and VINI_GFX Setting
The initial start up voltage (VINI_CORE, VINI_GFX) of the
RT8165A can be set by platform users through SETINI
and SETINIA pins. Voltage divider circuit is recommended
to be applied to SETINI and SETINIA pins. The VINI_CORE/
VINI_GFX relate to SETINI/SETINIA pin voltage setting as
shown in Figure 6. Recommended voltage setting at SETINI
and SETINIA pins are also shown in Figure 6.
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
29
RT8165A
VCC (5V)
VINI_CORE = 1.1V
VINI_GFX = 1.1V
VINI_CORE
V INI_GFX
Recommended
SETINI/SETINIA Pin Voltage
1.1V
5 x VCC≒3.125V or VCC
8
3 x VCC≒1.875V
8
3 x VCC≒0.9375V
16
1/2 VCC
VINI_CORE = 1V
VINI_GFX = 1V
VINI_CORE = 0.9V
VINI_GFX = 0.9V
VINI_CORE = 0V
VINI_GFX = 0V
1V
0.9V
1/4 VCC
1/8 VCC
0V
1 x VCC≒0.3125V or GND
16
GND
Figure 6. SETINI and SETINIA Pin Voltage Setting
Start Up Sequence
Power Down Sequence
The RT8165A utilizes internal soft-start sequence which
strictly follows Intel VR12/IMVP7 start up sequence
specifications. After POR = high and EN = high, a 300μs
delay is needed for the controller to determine whether all
the power inputs are ready for entering start up sequence.
If pin voltage of SETINI/SETINIA is zero, the output voltage
of CORE/GFX VR is programmed to stay at 0V. If pin
voltage of SETINI/SETINIA is not zero, VR output voltage
will ramp up to initial boot voltage (VINI_CORE, VINI_GFX) after
both POR = high and EN = high. After the output voltage
of CORE/GFX VR reaches target initial boot voltage, the
controller will keep the output voltage at the initial boot
voltage and wait for the next SVID commands. After the
RT8165A receives valid VID code (typically SetVID_Slow
command), the output voltage will ramp up/down to the
target voltage with specified slew rate. After the output
voltage reaches the target voltage, the RT8165A will send
out VR_READY signal to indicate the power state of the
RT8165A is ready. The VR_READY circuit is an opendrain structure so a pull-up resistor is recommended for
connecting to a voltage source.
Similar to the start up sequence, the RT8165A also utilizes
a soft shutdown mechanism during turn-off. After POR =
low, the internal reference voltage (positive terminal of
compensation EA) starts ramping down with 3.125mV/μs
slew rate, and output voltage will follow the reference
voltage to 0V. After output voltage drops below 0.2V, the
RT8165A shuts down and all functions are disabled. The
VR_READY will be pulled down immediately after POR =
low.
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
30
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
VCC
POR
EN
EN Chip
(Internal Signal)
SVID
Valid
XX
xx
300µs
0.2V
VCORE
CORE VR
Operation Mode
Off
VGFX
GFX VR
Operation Mode
CCM
SVID defined
Off
CCM
0.2V
Off
CCM
SVID defined
Off
CCM
100µs
VR_READY
VRA_READY
100µs
Figure 7 (a). Power sequence for RT8165A (VINI_CORE = VINI_GFX = 0V)
VCC
POR
EN
EN Chip
(Internal Signal)
SVID
300µs
xx
Valid
XX
250µs
VINI_CORE
0.2V
VCORE
CORE VR
Operation Mode
Off
CCM
SVID defined
Off
CCM
100µs
VR_READY
50µs
VINI_GFX
VGFX
GFX VR
Operation Mode
0.2V
Off
CCM
SVID defined
CCM
Off
100µs
VRA_READY
Figure 7 (b). Power sequence for RT8165A (VINI_CORE ≠ 0, VINI_GFX ≠ 0V)
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
31
RT8165A
Disable GFX VR : Before EN = High
GFX VR enable or disable is determined by the internal
circuitry that monitors the ISENAN voltage during start
up. Before EN = high, GFX VR detects whether the voltage
of ISENAN is higher than “VCC − 1V” to disable GFX
VR. The unused driver pins can be connected to GND or
left floating.
