Product Benefits - Winchester Electronics

Winchester Electronics Presents...
KINGS® Brand Product
Broadcast Solutions
Headquarters
Winchester Electronics Corporation
62 Barnes Industrial Road North
Wallingford, CT 06492
203-741-5400
July 2011
www.winchesterelectronics.com
Winchester Electronics Presents...
EL Series Optical Fiber Video Jack
Winner of prestigious awards
Product Benefits
Patents Pending
Full Normal/Self Normalizing
Expanded Light beam connection scheme front and rear eliminates
issues with dirt and scratches common with single-mode and multimode fiber connections.
Small form factor allows easy integration into existing patch bays, up to
32 per jackfield.
Fiber connection is “signal agnostic” allowing video, data, audio,
internet protocol, analog, or any other signal to be transmitted.
Rear DIN 1.0/2.3 style mechanical latching for security of Normal path.
Mechanical optical switch requires no power and is designed for 10,000
mate/unmate cycles.
Fully coated optics for low loss connections.
July 2011
www.winchesterelectronics.com
Specifications
OPTICAL CONNECTION DIAGRAM
Material
Body
Mechanical
High Strength Stainless Steel
NORMAL
SIDE
Patch Cord Mates
10,000 Cycles
Withdrawal Force (Patch Cord) 5 lbs. Minimum
Pull Force (Rear Side)
20 lbs. Minimum
PATCH
SIDE
NORMAL THRU CONNECTION
NO PATCHCORD INSERTED
Optical
1.5 dB Typical
1.5 dB Maximum
55 dB Typical 45 dB Maximum
Insertion Loss Normal
Insertion Loss Patched
Return Loss
NORMAL
SIDE
PATCH
SIDE
PATCHED CONNECTION
EITHER PATCH CORD INSERTED
Patents Pending
Dimension Drawings
1.350 34.29
.125 3.18
.370
.400 10.16
.400 10.16
.400 10.16
.161 4.09
Part Number: 776G-776-00001N
Description
Part Number
EL DIN™ Fiber Optic Removal Tool
107-1505
EL Series™ Optical Jack Assembly
776G-776-00001N
EL Series™ Optical Jack Assembly Normal
776G-009-00701N
EL Series™ Optical Single Jack Assembly
776G-776-00002N
EL Series™ Jackfield 32 Position-Normal
7767-776-00005N
EL Series™ Jackfield 32 Position-Normal w/16 Positions
7767-776-00006N
EL Series™ Jackfield 32 Position-Non Normal
7769-776-00001Z
EL Series™ Optical Jack Non-Normal
7769-776-00002Z
EL Series™ Jackfield 24 Position-Normal
7769-776-00003Z
EL Series™ Jackfield 32 Position-Non Normal w/8 Positions
7769-776-00004Z
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
EL Series Optical Fiber Patch Cords
The Expanded Light DIN connect patch cord is similar in function to the traditional BNC to
BNC installed copper wiring terminated to the rear of a copper jackfield. This patch cord
has an EL-DIN connector on one end and an industry standard LC, SC, FC, ST, (or any
single or multi-mode) fiber connector on the other end. The EL-DIN connector
end is attached to the rear of the EL-Video Jack and the Kevlar
reinforced fiber is routed to the termination point at the
router, or traditional fiber distribution frame.
The Expanded Light Quick Connect (EL-QC) is similar in function to a copper video patch
cord. With the EL-QC connector on either end of a 5mm bend-insensitive rugged fiber,
when inserted into the front of the EL Optical Fiber Video Jack, it will automatically
switch the optical signal being routed through the back of the video jack
to the front connectors.
Patents Pending
Product Benefits
Expanded Light beam connection scheme eliminates issues with dirt and scratches
common with single-mode and multi-mode fiber connections.
Non contact optical connection eliminates deterioration of insertion and return loss
over matings; no cleaning required.
Rugged cable jacket offers same physical usage characteristics as copper.
Kevlar reinforcement provides high pull strength.
Bend-insensitive fiber allows for small bend radius without any increased insertion
loss.
