1N4001 - Taitron Components, Inc.

1A Standard Rectifiers
1N4001 - 1N4007
1A Standard Rectifiers
Features




Low forward voltage drop
Low leakage current
High forward surge current capability
High temperature soldering guaranteed: 265°C/10 seconds
/.037" (9.5mm) lead length, 5lbs (2.3kg) tension
 RoHS compliance
DO-204AL
(DO-41)
Mechanical Data
Case:
Epoxy:
Terminals:
DO-204AL, molded epoxy body
Plastic package has UL flammability classification 94V-0
Plated axial leads, solderable per MIL-STD-202E, Method 208C
Polarity:
Color band denotes cathode end
Mounting
Position:
Any
Weight:
0.012 ounce, 0.33 gram
Maximum Ratings and Electrical Characteristics (T A=25ºC unless noted otherwise)
Symbol
Description
VRRM
Maximum Repetitive
Peak Reverse Voltage
Maximum RMS
Voltage
Maximum DC Blocking
Voltage
Maximum Average
Forward Rectified
Current
VRMS
VDC
IF(AV)
1N4001
1N4002
1N4003
1N4004
1N4005
1N4006
1N4007
Unit
50
100
200
400
600
800
1000
V
35
70
140
280
420
560
700
V
50
100
200
400
600
800
1000
V
1.0
A
IFSM
Peak Forward Surge
Current
30
A
IR(AV)
Maximum Full Load
Reverse Current, Full
Cycle Average
30
µA
TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com
Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060
Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415
Conditions
0.375" (9.5 mm)
lead length at
TA=75 °C
8.3ms single half
sine-wave
superimposed on
rated load (JEDEC
Method)
0.375" (9.5 mm)
lead length at
TL=75 °C
Rev. E/AH
Page 1 of 6
1A Standard Rectifiers
1N4001 - 1N4007
Symbol
I²t
VF
IR
CJ
RthJA
RthJL
TJ,
TSTG
Description
1N4001
1N4002
1N4003
Rating for Fusing
(t<8.3ms)
Maximum
Instantaneous
Forward Voltage
Maximum DC Reverse
Current at Rated DC
Blocking Voltage
Typical Junction
Capacitance
Typical Thermal
Resistance
1N4004
1N4005
1N4006
1N4007
Unit
Conditions
3.7
A²s
Note 1
1.1
V
IF=1.0A
5.0
TA=25°C
µA
50
TA=125°C
15
pF
VR=4V, f=1MHz
50
°C / W
Note 2
25
Operating Junction
and Storage
Temperature Range
-50 to +150
°C
Note: 1. For device using on bridge rectifier application.
2. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted.
Typical Characteristics Curves
Fig.2-Max. Non-repetitive Peak Forward Surge Current
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
Fig.1- Forward Current Derating Curve
Junction Temperature (°C)
Number of Cycle at 60Hz
Rev. E/AH
www.taitroncomponents.com
Page 2 of 6
1A Standard Rectifiers
1N4001 - 1N4007
Fig.3-Typical Instantaneous Forward Characteristic
Instantaneous Forward Current (A)
Instantaneous Reverse Current (µA)
Fig.4-Typical Reverse Characteristics
Instantaneous Forward Voltage (V)
Percent of Rated Peak Reverse Voltage (%)
Junction Capacitance (pF)
Fig.5-Typical Junction Capacitance
Reverse Voltage (V)
Rev. E/AH
www.taitroncomponents.com
Page 3 of 6
1A Standard Rectifiers
1N4001 - 1N4007
Dimensions in inch (mm)
DO-204AL
(DO-41)
Packing Information:
Packing Quantity Information:
Quantity
PCS per
PCS per Carton
Tape & Reel
5,000 / Reel
20,000
Bulk
1,000 / Box
50.000
Carton Size Information:
Item
Carton Size
Tape & Reel
360X350X345 ( in mm)
Bulk
475X225X260 ( in mm)
Rev. E/AH
www.taitroncomponents.com
Page 4 of 6
1A Standard Rectifiers
1N4001 - 1N4007
Axial Lead Taping Specifications
Axial lead devices are packed in accordance with EIA standard RS-296-E and specifications given
below.
Component
Inner Tape
Cumulative Pitch
Pitch A
Pitch B
Tolerance
DO-41
5.0mm±0.5mm
52.4mm+1.5mm/-0.4mm
Not to Exceed 1.5mm
(0.059") over 6 consecutive
components.
Item
Symbol
Specification (mm)
Specification (inch)
Component alignment
Z
1.2 max.
0.048 max.
Tape width
T
6.0±0.4
0.236±0.016
Exposed adhesive
E
0.8 max
0.032 max.
Body eccentricity
l L1-L2 l
1.0 max.
0.040 max.
Reel outside diameter
D
330.0
13.0
Reel inner diameter
D1
85.7±5.0
3.375±0.197
Feed hole diameter
D0
30.0±5.0
1.181±0.197
Reel width
W
79.0±1.0
3.110±0.040
Outline
Note: Each component lead shall be sandwiched between tapes for a minimum of 3.2mm (0.126")
Rev. E/AH
www.taitroncomponents.com
Page 5 of 6
1A Standard Rectifiers
1N4001 - 1N4007
How to Order
1N400
7 –XX–TR30
Packing Code
TR30: 13” Tape & Reel, RoHS
BL: Bulk, RoHS
Factory Location Code
Repetitive Peak Reverse Voltage
7: 1000V
1A Standard Rectifiers
How to contact us
USA HEADQUARTERS
28040 WEST HARRISON PARKWAY, VALENCIA, CA 91355-4162
Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060
Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415
Email: taitron@taitroncomponents.com
Http://www.taitroncomponents.com
TAITRON COMPONENTS INCORPORATED TAIWAN BRANCH
6F., NO.190, SEC. 2, ZHONGXING RD., XINDIAN DIST., NEW TAIPEI CITY 23146, TAIWAN R.O.C.
Tel: 886-2-2913-6238
Fax: 886-2-2913-6239
TAITRON COMPONENT TECHNOLOG SHANGHAI CORPORATION
SUITE 1503, METROBANK PLAZA, 1160 WEST YAN’AN ROAD, SHANGHAI, 200052, CHINA
Tel: +86-21-5424-9942
Fax: +86-21-2302-5027
Rev. E/AH
www.taitroncomponents.com
Page 6 of 6