GFX VR Forced-DEM Function Enable : After
VRA_Ready = High
Similar to the valley current mode control with finite
compensator gain, the high side MOSFET on-time is
determined by the CCRCOT PWM generator. When load
current increases, VCS increases, the steady state COMP
voltage also increases which makes the output voltage
decrease, thus achieving AVP.
Droop Function Enable
The GFX VR's forced-DEM function can be enabled or
disabled with GFXPS2 pin. The RT8165A detects the
voltage of GFXPS2 for forced-DEM function. If the voltage
at GFXPS2 pin is higher than 4.3V, the GFX VR operates
in forced-DEM. If this voltage is lower than 0.7V, the GFX
VR follows SVID power state command.
The CORE/GFX VR's droop function can be enabled or
disabled with DRPEN/DRPENA pin. After EN = high within
10μs, the RT8165A will source 80μA current from DRPEN/
DRPENA pin to the external resistor to determine the
voltage level. If the voltage at DRPEN/DRPENA pin is lower
than 3.5V, then the VR will operate in droop-disabled mode.
If the voltage is higher than 4V, then the VR will operate in
droop-enabled mode.
Loop Control
Droop Setting (with Temperature Compensation)
Both CORE and GFX VR adopt Richtek's proprietary GNAVPTM topology. G-NAVPTM is based on the finite-gain
valley current mode with CCRCOT (Constant Current
Ripple Constant On Time) topology. The output voltage,
VCORE or VGFX, will decrease with increasing output load
current. The control loop consists of PWM modulator with
power stage, current sense amplifier and error amplifier
as shown in Figure 8.
It's very easy to achieve the Active Voltage Positioning
(AVP) by properly setting the error amplifier gain due to
the native droop characteristics. The target is to have
VOUT = VREFx − ILOAD x RDROOP
(1)
Then solving the switching condition VCOMPx = VCSx in
Figure 8 yields the desired error amplifier gain as
A V = R2 =
R1
AI × RSENSE
RDROOP
(2)
VIN
High Side
MOSFET
UGATEx
GFX/CORE VR
CCRCOT
PWM Generator
Driver
Logic
Control
L
PHASEx
VOUT
(VCORE/VGFX)
RC
LGATEx
Low Side
MOSFET RX
CX
C
where AI is the internal current sense amplifier gain and
RSENSE is the current sense resistance. If no external sense
resistor is present, the DCR of the inductor will act as
RSENSE. RDROOP is the resistive slope value of the converter
output and is the desired static output impedance.
-
+
CMP
V OUT
VCSx
+
Ai
-
A V2 > A V1
ISENxP
ISENxN
CByp
C2
C1
COMPx
R2
R1
CORE/GFX VR
VCC_SENSE
A V2
FBx
+
-
EA
+
RGNDx
A V1
CORE/GFX VR
VSS_SENSE
0
Load Current
VREFx
Figure 9. Error Amplifier Gain (AV) Influence on VOUT
Figure 8. Simplified Schematic for Droop and Remote
Sense in CCM
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
32
Accuracy
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
Since the DCR of inductor is temperature dependent, it
affects the output accuracy in high temperature conditions.
Temperature compensation is recommended for the
lossless inductor DCR current sense method. Figure 10
shows a simple but effective way of compensating the
temperature variations of the sense resistor using an NTC
thermistor placed in the feedback path.
C2
COMPx
RGNDx
R1b
R1a
VCC_SENSE
VSS_SENSE
Usually, R1a is set to equal RNTC (25°C), while R1b is
selected to linearize the NTC's temperature characteristic.