Fiber connection is “signal agnostic” allowing video, data, audio, internet protocol,
analog, or any other signal to be transmitted.
Front push/pull connection allows easy insertion and withdrawal.
Components made of high-strength stainless steel.
Coated optics for low loss connections.
July 2011
www.winchesterelectronics.com
Material
Mechanical
Optical
Body
Patch Cord Mates
Insertion Loss Normal
High Strength Stainless Steel
10,000 Cycles
1.5 dB Typical
Optical Alignment Pin
Withdrawal Force (Patch Cord) Insertion Loss Patched
High Strength Stainless Steel
5 lbs. Minimum
1.5 dB Typical
Pull Force (Rear Side)
Return Loss
20 lbs. Minimum
55 dB Typical 45 dB Minimum
Patents Pending
Description
Part Number
EL DIN™ Removal Tool
107-1505
EL Series™ Bare Fiber Cable Assembly Pigtail
776R-716-394014
EL Series™ DIN-SC Fiber Optic Cable Assembly (3M)
776L-700-118014
EL Series™ DIN-LC Fiber Optic Cable Assembly (3M)
776L-704-118014
EL Series™ DIN-FC SM Fiber Optic Cable Assembly (3M)
776L-710-118014
EL Series™ DIN-ST Fiber Optic Cable Assembly (3M)
776L-712-118014
Singlemode EL to EL Patch Cable w/5mm 9 / 125 Blue Cable (3M)
776L-776-118016
Note: Any length available - please contact sales for assistance.
The Expanded Light Patch Cords provide a new way to route broadcast signals over optical
fiber.
Eliminating issues associated with single mode ferrule-based connections, the EL Patch
Cords, combined with the EL Optical Fiber Video Jack (EL-VJ), provide a rugged and
reliable way to carry, monitor, and route your high-speed signals. Totally signal agnostic,
the fiber video jack is equally adept at carrying HDTV, SDI, Ethernet IP, Analog Video,
or any other data format, at whatever data rate your transmit/receive system can
deliver. With a workflow carried directly from the proven copper
jackfield and patch cord routing methodology, the Expanded Light
system is totally passive, and provides a single-mode
expanded beam connector system with
excellent reliability and optical performance.
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
Fiber Optic Tri-Loc® Camera Connector
The rugged stainless steel outer shell ensures a very long
product life. When properly cleaned, the ceramic
fiber optic contacts will last for thousands of
mating cycles. The optical contacts are easily
accessible by removing the unique alignment sleeve
cartridge from the front of the connector for fast
cleaning. The available cleaning kit and inspection
tools help the user view the condition of the fiber optic
contact and maintain cleanliness to ensure reliable operation.
Also newly available are the optional pre-terminated fiber optic contacts to provide the user a
contact that can be terminated without polishing. It is intended for use in situations where it is critical that a
cable be repaired quickly. They may be used indoors, in fixed installation environments, or in the field and
will provide optical performance and reliability equal to that of a factory-polished connector. These are also
ideal for the customer who wishes to make their own cables without the investment of time and money for the
equipment or polishing process.
Product Benefits:
Fewer components when compared to similar products currently on the market.
Quick Disconnect Push/Pull self-latching system.
ARIB (BTA S-1005B), ANSI/SMPTE (304-2009 & 311-2009),
and EBU (R100-1999) compatible.
Stainless steel shell for rugged and harsh environment.
Optional pre-polished contacts for dependable
fusion splicing.
Crimp or solder electrical contacts.
UL Certified
Specifications:
Optical
Electrical
Auxiliary Electrical Contacts
Voltage600 Volts AC
Current
10 A
Low-Voltage
Voltage
Current
Contacts
42 V AC or 60 V DC
1A
Environmental
Wavelength
1250 nm - 1625 nm
Operating
Temperature Rating
-20°C to +60°C
Insertion Loss
Storage
-40°C to +75°C
0.5 dB Max, 0.3 dB Typical
Return Loss
> -45 dB, -50 dB Typical
Humidity
<95% RH (at +40°C)
July 2011
www.winchesterelectronics.com
Winchester Electronics has partnered with the global leader in fusion splicing technology, AFL Telecommunications, to
design a customized Fujikura fusion splicer for our Fiber Optic Tri-Loc® Camera Connectors. This partnership provides
Winchester customers the best performance and value in the industry. Please contact Winchester Electronics for more
information.
