Data Sheet - Taitron Components, Inc.

600W Surface Mount
Transient Voltage Suppressor
SMBJ5.0A -440CA
600W Surface Mount Transient Voltage Suppressor
SMB
Features
 Stand-off voltage from 5.0 to 440 volts
 600W Peak Pulse Power capability on 10/1000 μs waveform
repetition rate(duty cycle): 0.01%
 Fast response time: typically less than 1.0ps from 0v to VBR
 Low incremental surge resistance, excellent clamping capability




Typical IR less than 1 uA above 10V
High temperature soldering guaranteed:250°C/10 seconds at terminals
This series is UL recognized under component index. File number E315008
RoHS Compliant
Mechanical Data
Case:
Epoxy:
Terminals:
SMB JEDEC DO-214AA molded plastic
Meets UL 94V-0 flammability rating
Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity:
Cathode indicated by color band except Bi-directional
Weight:
0.003 ounces, 0.093 gram
Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Symbol
Description
Value
Unit
5.0 to 440
V
600 Minimum
W
Non-repetitive current pulse
See Table
A
Non-repetitive current pulse
Steady State Power Dissipation
5.0
W
At TL(Lead Temperature)=75°C
(Note 1)
IFSM
Peak Forward Surge Current
100
A
Note 1 &2
VF
Maximum Instantaneous
Forward Voltage
V
IF=50A, Unidirectional Only
V WM
Stand-Off Voltage
PPPM
Peak Pulse Power Dissipation
on 10/1000 us waveform
IPPM
Peak Pulse current
on 10/1000 us waveform
PM(AV)
TJ,TSTG
3.5
VWM <200
5.0
VWM ≥200
Operating and Storage
Temperature Range
-55 to 150
TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com
Tel: (800)-TAITRON
Fax: (800)-TAITFAX
(800)-824-8766
(800)-824-8329
(661)-257-6060
(661)-257-6415
Conditions
°C
Rev. G/AH
Page 1 of 7
600W Surface Mount Transient Voltage Suppressor
SMBJ5.0A -440CA
Note: (1) PCB mounted on copper pad area of 0.2" x 0.2" (5.0mmx5.0mm).
(2) 8.3ms single half sine-wave superimposed on rated load.
Electrical Characteristics (T Ambient=25ºC unless noted otherwise)
P/N (note1)
Device
Marking
Code
Stand-Off
Voltage
Breakdown Voltage
@ Test Current
V BR
IPPM
Max.
Peak
Pulse
Current
Max.
Reverse
Leakage
Current
@ V WM
VC (V)
IPPM (A)
ID (A)
Max.
Clamping
Voltage @
IT(mA)
Uni-Polar
Bi-Polar
Uni
Bi
V WM (V)
Min.
Max.
SMBJ5.0A
SMBJ5.0CA
KE
KE
5.0
6.40
7.07
10
9.2
65.2
800/1600
SMBJ6.0A
SMBJ6.0CA
KG
KG
6.0
6.67
7.37
10
10.3
58.3
800/1600
SMBJ6.5A
SMBJ6.5CA
KK
AK
6.5
7.22
7.98
10
11.2
53.6
500/1000
SMBJ7.0A
SMBJ7.0CA
KM
KM
7.0
7.78
8.60
10
12.0
50.0
200/400
SMBJ7.5A
SMBJ7.5CA
KP
AP
7.5
8.33
9.21
1.0
12.9
46.5
100/200
SMBJ8.0A
SMBJ8.0CA
KR
AR
8.0
8.89
9.83
1.0
13.6
44.1
50/100
SMBJ8.5A
SMBJ8.5CA
KT
AT
8.5
9.44
10.4
1.0
14.4
41.7
20
SMBJ9.0A
SMBJ9.0CA
KV
AV
9.0
10.0
11.1
1.0
15.4
39.0
10
SMBJ10A
SMBJ10CA
KX
AX
10
11.1
12.3
1.0
17.0
35.3
5.0
SMBJ11A
SMBJ11CA
KZ
KZ
11
12.2
13.5