For a given NTC, the design would be to obtain R1b and
R2 and then C1 and C2. According to (2), to compensate
the temperature variations of the sense resistor, the error
amplifier gain (AV) should have the same temperature
coefficient with RSENSE. Hence
A V, HOT
RSENSE, HOT
=
A V, COLD RSENSE, COLD
(3)
R2
(4)
R1a / /RNTC, T + R1b
The standard formula for the resistance of NTC thermistor
as a function of temperature is given by :
) ( )}
1
β⎡
− 1 ⎤
298 ⎦⎥
⎣⎢ T+273
(5)
where RNTC, 25 is the thermistor's nominal resistance at
room temperature, β (beta) is the thermistor's material
constant in Kelvins, and T is the thermistor's actual
temperature in Celsius.
The DCR value at different temperatures can be calculated
using the equation below :
DCRT = DCR25 x [1+0.00393 x (T-25)]
(6)
where 0.00393 is the temperature coefficient of copper.
For a given NTC thermistor, solving (4) at room temperature
(25°C) yields
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
where AV, 25°C is the error amplifier gain at room temperature
obtained from (2). R1b can be obtained by substituting
(7) to (3),
R1b =
RSENSE, HOT
× (R1a // RNTC, HOT ) − (R1a // RNTC, COLD )
RSENSE, COLD
(8)
Optimized compensation of the CORE VR allows for best
possible load step response of the regulator's output. A
type-I compensator with one pole and one zero is adequate
for a proper compensation. Figure 10 shows the
compensation circuit. It was previously mentioned that to
determine the resistive feedback components of error
amplifier gain, C1 and C2 must be calculated for the
compensation. The target is to achieve constant resistive
output impedance over the widest possible frequency
range.
The pole frequency of the compensator must be set to
compensate the output capacitor ESR zero :
fP =
From (2), we can have Av at any temperature (T) as
RNTC, T = RNTC, 25
(7)
Loop Compensation
NTC
Figure 10. Loop Setting with Temperature Compensation
{(
e
x (R1b + R1a // RNTC, 25)
RSENSE, HOT ⎞
⎛
⎜1 − R
⎟
SENSE, COLD ⎠
⎝
VREFx
A V, T =
25
C1
FBx
+
EA
+
R2
R2 = AV,
1
2 × π × C × RC
(9)
where C is the capacitance of the output capacitor and RC
is the ESR of the output capacitor. C2 can be calculated
as follows :
C × RC
(10)
C2 =
R2
The zero of compensator has to be placed at half of the
switching frequency to filter the switching-related noise.
Such that,
1
C1 =
(11)
R1b
+
R1a
//
R
(
NTC, 25°C ) × π × fSW
TON Setting
High frequency operation optimizes the application by
trading off efficiency due to higher switching losses with
smaller component size. This may be acceptable in ultraportable devices where the load currents are lower and
the controller is powered from a lower voltage supply. Low
frequency operation offers the best overall efficiency at
the expense of component size and board space. Figure
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
33
RT8165A
11 shows the on-time setting circuit. Connect a resistor
(RTONSETx) between VIN and TONSETx to set the on-time
of UGATEx :
tONx (VREFx < 1.2V) =
-12
28 × 10 × RTONSETx
VIN − VREFx
-12
× RTONSETx × VREFx
VIN − VREFx
(13)
On-time translates roughly to switching frequencies. The
on-times guaranteed in the Electrical Characteristics are
influenced by switching delays in external high side
MOSFET. Also, the dead-time effect increases the effective
on-time, reducing the switching frequency. It occurs only
in CCM during dynamic output voltage transitions when
the inductor current reverses at light or negative load
currents. With reversed inductor current, PHASEx goes
high earlier than normal, extending the on-time by a period
equal to the high side MOSFET rising dead time.
For better efficiency of the given load range, the maximum
switching frequency is suggested to be :
fS(MAX) (kHz) =
R1
VIN
C1
VREFx
On-Time
When VREFx is larger than 1.2V, the equivalent switching
frequency may be over the maximum design range, making
it unacceptable. Therefore, the VR implements a pseudoconstant-frequency technology to avoid this disadvantage
of CCRCOT topology. When VREFx is larger than 1.2V,
the on-time equation will be modified to :
tONx (VREFx ≥ 1.2V)
23.33 × 10
TONSETx RTONSETx
(12)
where tONx is the UGATEx turn on period, VIN is the input
voltage of converter, and VREFx is the internal reference
voltage.