Optional pre-polished, pre-terminated Fiber
Optic Contacts for dependable fusion splicing
Contacts easily accessible for fast cleaning by removing the
unique alignment sleeve cartridge from the front of the
connector with the available removal tool
Optional ruggedized dust caps
and jackets available
Connectors
Part #
Protective Boots
Part #
Fiber Optic Tri-Loc Jack
7763-3-3
Fiber Optic Tri-Loc Jack Boot and Cap Kit
7760-000-00705Z
Fiber Optic Tri-Loc® Plug
7765-3-3
Fiber Optic Tri-Loc® Plug Boot and Cap Kit
7760-000-00704Z
Fiber Optic Tri-Loc Jack w/ Pre-Polished Splice on Termini
7763-4-3
Fiber Optic Tri-Loc Jack Cap Kit
7760-000-00707Z
Fiber Optic Tri-Loc® Plug w/ Pre-Polished Splice on Termini
7765-4-3
Fiber Optic Tri-Loc® Plug Cap Kit
7760-000-00706Z
®
®
®
®
Contact Repair Kits
Part #
Fiber Optic Tri-Loc Jack Repair Kit
7760-000-00702Z
Fiber Optic Tri-Loc® Plug Repair Kit
7760-000-00701Z
Fiber Optic Tri-Loc® Jack Repair Kit w/ Pre-Polished Splice on Termini
7760-000-00709Z
Fiber Optic Tri-Loc Plug Repair Kit w/ Pre-Polished Splice on Termini
7760-000-00708Z
Fiber Optic Tri-Loc® Plug Repair Kit w/ Cartridge
7760-000-00703Z
Fiber Tri-Loc Pre-Polished Splice-On Termini
7760-000-00711Z
®
®
®
Tools
Part #
Tool Frame (Ergonomic)
KTH-5000
Die Set .068 / .384 for KTH-5000 Tool Frame
KTH-5018
Tool Frame (Large Bench)
KTH-1000
Die Set .068 / .384 for KTH-1000 Tool Frame
KTH-2035
Fiber Optic Tri-Loc Universal Contact Removal Tool (all contacts)
KTH-2310
Fiber Optic Tri-Loc® Universal Contact Removal Tool w/ Swabs & Loaded Housings
KTH-2317
Fiber Optic Tri-Loc® Double Ended Contact Removal Tool (Same as KTH-2310)
w/ Lemo® Removal End
KTH-2324
®
Cable assembly procedure available - please contact customer service.
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
Fiber Optic Tri-Loc® Accessories
Boots/Lanyards
Qty/Pkg
Part Number
Description
1
7760-000-00704Z
Fiber Optic Tri-Loc® Boot SMPTE 304, Plug (7765-3-3, 7765-4-3)
1
7760-000-00705Z
Fiber Optic Tri-Loc® Boot SMPTE 304, Jack (7763-3-3, 7763-4-3)
1
7760-000-00706Z
Fiber Optic Tri-Loc® Lanyard Kit SMPTE 304, Plug (7765-3-3, 7765-4-3)
1
7760-000-00707Z
Fiber Optic Tri-Loc® Lanyard Kit SMPTE 304, Jack (7763-3-3, 7763-4-3)
Plug Repair Kit
Qty/Pkg
Part Number
Description
Fiber Optic Tri-Loc Plug (7765-3-3, 7765-4-3) Repair Kit - Includes Components
1
7760-000-00701Z
Qty/Pkg
Part Number
Description - Component Only
1*
1-8156
Crimp Sleeve (Cable Shield Ferrule)
®
1*
78-0705
Rear O-Ring
1
78-1019
Shield Ground
2*
78-4006
Plug Female Crimp Contact
2*
78-4005
Plug Male Crimp Contact
2*
78-7016
Termini for Manual Polish w/ Protective Cap
Plug Repair Kit with Cartridge
Qty/Pkg
