OPTOWAY SPM

Optoway
SPM-8600LG
1
***********************************************************************************************************************************************************************
SPM-8600LG / SPM-8600BLG
(RoHS Compliant)
1310 nm TX / 1550 nm RX , 3.3V / 4.25 Gbps 1-Fiber Multi-Mode LC SFP Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l
l
l
l
l
l
l
l
l
l
l
l
l
The SPM-8600LG series is high performance multi-mode
module for 4x/2x/1x Fibre Channel and 1000BASE-BX
Gigabit Ethernet multi-mode fiber communications by using
1310 nm transmitter and 1550 nm receiver. It is with the SFP
20-pin connector to allow hot plug capability. The
transmitter section uses a multiple quantum well 1310 nm
laser and is a class 1 laser compliant according to
International Safety Standard IEC 60825. The receiver
section uses an integrated 1550 nm detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC.
1-Fiber Bi-Directional SFP Optical Transceiver
Up to 4.25 Gb/s
Simplex LC Connector
Compliant with Fibre Channel FC-PI 400/200/100
Compliant with IEEE 802.3ah-2004 1000BASE-BX
1310 nm LD Transmitter
1550 nm Receiver
Up to 300 m on 50/125 µm & 62.5/125 µm MMF
AC/AC Coupling according to MSA
Single +3.3 V Power Supply
0 to 70oC Operation: SPM-8600LG
-10 to 85oC Operation: SPM-8600BLG
Class 1 Laser International Safety Standard IEC 60825
Compliant
APPLICATIONS
l Fibre Channel Links
l WDM Gigabit Ethernet Links
l SONET/SDH Equipment Interconnect
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
SPM-8600LG
SPM-8600BLG
4 /2/1
4 /2/1
Distance
(m)
300
300
TX
(nm)
1310
1310
RX
(nm)
1550
1550
Package
LC SFP
LC SFP
Temp
(oC)
0 to 70
-10 to 85
TX Power
(dBm)
-2 to -9
-2 to -9
RX Sens.
(dBm)
-15
-15
RoHS
Compliant
Yes
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Symbol
Tstg
Topr
Relative Humidity
Power Supply Voltage
Input Voltage
RH
Vcc
---
Min
-40
0
-10
0
0
GND
Max
85
70
85
85
3.6
Vcc
Units
o
C
o
C
Output Current
Iout
0
30
mA
Min
3.13
Typ
3.3
200
Max
3.47
300
70
85
%
V
V
Notes
SPM-8600LG
SPM-8600BLG
Non condensing
Recommended Operating Conditions
Parameter
Power Supply Voltage
Power Supply Current
Operating Case Temperature
Data Rate
Symbol
Vcc
ICC (TX+RX)
Topr
0
-10
1
4.25
Units / Notes
V
mA
o
C / SPM-8600LG
o
C / SPM-8600BLG
Gb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw 1/1/2007
V1.0
Optoway
SPM-8600LG
2
***********************************************************************************************************************************************************************
Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V)
Parameter
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
TX Disable Input Voltage – Low
TX Disable Input Voltage – High
TX Disable Assert Time
TX Disable Deassert Time
TX Fault Output Voltage -- Low
TX Fault Output Voltage -- High
Symbol
Min
Typ
Po
λ
σλ
tr
tf
RIN
-9
1260
1310
IIL
IIH
VIH - VIL
TDIS, L
TDIS, H
TASSERT
T DEASSERT
TFaultL
TFaultH
-350
0.5
0
2.0
0
2.0
Max
Units
Notes
-2
1360
4
90
90
-118
dBm
nm
nm
ps
ps
dB/Hz
1
350
2.4
0.5
Vcc
10
1
0.5
Vcc+0.3
µA
µA
V
V
V
µs
ms
V
V
RMS (σ)
20 % to 80% Values
20 % to 80% Values
Peak-to-Peak
2
2
3
3
1. Output power is power coupled into a 62.5/125 µm mulit-mode fiber.
2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3.47V)
Parameter
Optical
Sensitivity @ 4.25 Gb/s
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Differential Output Voltage
Output LOS Voltage -- Low
Output LOS Voltage – High
Signal Detect Assert Time
Signal Detect Deassert Time
Symbol
Min
Typ
Max
Units
Notes
Sen.
Pin
Pa
Pd
--0
---31
1.0
1480
-----------
-15
---15
---
4
1580
dBm
dBm
dBm
dBm
dB
nm
2.0
0.5
Vcc+0.3
100
300
V
V
V
µs
µs
VOH – VOL
VOL
V OH
ASMAX
ANSMAX
0.6
0
2.0
Transition: low to high
Transition: high to low
5
6
6
OFF to ON
ON to OFF
4. Measured at PRBS 27-1 at BER 1E-12.
5. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm.
6. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
1/1/2007 V1.0
Optoway
SPM-8600LG
3
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
Signal Name
1
2
3
TX GND
TX Fault
TX Disable
4
MOD-DFE2
5
MOD-DEF1
6
MOD-DEF0
7
8
9
10
N/C
LOS
RX GND
RX GND
Description
PIN
Transmitter Ground
Transmitter Fault Indication
Transmitter Disable (Module disables
on high or open)
Modulation Definition 2 – Two wires
serial ID Interface
Modulation Definition 1 – Two wires
serial ID Interface
Modulation Definition 0 – Ground in
Module
Not Connected
Loss of Signal
Receiver Ground
Receiver Ground
11
12
13
RX GND
Receiver Ground
RX DATA OUT- Inverse Receiver Data Out
RX DATA OUT+ Receiver Data Out
Signal Name
Description
14
RX GND
Receiver Ground
15
Vcc RX
Receiver Power – 3.3V±5%
16
Vcc TX
Transmitter Power – 3.3V±5%
17
18
19
20
TX GND
TX DATA IN+
TX DATA INTX GND
Transmitter Ground
Transmitter Data In
Inverse Transmitter Data In
Transmitter Ground
Module Definition
Module Definition
MOD-DEF2
PIN 4
MOD-DEF1
PIN 5
MOD-DEF0
PIN 6
Interpretation by Host
4
SDA
SCL
LV-TTL Low
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
1/1/2007 V1.0
Optoway
SPM-8600LG
4
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
VeeT
Tx_DISABLE
Tx_FAULT
(1,17,20)
3
Tx_DISABLE
2
Tx_FAULT
4.7K to 10KΩ
TD +
LD
Driver
18
TD +
Z=50Ω
100Ω
TD -
19
TD Z=50Ω
VccT
1μH
16
Vcc 3.3V
10μF
10nF
10μF
10nF
SerDes
IC
1μH
VccR
15
10μF
10nF
RD -
12
Protocol
IC
RD Z=50Ω
100Ω
POST
Amp
RD +
13
RD +
Z=50Ω
4.7K to 10KΩ
LOS
VeeR
MOD_DEF(0)
EEPROM
MOD_DEF(1)
MOD_DEF(2)
depending on SERDES
8
LOSS OF SINGAL
(9,10,11,14)
6
MODULE DETECT
5
SCL
4
SDA
4.7K to 10KΩ
4.7K to 10KΩ
SFP module
Vcc 3.3V
4.7K to 10KΩ
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
1/1/2007 V1.0
Optoway
SPM-8600LG
5
***********************************************************************************************************************************************************************
Revision History
Version
1.0
Subject
Initial datasheet
Release Date
2007/1/1
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
1/1/2007 V1.0