=
GFX/CORE
VR CCRCOT
PWM
Generator
1
×
tON − tHS−Delay
Figure 11. On-Time Setting with RC Filter
Differential Remote Sense Setting
The CORE/GFX VR includes differential, remote-sense
inputs to eliminate the effects of voltage drops along the
PC board traces, CPU internal power routes and socket
contacts. The CPU contains on-die sense pins CORE/
GFX VCC_SENSE and VSS_SENSE. Connect RGNDx to CORE/
GFX VSS_SENSE. Connect FBx to CORE/GFX VCC_SENSE
with a resistor to build the negative input path of the error
amplifier. The precision voltage reference VREFx is referred
to RGND for accurate remote sensing.
Current Sense Setting
The current sense topology of the CORE/GFX VR is
continuous inductor current sensing. Therefore, the
controller can be less noise sensitive. Low offset amplifiers
are used for loop control and over current detection. The
internal current sense amplifier gain (AI) is fixed to be 10.
The ISENxP and ISENxN denote the positive and negative
input of the current sense amplifier.
Users can either use a current sense resistor or the
inductor's DCR for current sensing. Using inductor's DCR
allows higher efficiency as shown in Figure 12. To let
L = R ×C
(15)
X
X
DCR
then the transient performance will be optimum. For
example, choose L = 0.36μH with 1mΩ DCR and
VREFx(MAX) + ILOAD(MAX) × ⎡⎣RON _ LS−FET + DCR − RDROOP ⎤⎦
CX = 100nF, to yields for RX :
VIN(MAX) + ILOAD(MAX) × ⎡⎣RON _ LS−FET − RON _ HS−FET ⎤⎦
0.36μH
RX =
= 3.6kΩ
(16)
(14)
1mΩ × 100nF
where fS(MAX) is the maximum switching frequency, tHSDelay is the turn on delay of high side MOSFET, VREFx(MAX)
is the maximum application DAC voltage of application,
V IN(MAX) is the maximum application input voltage,
ILOAD(MAX) is the maximum load of application, RON_LS-FET
is the low side MOSFET RDS(ON), RON_HS-FET is the high
side MOSFET RDS(ON), DCRL is the inductor DCR, and
RDROOP is the load line setting.
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
34
VOUT
(VCORE/VGFX)
PHASEx
L
RX
VCSx
AI
+
-
DCR
CX
ISENxP
ISENxN
CByp
Figure 12. Lossless Inductor Sensing
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
Considering the inductance tolerance, the resistor RX has
to be tuned on board by examining the transient voltage.
If the output voltage transient has an initial dip below the
minimum load line requirement with a slow recovery, RX
is too small. Vice versa, if the resistance is too large the
output voltage transient will only have a small initial dip
and the recovery will be too fast, causing a ring-back.
Using current-sense resistor in series with the inductor
can have better accuracy, but the efficiency is a trade-off.
Considering the equivalent inductance (LESL) of the current
sense resistor, a RC filter is recommended. The RC filter
calculation method is similar to the above-mentioned
inductor DCR sensing method.
No-Load Offset
The RT8165A provides a no-load offset function which has
four-level offsets of output voltage for the CORE/GFX VR.
The no-load offset function is implemented through the
OFSx pin. A voltage divider circuit is recommended to be
applied to OFSx pins. The output offset voltage relation to
the OFSx pin voltage setting is shown in Figure 13.
Recommended voltage setting at OFS and OFSA pins
are also shown in Figure 13.
After receiving SetPS command, the CORE/GFX VR will
immediately change to the new operation state. When
VR receives SetPS command of PS2 operation mode,
the VR operates as a DEM controller.
If VR receives dynamic VID change command (SetVID),
VR will automatically enter PS0 operation mode. After
output voltage reaches target voltage, VR will stay at PS0
state and ignore former SetPS command. Only by
re-sending SetPS command after SetVID command will
VR be forced into PS2 operation state again.
