1 W High Power LED TPCB-MR4530LS-H11Z-3500 1 W High Power LED Features Small package with high efficiency ESD protection up to 8000V Soldering methods: SMT M4530 Moisture sensitivity level: 1 Reliability testing conforms to IESNA LM80 Lumen maintenance test method Binning parameters: Brightness, forward voltage, wavelength and chromaticity RoHS Compliance Applications General lighting Decorative and entertainment lighting Signal and symbol Luminaries for orientation marker lights (e.g. steps, exit ways, etc.) Exterior and interior automotive illumination Agriculture Lighting Materials Chip Part No. TPCB-MR4530LS-H11Z-3500 Material Emitted Color InGaN Warm White TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Rev. A/CW Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415 Page 1 of 11 1 W High Power LED TPCB-MR4530LS-H11Z-3500 Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Value Unit Max. DC Forward Current IF 600 mA Max. DC Pulse Current (Duty cycle 1/10@1KHz) IPulse 1000 mA Power Dissipation Pd 1 W Max. ESD Resistance VB 8000 V Max. Junction Temperature Tj 125 °C Operating Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Soldering Temperature Tsol 260 °C Thermal Resistance Rth 10 °C/W Allowable Reflow Cycle n/a 2 Cycles Notes: 1. This series LED is not designed for reverse bias used. Electro-Optical Characteristics (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit Brightness (Note 1) Φv 70 ----- ----- Im Forward Voltage (Note 2) VF 2.95 ----- 3.85 V Color Temperature CCT ----- 3500 ----- K Color Rending Index (Note 3) CRI 75 ----- ----- ----- Condition IF =350mA Notes: 1. 2. 3. Luminous flux measurement tolerance: ±10%. Forward Voltage measurement tolerance: ±0.1V. Color Rending Index measurement tolerance: ±2 Rev. A/CW www.taitroncomponents.com Page 2 of 11 1 W High Power LED TPCB-MR4530LS-H11Z-3500 Spectral Distribution Forward Voltage vs. Forward Current Forward Voltage (V) Relative Spectral Power Distribution Typical Electro-Optical Characteristics Curves (Ta=25°C) Forward Current (mA) Wavelength (nm) Current Derating Curve for 350 mA Forward Current (mA) Normalized Luminous Flux Luminous Flux vs. Forward Current Ambient Temperature Ta (°C) Forward Current (mA) Relative Intensity Typical Representative Spatial Radiation Pattern Degree (2θ) Note: 2θ1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value, the tolerance is ±5° Rev. A/CW www.taitroncomponents.com Page 3 of 11 1 W High Power LED TPCB-MR4530LS-H11Z-3500 Package Outline Dimensions (Unit=mm) Note: 1. The tolerances unless mentioned is ±0.15mm, Unit = mm. 2. Do not handle the device by the lens. Incorrect force applied to the lens may lead to failure of devices. 3. Thermal pad is electrically isolated from the Anode and Cathode contact pads. Rev. A/CW www.taitroncomponents.com Page 4 of 11 1 W High Power LED TPCB-MR4530LS-H11Z-3500 Pad Configuration Rev. A/CW www.taitroncomponents.com Page 5 of 11 1 W High Power LED TPCB-MR4530LS-H11Z-3500 Carrier Tape Dimensions (Unit=mm): Loaded quantity 400pcs per reel Note: The tolerances unless mentioned is ±0.1mm. Moisture Resistant Packaging Rev. A/CW www.taitroncomponents.com Page 6 of 11 1 W High Power LED TPCB-MR4530LS-H11Z-3500 Reel Dimensions (Unit=mm): Note: 1. The tolerances unless mentioned is ±0.1mm, Unit = mm. Rev. A/CW www.taitroncomponents.com Page 7 of 11 1 W High Power LED TPCB-MR4530LS-H11Z-3500 Ordering Information TP C B – M R 4530 LS –H 1 1 Z - 3500– 92 –TR70 Lead Free Tape & Reel 7=7” reel 0=400pcs per reel Factory Location Code CCT: 3500K Zener Diodes Code Power Dissipation Code Chip Count Code Heatsink Insulated Lambertain, 120 degrees Size Code in mm Dome Top Warm White Color Bottom Soldering PCB-Chip Bottom Taitron High Power LED Label Explanation CAT: Luminous Flux Rank HUE: Color Bin Rank REF: Forward Voltage Rank Rev. A/CW www.taitroncomponents.com Page 8 of 11 1 W High Power LED TPCB-MR4530LS-H11Z-3500 Rank Combinations Warm White Bin Coordinates Warm White Bin Structure Note: 1. Color coordinates measurement allowance: ±0.01 2. Color bins are defined at IF =350mA. Rev. A/CW www.taitroncomponents.com Page 9 of 11 1 W High Power LED TPCB-MR4530LS-H11Z-3500 Forward Voltage Bins Group C Bin Code Min. Max. V1 2.95 3.25 V2 3.25 3.55 V3 3.55 3.85 Unit Condition V IF=350mA Note: 1. Forward Voltage measurement tolerance: ±0.1V. 2. Forward Voltage bins are defined at IF =350mA. Rev. A/CW www.taitroncomponents.com Page 10 of 11 1 W High Power LED TPCB-MR4530LS-H11Z-3500 How to contact us US HEADQUARTERS 28040 WEST HARRISON PARKWAY, VALENCIA, CA 91355-4162 Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415 Email: [email protected] Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970 MEXICO Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONENTS INCORPORATED TAIWAN, TAIPEI 6F., No.190, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 23146, Taiwan R.O.C. Tel: 886-2-2913-6238 Fax: 886-2-2913-6239 TAITRON COMPONENT TECHNOLOGY, SHANGHAI CORPORATION METROBANK PLAZA,1160 WEST YAN’AN ROAD, SUITE 1503, SHANGHAI,200052, CHINA Tel: +86-21-5424-9942 Fax: +86-21-2302-5027 CROSS REGION PLAZA, 899 LINGLING ROAD, SUITE 18C, SHANGHAI, 200030, CHINA Tel: +86-21-5424-9942 Fax: +86-21-5424-9931 Rev. A/CW www.taitroncomponents.com Page 11 of 11