1.0
18.2
33.0
5.0
SMBJ12A
SMBJ12CA
LE
BE
12
13.3
14.7
1.0
19.9
30.2
5.0
SMBJ13A
SMBJ13CA
LG
LG
13
14.4
15.9
1.0
21.5
27.9
1.0
SMBJ14A
SMBJ14CA
LK
BK
14
15.6
17.2
1.0
23.2
25.9
1.0
SMBJ15A
SMBJ15CA
LM
BM
15
16.7
18.5
1.0
24.4
24.6
1.0
SMBJ16A
SMBJ16CA
LP
LM
16
17.8
19.7
1.0
26.0
23.1
1.0
SMBJ17A
SMBJ17CA
LR
LR
17
18.9
20.9
1.0
27.6
21.7
1.0
SMBJ18A
SMBJ18CA
LT
BT
18
20.0
22.1
1.0
29.2
20.5
1.0
SMBJ20A
SMBJ20CA
LV
LV
20
22.2
24.5
1.0
32.4
18.5
1.0
SMBJ22A
SMBJ22CA
LX
BX
22
24.4
26.9
1.0
35.5
16.9
1.0
SMBJ24A
SMBJ24CA
LZ
BZ
24
26.7
29.5
1.0
38.9
15.4
1.0
SMBJ26A
SMBJ26CA
ME
CE
26
28.9
31.9
1.0
42.1
14.3
1.0
SMBJ28A
SMBJ28CA
MG
MG
28
31.1
34.4
1.0
45.4
13.2
1.0
SMBJ30A
SMBJ30CA
MK
CK
30
33.3
36.8
1.0
48.4
12.4
1.0
SMBJ33A
SMBJ33CA
MM
CM
33
36.7
40.6
1.0
53.3
11.3
1.0
(note2)
Rev. G/AH
www.taitroncomponents.com
Page 2 of 7
600W Surface Mount Transient Voltage Suppressor
SMBJ5.0A -440CA
Device
Marking
Code
P/N
Stand-Off
Voltage
Breakdown Voltage
@ Test Current
IPPM
V BR
Uni-Polar
Bi-Polar
Uni
Bi
SMBJ36A
SMBJ36CA
MP
CP
SMBJ40A
SMBJ40CA
MR
SMBJ43A
SMBJ43CA
SMBJ45A
V WM
Max.
Clamping
[email protected]
IT(mA)
VC (Volts)
Max.
Peak
Pulse
Current
IPPM
Max.
Reverse
Leakage
Current
@ V WM
ID (A)
Min.
Max.
36
40.0
44.2
1.0
58.1
10.3
1.0
CR
40
44.4
49.1
1.0
64.5
9.3
1.0
MT
CT
43
47.8
52.8
1.0
69.4
8.6
1.0
SMBJ45CA
MV
MV
45
50.0
55.3
1.0
72.7
8.3
1.0
SMBJ48A
SMBJ48CA
MX
MX
48
53.3
58.9
1.0
77.4
7.8
1.0
SMBJ51A
SMBJ51CA
MZ
MZ
51
56.7
62.7
1.0
82.4
7.3
1.0
SMBJ54A
SMBJ54CA
NE
NE
54
60.0
66.3
1.0
87.1
6.9
1.0
SMBJ58A
SMBJ58CA
NG
NG
58
64.4
71.2
1.0
93.6
6.4
1.0
SMBJ60A
SMBJ60CA
NK
NK
60
66.7
73.7
1.0
96.8
6.2
1.0
SMBJ64A
SMBJ64CA
NM
NM
64
71.1
78.6
1.0
103
5.8
1.0
SMBJ70A
SMBJ70CA
NP
NP
70
77.8
86.0
1.0
113
5.3
1.0
SMBJ75A
SMBJ75CA
NR
NR
75
83.3
92.1
1.0
121
5.0
1.0
SMBJ78A
SMBJ78CA
NT
NT
78
86.7
95.8
1.0
126
4.8
1.0
SMBJ85A
SMBJ85CA
NV
NV
85
94.4
104
1.0
137
4.4
1.0
SMBJ90A
SMBJ90CA
NX
NX
90
100
111
1.0
146
4.1
1.0
SMBJ100A
SMBJ100CA
NZ
NZ
100
111
123
1.0
162
3.7
1.0
SMBJ110A
SMBJ110CA
PE
PE
110
122
135
1.0
177
3.4
1.0
SMBJ120A
SMBJ120CA
PG
PG
120
133
147
1.0
193
3.1
1.0
SMBJ130A
SMBJ130CA
PK
PK
130
144
159
1.0
209
2.9
1.0
SMBJ150A
SMBJ150CA
PM
PM
150
167
185
1.0
243
2.5
1.0
SMBJ160A
SMBJ160CA
PP
PP
160
178
197
1.0
259
2.3
1.0
SMBJ170A
SMBJ170CA
PR
PR
170
189
209
1.0
275
2.2
1.0
SMBJ180A*
SMBJ180CA*
PT
ET
180
201
222
1.0
292
2.1
1.0
SMBJ200A*
SMBJ200CA*
PV
EV
200
224
247
1.0
324
1.9
1.0
(Volts)
(Amps)
Rev. G/AH
www.taitroncomponents.com
Page 3 of 7
600W Surface Mount Transient Voltage Suppressor
SMBJ5.0A -440CA
Device
Marking
Code
P/N
Stand-Off
Voltage
Breakdown Voltage
@ Test Current
IPPM
V BR
Uni-Polar
Bi-Polar
Uni
Bi
SMBJ220A*
SMBJ220CA*
PX
EX
SMBJ250A*
SMBJ250CA*
PZ
SMBJ300A*
SMBJ300CA*
SMBJ350A*
V WM
Max.