Thermal Monitoring and Temperature Reporting
CORE/GFX VR provides thermal monitoring function via
sensing TSEN pin voltage. Through the voltage divider
resistors R1, R2, R3 and RNTC, the voltage of TSEN will
be proportional to VR temperature. When VR temperature
rises, the TSENx voltage also rises. The ADC circuit of
VR monitors the voltage variation at TSENx pin from 1.47V
to 1.89V with 55mV resolution, and this voltage is decoded
into digital format and stored into the Temperature Zone
register.
VCC
R1
VCC (5V)
Offset Voltage =100mV
0.64 VCC
Offset Voltage = 50mV
0.48 VCC
Offset Voltage = -50mV
0.32 VCC
Offset Voltage = -100mV
0.16 VCC
RNTC
Offset
Voltage
100mV
Recommended
OFS/OFSA Pin Voltage
0.8 x VCC≒4V or VCC
50mV
0.56 x VCC≒2.8V
−50mV
0.4 x VCC≒2V
−100mV
0.24 x VCC≒1.2V
Figure 14. Thermal Monitoring Circuit
0mV
GND
To meet Intel's VR12/IMVP7 specification, platform users
have to set the TSEN voltage to meet the temperature
variation of VR from 75% to 100% VR max temperature.
For example, if the VR max temperature is 100°C, platform
Offset Voltage = 0mV
GND
Figure 13. OFS and OFSA Pins Voltage Setting
Operation Mode Transition
The RT8165A supports operation mode transition function
in CORE/GFX VR for the SetPS command of Intel's VR12/
IMVP7 CPU. The default operation mode of the RT8165A's
CORE/GFX VR is PS0, which is CCM operation. The other
operation mode is PS2 (DEM operation).
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
R2
TSENx
R3
users have to set the TSEN voltage to be 1.4875V when
VR temperature reaches 75°C and 1.8725V when VR
temperature reaches 100°C. Detailed voltage setting
versus temperature variation is shown in Table 2.
Thermometer code is implemented in the Temperature
Zone register.
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
35
RT8165A
1.855 ≤ VTSEN
1.800 ≤ V TSEN ≤ 1.835
1.745 ≤ V TSEN ≤ 1.780
Temperature_Zone
Register Content
1111_1111
0111_1111
0011_1111
1.690 ≤ V TSEN ≤ 1.725
1.635 ≤ V TSEN ≤ 1.670
1.580 ≤ V TSEN ≤ 1.615
1.525 ≤ V TSEN ≤ 1.560
0001_1111
0000_1111
0000_0111
0000_0011
1.470 ≤ V TSEN ≤ 1.505
V TSEN < 1.470
0000_0001
0000_0000
TSEN Pin Voltage
The RT8165A supports two temperature reporting,
VRHOT(hardware reporting) and ALERT(software
reporting), to fulfill VR12/IMVP7 specification. VRHOT is
an open-drain structure which sends out active-low VRHOT
signals. When TSEN voltage rises above 1.855V (100%
of VR temperature), the VRHOT signal will be set to low.
When TSEN voltage drops below 1.8V (97% of VR
temperature), the VRHOT signal will be reset to high. When
TSEN voltage rises above 1.8V (97% of VR temperature),
The RT8165A will update the bit1 data from 0 to 1 in the
Status_1 register and assert ALERT. When TSEN voltage
drops below 1.745V (94% of VR temperature), VR will
update the bit1 data from 1 to 0 in the Status_1 register
and assert ALERT.
The temperature reporting function for the GFX VR can be
disabled by pulling TSENA pin to VCC in case the
temperature reporting function for the GFX VR is not used
or the GFX VR is disabled. When the GFX VR's
temperature reporting function is disabled, the RT8165A
will reject the SVID command of getting the
Temperature_Zone register content of the GFX VR.
However, note that the temperature reporting function for
the CORE VR is always active. CORE VR's temperature
reporting function can not be disabled by pulling TSEN
pin to VCC.
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
36
Current Monitoring and Current Reporting
The CORE/GFX VR provides current monitoring function
via sensing the voltage difference of IMONFBx pin and
output voltage. Figure 15 shows the current monitoring
setting principle. The equivalent output current will be
sensed from IMONFBx pin and mirrored to IMONx pin.
