THICK FILM CHIP RESISTOR GENERAL PURPOSE RC1210 Thick Film Chip Resistor – General Purpose Features • • • • Small and light weight Excellent heat resistance and moisture resistance Suitable size and packaging for surface mount assembly RoHS Compliant Applications • For general purpose applications • For laptop and notebook computer, memory module, digital camera and telecommunication equipment Absolute Maximum Ratings & Characteristics Product Number RC1210 mm Tolerance 3225 J: ±5% F: ±1% Power Rating @70˚C 1/3W MAX MAX Working Overload TCR ppm/℃ Voltage Voltage 200V 400V Resistance Range ±200 1Ω ~ 9.76Ω ±100 10Ω ~ 1MΩ ±200 1.02MΩ ~ 10MΩ Rated Working Temperature -55℃~+155℃ *Jumper Product Number Jumper Rated Current Resistance Rated Working Temperature RC1210 2.5A 50mΩ (max.) -55℃~+155℃ TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON Fax: (800)-TAITFAX (800)-824-8766 (800)-824-8329 (661)-257-6060 (661)-257-6415 Rev. C/JJ 2007-08-10 Page 1 of 7 Thick Film Chip Resistor – General Purpose RC1210 Power Derating Curve Percentage of the rated dissipation (%) For resistors operate in the ambient temperature over 70˚C, loading power ratio will de-rate in accordance with following curve. Ambient Temperature (℃) Max. Dissipation of rated power as a function of the ambient temperature Soldering Condition IR Reflow soldering Wave soldering (flow soldering) Rev. C/JJ 2007-08-10 www.taitroncomponents.com Page 2 of 7 Thick Film Chip Resistor – General Purpose RC1210 Dimensions (in mm) Product Number mm L W H A B Average Weight RC1210 3225 3.20 ± 0.20 2.60± 0.15 0.55 ± 0.10 0.50 ± 0.25 0.50 ± 0.20 15.04 mg Marking (1) ±5% Tolerance (J): 3 digits, the first two digits are significant figures; the third digit is number of zeros to follow. Letter “R” is as decimal point; Letter “0” for jumper. (2) ±1% Tolerance (F): 4 digits, the first three digits are significant figures; the fourth digit is number of zeros. Letter “R” is as decimal point; Letter “0” for jumper. Examples: 3 digits marking (±5%) 683 = 68x103 Ω = 68000 Ω = 68KΩ Jumper 4 digits marking (±1%) 6812 = 681x102Ω = 68100 Ω = 68.1KΩ 7R5 = 7.5 Ω Rev. C/JJ 2007-08-10 www.taitroncomponents.com Page 3 of 7 Thick Film Chip Resistor – General Purpose RC1210 Test and Requirements Test Item Test Method Test Condition ±1% ±5% Jumper Temperature Coefficient of Resistance(T.C.R.) JIS C 5201 4.8 IEC 60115-1 4.8 Short Time Overload JIS C 5201 4.13 IEC 60115-1 4.13 Insulation Resistance JIS C 5201 4.6 IEC 60115-1 4.6 Max. overload voltage for 1 minute Voltage Proof JIS C 5201 4.7 IEC 60115-1 4.7 1.42 times RCWV (RMS) for 1 minute no breakdown or flashover Substrate Bending Test JIS C 5201 4.33 IEC 60115-1 4.33 Bending once with 5 seconds for 3 mm ±(1.0%+0.05Ω) ±(1.0%+0.05Ω) <50mΩ Resistance to soldering heat JIS C 5201 4.18 IEC 60115 4.18 260±5°C for 10 seconds ±(0.5%+0.05Ω) ±(1.0%+0.05Ω) <50mΩ Leaching JIS C 5201 4.18 IEC 60115 4.18 260±5°C for 60 seconds no leaching Solderability JIS C 5201 4.17 IEC 60115-1 4.17 245±5°C for 3 seconds. >95% coverage Endurance at upper category temperature JIS C 5201 4.23 IEC 60115-1 2.23.2 at +155°C for 1000 hrs ±(1.0%+0.05Ω) ±(1.5%+0.10Ω) <50mΩ Rapid change of temperature JIS C 5201 4.19 IEC 60115-1 4.19 -55°C to +155°C, 5 cycles ±(0.5%+0.05Ω) ±(1.0%+0.05Ω) <50mΩ ±(2.0%+0.10Ω) ±(3.0%+0.10Ω) <100mΩ ±(2.0%+0.10Ω) ±(3.0%+0.10Ω) <100mΩ Damp heat with load JIS 5201 4.24 Endurance JIS C 5201 4.25 IEC 60115-1 4.25.1 -55°C~+155,20°C is the reference temperature 2.5 times RCWV or max. overload voltage for 5 seconds Requirement 40±2°C, 90~95% R.H. or max. working voltage for 1000 hrs with 1.5hrs “ON” and 0.5 hrs “OFF” 70±2°C, RCWV or Max. working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” Within the specification ±(1.0%+0.05Ω) ±(2.0%+0.05Ω) <50mΩ ≥10G Note: RCWV：Rated Continuous Working Voltage. RCWV= √Rated power (W) × Resistance value (R) Rev. C/JJ 2007-08-10 www.taitroncomponents.com Page 4 of 7 Thick Film Chip Resistor – General Purpose RC1210 Packing Information: Carrier Tape Dimensions (in mm) Type A B W E F P0 P1 P2 ψD0 T RC1210 2.80±0.1 3.50±0.2 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.05 2.0±0.05 1.5+0.1/-0 0.85±0.1 Reel Dimensions (in mm) Reel Diameter PCS per Reel A B C W T 7’’ 5,000 180+0/-3 60+1/-0 13.0±0.2 9.0±0.5 11.4±1 13’’ 20,000 330±1 100±1 13.0±0.2 9.5±0.5 13.5±1 Carton Information PCS per Carton Carton Size 300,000 400X400X200 ( in mm) Rev. C/JJ 2007-08-10 www.taitroncomponents.com Page 5 of 7 Thick Film Chip Resistor – General Purpose RC1210 How to Order RC 1210 J 103 - xx - TR70 Packing Code BL: Bulk, RoHS TR70: Tape and Reel, 7”reel, RoHS Factory Location Code Resistance Value Code (in Ohm) J series (E-24) 3 digit coding system “000” for Jumper F series (E-24/E-96) 4 digit coding system Resistance Tolerance J: ±5%; (F: ±1%; Available upon request) 1210(inch): 3.2×2.5(mm) cross to 3225(mm) Chip Resistor – General Purpose Rev. C/JJ 2007-08-10 www.taitroncomponents.com Page 6 of 7 Thick Film Chip Resistor – General Purpose RC1210 How to contact us: US HEADQUARTERS 28040 WEST HARRISON PARKAWAY, VALENCIA, CA 91355-4162 Tel: (800) TAITRON (800) 824-8766 (661) 257-6060 Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415 Email: [email protected] Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970 MEXICO Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052 TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLASA, 1160 WEST YAN’AN ROAD, SUITE 1502, SHANGHAI, 200052,CHINA Tel: +86-21-5424-9942 Fax: +86-21-5424-9931 Rev. C/JJ 2007-08-10 www.taitroncomponents.com Page 7 of 7