Clamping
[email protected]
IT(mA)
VC (Volts)
Max.
Reverse
Leakage
Current
@ V WM
Max.
Peak
Pulse
Current
IPPM
ID (A)
Min.
Max.
220
246
272
1.0
356
1.7
1.0
EZ
250
279
309
1.0
405
1.5
1.0
QZ
FE
300
335
371
1.0
486
1.3
1.0
SMBJ350CA*
QG
FG
350
391
432
1.0
567
1.1
1.0
SMBJ400A*
SMBJ400CA*
QK
FG
400
447
494
1.0
648
0.9
1.0
SMBJ440A*
SMBJ440CA*
QM
FM
440
492
543
1.0
713
0.9
1.0
(Volts)
(Amps)
Note: 1. For parts with suffix A, the V BR is +/- 5%.
2. For Bi-directional type having VWM of 10V or less, the ID limit is double.
3. Part number with *, don’t get UL approval.
Typical Characteristics Curves
Fig.2- Peak Pulse Power Rating Curve
PPPM OR IPPM (%)
PPPM Peak Pulse Power (KW)
Fig.1- Peak Pulse Power Derating Curve
Ambient Temperature Ta (°C)
Non-repetitive Pulse
Waveform Shown in Fig 3
Mounted on 5mm×5mm
Copper Pads Areas
Pulse Width td
Rev. G/AH
www.taitroncomponents.com
Page 4 of 7
600W Surface Mount Transient Voltage Suppressor
SMBJ5.0A -440CA
Fig.4- Max. Non-Repetitive Forward Surge Current
IPPM Peak Pulse current (%)
IFSM Forward Surge Current (A)
Fig.3- Pulse Waveform
Time t (ms)
Number of Cycles at 60Hz
Fig.6- Capacitance for Bi-direction
CJ Capacitance (pF)
CJ Capacitance (pF)
Fig.5- Capacitance for Uni-direction
Breakdown Voltage (VBR)
Breakdown Voltage (VBR)
Marking Information:
Uni-directional
Bi-directional
Rev. G/AH
www.taitroncomponents.com
Page 5 of 7
600W Surface Mount Transient Voltage Suppressor
SMBJ5.0A -440CA
Dimensions in inches (mm)
SMB
DO-214AA
Ordering Information
SMBJ XX C A – XX – XX
Packing Code
TR70: 7” Tape & Reel, RoHS
RG70: 7” Tape & Reel, RoHS& Halogen Free
Factory Location Code
Tolerance Code
Bi-directional Code
Stand-Off Voltage Code
600W Surface Mount Transient Voltage Suppressor
Rev. G/AH
www.taitroncomponents.com
Page 6 of 7
600W Surface Mount Transient Voltage Suppressor
SMBJ5.0A -440CA
How to contact us
USA HEADQUARTERS
28040 WEST HARRISON PARKWAY, VALENCIA, CA 91355-4162
Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060
Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415
Email: [email protected]
Http://www.taitroncomponents.com
TAITRON COMPONENTS INCORPORATED TAIWAN BRANCH
6F., NO.190, SEC. 2, ZHONGXING RD., XINDIAN DIST., NEW TAIPEI CITY 23146, TAIWAN R.O.C.
Tel: 886-2-2913-6238
Fax: 886-2-2913-6239
TAITRON COMPONENT TECHNOLOG SHANGHAI CORPORATION
SUITE 1503, METROBANK PLAZA, 1160 WEST YAN’AN ROAD, SHANGHAI, 200052, CHINA
Tel: +86-21-5424-9942
Fax: +86-21-2302-5027
Rev. G/AH
www.taitroncomponents.com
Page 7 of 7