The resistor connected to IMONx pin determines voltage
gain of the IMON output.
Current Monitor
VREFx + 2 (VISENxP - VISENxN)
0LL EN
IMIrror
VCC_SENSE
+
Table 2. Temperature Zone Register
Comparator Trip Points
SVID Temperatures Scaled to maximum =
VRHOT Thermal 100%
Alert Voltage Represents Assert bit
Minimum Level
b7
b6
b5
b4
b3
b2
b1
b0
100%
97% 94% 91% 88% 85% 82% 75%
1.745 1.69 1.635 1.58 1.52 1.47
1.855V 1.8V
V
V
V
V
5V
V
VREFx
RIMONFB
IMONFBx
IMONx
VIMON
RIMON
C1
Figure 15. Current Monitor Setting Principle
The voltage of IMONFBx is different when VR operates in
droop enable mode and droop disable mode :
Droop enable mode : VIMONFBx = VREFx
(17)
Droop disable mode :
VIMONFBx = VREFx + 2 (VISENxP − VISENxN)
(18)
The current monitor indicator VIMON equation is shown as:
VIMON =
(IIMONFBx − VCC _ SENSE ) × RIMON
RIMONFB
(19)
where VIMONFBx is the pin voltage of IMONFBx, VCC_SENSE
is the output voltage of CORE/GFX VR, and RIMON and
RIMONFB are the current monitor current setting resistors.
The maximum voltage of current monitoring will be limited
at 3.3V. Platform designers have to design the RIMON to
meet the maximum voltage of IMON at full load.
When VR operates in droop enable mode, find RIMON and
RIMONFB based on :
VIMON(MAX)
RIMON
=
RIMONFB I(MAX) × RDROOP
(20)
where VIMON(MAX) is the maximum voltage at full load,
RDROOP is the load line setting of VR, and IMAX is the full
load current of VR.
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
When VR operate in droop disable mode, RIMON and
RIMONFB can be obtained according to equation below :
VIMON(MAX)
RIMON
=
(21)
RIMONFB I(MAX) × RSENSE × 2
where VIMON(MAX) is the maximum voltage at full load,
RSENSE is the equivalent resistance of current sense circuit,
and IMAX is the full load current of VR.
The ADC circuit of the CORE/GFX VR monitors the voltage
variation at the IMON pin from 0V to 3.3V, and this voltage
is decoded into digital format and stored into the
Output_Current register. The ADC divides 3.3V into 255
levels, so LSB = 3.3V/255 = 12.941mV. Platform
designers should design VIMONx to be 3.3V at ICCMAX.
For example, when load current = 0.5 x ICCMAX, VIMON =
1.65V and Output_Current register = 7Fh.
The current limit is triggered when inductor current
exceeds the current limit threshold ILIMIT, defined by
VOCSET. The driver will be forced to turn off UGATE until
the over current condition is cleared. If the over current
condition remains valid for 15 PWM cycles, VR will trigger
OCP latch. Latched OCP forces both UGATE and LGATE
to go low. When OCP is triggered in one of VRs, the
other VR will enter into soft shutdown sequence. The OCP
latch mechanism will be masked when VRx_READY =
low, which means that only the current limit will be active
when VOUT is ramping up to initial voltage (or VREFx).
If inductor DCR is used as the current sense component,
then temperature compensation is recommended for
protection under all conditions. Figure 17 shows a typical
OCP setting with temperature compensation.
VCC
The IMON pin is the output of internal operational amplifier
and sends out IMON signal. When IMON voltage rises
above 3.3V (100% of VR output current), the VR will update
the bit2 data from 0 to 1 in the Status_1 register. The 1 in
bit2 of Status_1 register will be cleared to 0 only after the
master (usually Intel's VR12/IMVP7 CPU) executes
GetReg command to Status_1 register.
