SANKEN ELECTRIC CO., LTD. EM01A １ Scope The present specifications shall apply to Sanken silicon diode, EM01A. ２ Outline Type Silicon Rectifier Diode (Mesa type) Structure Resin Molded Applications Commercial Frequency Rectification, etc Flammability: UL94V-0 (Equivalent) ３ Absolute maximum ratings No. Item Symbol Unit Rating 1 Transient Peak Reverse Voltage VRSM V 650 2 Peak Reverse Voltage VRM V 600 3 Average Forward Current IF(AV) A 1.0 4 Peak Surge Forward Current IFSM A 45 5 Junction Temperature Tj °C -4 0 to +1 5 0 6 Storage Temperature Tstg °C -4 0 to +1 5 0 ４ Electrical characteristics (Ta=25°C, unless otherwise specified) Symbo No. Item Unit l Conditions Refer to Derating curve in Section 6 10ms. Half sine wave, one shot Rating Conditions 1 Forward Voltage Drop VF V 0.97 max. IF=1.0A 2 Reverse Leakage Current IR µA 1 0 max. VR=VRM 3 Reverse Leakage Current Under High Temperature H･IR µA 5 0 max. VR=VRM, Ta=100°C 4 Thermal Resistance Rth(j-l) °C/W 2 0 max. Between Junction and Lead 040818 1／3 61426-01 SANKEN ELECTRIC CO., LTD. EM01A ５ VF test and test circuit ６ Derating Derating to the ambient temperature. Power loss generated by voltage is not taken into consideration. 040818 2／3 61426-01 SANKEN ELECTRIC CO., LTD. EM01A ７ Package information ７-１ Package type, physical dimensions and material } 0.7 62.3 } 0.2 5.0 } 0.05 Ó0.6 ¦1 0.2 } Ó2.7 ¦3 ¦2 Dimensions in mm ※1 The allowance position of Body against the center of whole lead wire is 0.5mm(max.) ※2 The centric allowance of lead wire against center of physical body is 0.2mm(max.) ※3 The burr may exit up to 2mm from the body of lead ７-２ Appearance The body shall be clean and shall not bear any stain, rust or flaw. ７-３ Marking Cathode Mark ① Type number M0 as abbreviated of EM01A ② Class number：A ③ Lot number A：Last digit of calendar year B：Month (From 1 to 9 for Jan. to Sep. O for Oct. N for Nov. D for Dec.) ④Ten days (･first ten days,･･second ten days,…third ten days) The type No. VRM rank and Lot No. are to be marked in white. 040818 3／3 61426-01