1A Standard Rectifiers 1N4001 - 1N4007 1A Standard Rectifiers Features Low forward voltage drop Low leakage current High forward surge current capability High temperature soldering guaranteed: 265°C/10 seconds /.037" (9.5mm) lead length, 5lbs (2.3kg) tension RoHS compliance DO-204AL (DO-41) Mechanical Data Case: Epoxy: Terminals: DO-204AL, molded epoxy body Plastic package has UL flammability classification 94V-0 Plated axial leads, solderable per MIL-STD-202E, Method 208C Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.33 gram Maximum Ratings and Electrical Characteristics (T A=25ºC unless noted otherwise) Symbol Description VRRM Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current VRMS VDC IF(AV) 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 600 800 1000 V 1.0 A IFSM Peak Forward Surge Current 30 A IR(AV) Maximum Full Load Reverse Current, Full Cycle Average 30 µA TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415 Conditions 0.375" (9.5 mm) lead length at TA=75 °C 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) 0.375" (9.5 mm) lead length at TL=75 °C Rev. E/AH Page 1 of 6 1A Standard Rectifiers 1N4001 - 1N4007 Symbol I²t VF IR CJ RthJA RthJL TJ, TSTG Description 1N4001 1N4002 1N4003 Rating for Fusing (t<8.3ms) Maximum Instantaneous Forward Voltage Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance Typical Thermal Resistance 1N4004 1N4005 1N4006 1N4007 Unit Conditions 3.7 A²s Note 1 1.1 V IF=1.0A 5.0 TA=25°C µA 50 TA=125°C 15 pF VR=4V, f=1MHz 50 °C / W Note 2 25 Operating Junction and Storage Temperature Range -50 to +150 °C Note: 1. For device using on bridge rectifier application. 2. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted. Typical Characteristics Curves Fig.2-Max. Non-repetitive Peak Forward Surge Current Peak Forward Surge Current (A) Average Forward Rectified Current (A) Fig.1- Forward Current Derating Curve Junction Temperature (°C) Number of Cycle at 60Hz Rev. E/AH www.taitroncomponents.com Page 2 of 6 1A Standard Rectifiers 1N4001 - 1N4007 Fig.3-Typical Instantaneous Forward Characteristic Instantaneous Forward Current (A) Instantaneous Reverse Current (µA) Fig.4-Typical Reverse Characteristics Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (%) Junction Capacitance (pF) Fig.5-Typical Junction Capacitance Reverse Voltage (V) Rev. E/AH www.taitroncomponents.com Page 3 of 6 1A Standard Rectifiers 1N4001 - 1N4007 Dimensions in inch (mm) DO-204AL (DO-41) Packing Information: Packing Quantity Information: Quantity PCS per PCS per Carton Tape & Reel 5,000 / Reel 20,000 Bulk 1,000 / Box 50.000 Carton Size Information: Item Carton Size Tape & Reel 360X350X345 ( in mm) Bulk 475X225X260 ( in mm) Rev. E/AH www.taitroncomponents.com Page 4 of 6 1A Standard Rectifiers 1N4001 - 1N4007 Axial Lead Taping Specifications Axial lead devices are packed in accordance with EIA standard RS-296-E and specifications given below. Component Inner Tape Cumulative Pitch Pitch A Pitch B Tolerance DO-41 5.0mm±0.5mm 52.4mm+1.5mm/-0.4mm Not to Exceed 1.5mm (0.059") over 6 consecutive components. Item Symbol Specification (mm) Specification (inch) Component alignment Z 1.2 max. 0.048 max. Tape width T 6.0±0.4 0.236±0.016 Exposed adhesive E 0.8 max 0.032 max. Body eccentricity l L1-L2 l 1.0 max. 0.040 max. Reel outside diameter D 330.0 13.0 Reel inner diameter D1 85.7±5.0 3.375±0.197 Feed hole diameter D0 30.0±5.0 1.181±0.197 Reel width W 79.0±1.0 3.110±0.040 Outline Note: Each component lead shall be sandwiched between tapes for a minimum of 3.2mm (0.126") Rev. E/AH www.taitroncomponents.com Page 5 of 6 1A Standard Rectifiers 1N4001 - 1N4007 How to Order 1N400 7 –XX–TR30 Packing Code TR30: 13” Tape & Reel, RoHS BL: Bulk, RoHS Factory Location Code Repetitive Peak Reverse Voltage 7: 1000V 1A Standard Rectifiers How to contact us USA HEADQUARTERS 28040 WEST HARRISON PARKWAY, VALENCIA, CA 91355-4162 Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415 Email: [email protected] Http://www.taitroncomponents.com TAITRON COMPONENTS INCORPORATED TAIWAN BRANCH 6F., NO.190, SEC. 2, ZHONGXING RD., XINDIAN DIST., NEW TAIPEI CITY 23146, TAIWAN R.O.C. Tel: 886-2-2913-6238 Fax: 886-2-2913-6239 TAITRON COMPONENT TECHNOLOG SHANGHAI CORPORATION SUITE 1503, METROBANK PLAZA, 1160 WEST YAN’AN ROAD, SHANGHAI, 200052, CHINA Tel: +86-21-5424-9942 Fax: +86-21-2302-5027 Rev. E/AH www.taitroncomponents.com Page 6 of 6