NTC
ROC1b
OCSETx
ROC2
Figure 17. OCP Setting with Temperature Compensation
Over Current Protection
The CORE/GFX VR compares a programmable current
limit set point to the voltage from the current sense amplifier
output for Over Current Protection (OCP). The voltage
applied to OCSETx pin defines the desired peak current
limit threshold ILIMIT :
VOCSET = 48 x ILIMIT x RSENSE
(22)
Connect a resistive voltage divider from VCC to GND, with
the joint of the resistive divider connected to OCSET pin
as shown in Figure 16. For a given ROC2, then
⎛ VCC
⎞
(23)
ROC1 = ROC2 × ⎜
− 1⎟
V
⎝ OCSET
⎠
VCC
ROC1
OCSETx
ROC2
Figure 16. OCP Setting without Temperature
Compensation
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
ROC1a
Usually, ROC1a is selected to be equal to the thermistor's
nominal resistance at room temperature. Ideally, VOCSET
is assumed to have the same temperature coefficient as
RSENSE (Inductor DCR) :
VOCSET, HOT
RSENSE, HOT
=
VOCSET, COLD RSENSE, COLD
(24)
According to the basic circuit calculation, VOCSET can be
obtained at any temperature :
VOCSET, T = VCC ×
ROC2
ROC1a / /RNTC, T + ROC1b + ROC2
(25)
Re-write (24) from (25), to get VOCSET at room temperature
ROC1a // RNTC, COLD + ROC1b + ROC2
RSENSE, HOT
=
ROC1a // RNTC, HOT + ROC1b + ROC2
RSENSE, COLD
(26)
VOCSET, 25 =
VCC ×
ROC2
ROC1a / /RNTC, 25 + ROC1b + ROC2
(27)
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
37
RT8165A
Under Voltage Lock Out (UVLO)
Solving (26) and (27) yields ROC1b and ROC2
ROC2 =
α × REQU, HOT − REQU, COLD + (1 − α ) × REQU, 25
VCC
× (1 − α )
VOCSET, 25
ROC1b =
(28)
(α − 1) × R2 + α × REQU, HOT − REQU, COLD
(29)
(1 − α )
where
α=
RSENSE, HOT
DCR25 × [1 + 0.00393 × (THOT − 25)]
=
RSENSE, COLD DCR25 × [1 + 0.00393 × (TCOLD − 25)]
REQU, T = ROC1a // RNTC, T
The switching frequency and ripple current determine the
inductor value as follows :
LMIN =
VIN − VOUT
×t
IRipple(MAX) ON
(32)
where tON is the UGATE turn on period.
(31)
Higher inductance induces less ripple current and hence
higher efficiency. However, the tradeoff is a slower transient
response of the power stage to load transients. This might
increase the need for more output capacitors, thus driving
up the cost. Find a low-loss inductor having the lowest
possible DC resistance that fits in the allotted dimensions.
The core must be large enough not to be saturated at the
peak inductor current.
The over voltage protection circuit of CORE/GFX VR
monitors the output voltage via the ISENxN pin. The
supported maximum operating VID of VR (V(MAX)) is stored
in the Vout_Max register. Once VISENxN exceeds “V(MAX)
+ 200mV”, OVP is triggered and latched. VR will try to
turn on low side MOSFETs and turn off high side
MOSFETs to protect CPU. When OVP is triggered by
the one of the VRs, the other VR will enter soft shutdown
sequence. A 1μs delay is used in OVP detection circuit
to prevent false trigger.
Negative Voltage Protection (NVP)
During OVP latch state, both CORE/GFX VRs also monitor
ISENxN pin for negative voltage protection. Since the OVP
latch will continuously turn on low side MOSFET of VR,
VR may suffer negative output voltage. Therefore, when
the voltage of ISENxN drops below −0.05V after triggering
OVP, VR will turn off low side MOSFETs while high side
MOSFETs remain off. The NVP function will be active only
after OVP is triggered.
Under Voltage Protection (UVP)
Both CORE/GFX VR implement Under Voltage Protection
(UVP). If ISENxN is less than VREFx by 300mV + VOFFSET,
VR will trigger UVP latch. The UVP latch will turn off both
high side and low side MOSFETs. When UVP is triggered
by one of the VRs, the other VR will enter into soft
shutdown sequence. The UVP mechanism is masked
when VRx_READY = low.
www.richtek.com
38
Inductor Selection
(30)
Over Voltage Protection (OVP)
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
During normal operation, if the voltage at the VCC pin
drops below UVLO falling edge threshold, both VR will
trigger UVLO. The UVLO protection forces all high side
MOSFETs and low side MOSFETs off to turn off.
Output Capacitor Selection
Output capacitors are used to obtain high bandwidth for
the output voltage beyond the bandwidth of the converter
itself. Usually, the CPU manufacturer recommends a
capacitor configuration. Two different kinds of output
capacitors can be found, bulk capacitors closely located
to the inductors and ceramic output capacitors in close
proximity to the load. Latter ones are for mid-frequency
decoupling with very small ESR and ESL values while the
bulk capacitors have to provide enough stored energy to
overcome the low-frequency bandwidth gap between the
regulator and the CPU.
Layout Considerations
Careful PC board layout is critical to achieving low
switching losses and clean, stable operation. The
switching power stage requires particular attention. If
possible, mount all of the power components on the top
side of the board with their ground terminals flushed
against one another. Follow these guidelines for optimum
PC board layout :
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
`
Keep the high current paths short, especially at the
ground terminals.
`
Keep the power traces and load connections short. This
is essential for high efficiency.
`
When trade-offs in trace lengths must be made, it's
preferable to allow the inductor charging path to be made
longer than the discharging path.
`
Place the current sense component close to the
controller. ISENxP and ISENxN connections for current
limit and voltage positioning must be made using Kelvin
sense connections to guarantee the current sense
accuracy. The PCB trace from the sense nodes should
be parallel to the controller.
`
Route high-speed switching nodes away from sensitive
analog areas (COMPx, FBx, ISENxP, ISENxN, etc...)
`
Special attention should be paid in placing the DCR
current sensing components. The DCR current sensing
capacitor and resistors must be placed close to the
controller.
`
The capacitor connected to the ISEN1N/ISENAN for noise
decoupling is optional and it should also be placed close
to the ISEN1N/ISENAN pin.
`
The NTC thermistor should be placed physically close
to the inductor for better DCR thermal compensation.
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
DS8165A-05 July 2014
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
39
RT8165A
Outline Dimension
1
1
2
2
DETAIL A
Pin #1 ID and Tie Bar Mark Options
Note : The configuration of the Pin #1 identifier is optional,
but must be located within the zone indicated.
Symbol
Dimensions In Millimeters
Dimensions In Inches
Min.
Max.
Min.
Max.
A
0.700
0.800
0.028
0.031
A1
0.000
0.050
0.000
0.002
A3
0.175
0.250
0.007
0.010
b
0.150
0.250
0.006
0.010
D
5.950
6.050
0.234
0.238
Option 1
4.250
4.350
0.167
0.171
Option 2
4.350
4.450
0.171
0.175
5.950
6.050
0.234
0.238
Option 1
4.250
4.350
0.167
0.171
Option 2
4.350
4.450
0.171
D2
E
E2
e
L
0.400
0.350
0.175
0.016
0.450
0.014
0.018
W-Type 48L QFN 6x6 Package
Copyright © 2014 Richtek Technology Corporation. All rights reserved.
www.richtek.com
40
is a registered trademark of Richtek Technology Corporation.
DS8165A-05 July 2014
RT8165A
Richtek Technology Corporation
14F, No. 8, Tai Yuen 1st Street, Chupei City
Hsinchu, Taiwan, R.O.C.
Tel: (8863)5526789
Richtek products are sold by description only. Richtek reserves the right to change the circuitry and/or specifications without notice at any time. Customers should
obtain the latest relevant information and data sheets before placing orders and should verify that such information is current and complete. Richtek cannot
assume responsibility for use of any circuitry other than circuitry entirely embodied in a Richtek product. Information furnished by Richtek is believed to be
accurate and reliable. However, no responsibility is assumed by Richtek or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Richtek or its subsidiaries.
DS8165A-05 July 2014
www.richtek.com
41