Part Number
Description
1
7760-000-00703Z
Fiber Optic Tri-Loc® Plug (7765-3-3, 7765-4-3) Repair Kit w/Cartridge - Includes Components
Qty/Pkg
Part Number
Description - Component Only
1*
1-8156
Crimp Sleeve (Cable Shield Ferrule)
1*
78-0705
Rear O-Ring
1
78-1019
Shield Ground
2*
78-4006
Plug Female Crimp Contact
2*
78-4005
Plug Male Crimp Contact
2*
78-7016
Termini for Manual Polish w/ Protective Cap
1*
78-7003
Plug Cartridge Assembly
Plug Repair Kit with Pre-Polished Splice-On
Qty/Pkg
Part Number
Description
1
7760-000-00708Z
FO Tri-Loc® Plug (7765-3-3, 7765-4-3) Repair Kit w/Pre-Polish Splice-On-Includes Components
Qty/Pkg
Part Number
Description - Component Only
2*
78-0429
Pre-Polished Termini w/ Protective Cap
2*
VNFPS01-900-34
Splice Protection Sleeve 34mm
1
78-1019
Shield Ground
1*
1-8156
Crimp Sleeve (Cable Shield Ferrule)
1*
78-0705
Rear O-Ring
2*
78-4006
Plug Female Crimp Contact
2*
78-4005
Plug Male Crimp Contact
2*
78-7016
Termini for Manual Polish w/ Protective Cap
1*
78-7003
Plug Cartridge Assembly
July 2011
www.winchesterelectronics.com
Jack Repair Kit
Qty/Pkg
Part Number
Description
1
7760-000-00702Z
Fiber Optic Tri-Loc® Jack (7763-3-3, 7763-4-3) Repair Kit - Includes Components
Qty/Pkg
Part Number
Description - Component Only
1*
1-8156
Crimp Sleeve (Cable Shield Ferrule)
1*
78-0705
Rear O-Ring
1
78-1019
Shield Ground
2*
78-4203
Jack Female Crimp Contact
2*
78-4204
Jack Male Crimp Contact
2*
78-7016
Termini for Manual Polish w/ Protective Cap
Jack Repair Kit with Pre-Polished Splice-On
Qty/Pkg
Part Number
Description
1
7760-000-00709Z
FO Tri-Loc® Jack (7763-3-3, 7763-4-3) Repair Kit w/Pre-Polish Splice-On - Includes Components
Qty/Pkg
Part Number
Description - Component Only
2*
78-0429
Pre-Polished Termini w/ Protective Cap
2*
VNFPS01-900-34
Splice Protection Sleeve 34mm
1
78-1019
Shield Ground
1*
1-8156
Crimp Sleeve (Cable Shield Ferrule)
1*
78-0705
Rear O-Ring
2*
78-4203
Jack Female Crimp Contact
2*
78-4204
Jack Male Crimp Contact
2*
78-7016
Termini for Manual Polish w/ Protective Cap
1*
78-7003
Plug Cartridge Assembly
Pre-Polished Splice-On Termini
Qty/Pkg
Part Number
Description
1
7760-000-007011Z
Fiber Optic Tri-Loc® Pre-Polished Splice-On Termini - Includes Components
Qty/Pkg
Part Number
Description - Component Only
2*
VNFPS01-900-34
Splice Protection Sleeve 34mm
Tools/Dies
Qty/Pkg
Part Number
Description
1
KTH-2310
Fiber Optic Tri-Loc® Universal Insert Removal Tool (All Contacts)
1
KTH-2317
Fiber Optic Tri-Loc® Universal Insert Removal Tool (Same as KTH-2310) w/ Swabs and Loaded Housings
1
KTH-2324
Fiber Optic Tri-Loc® Double-Ended Insert Removal Tool (Same as KTH-2310) w/ LEMO® Removal End
1
KTH-5000
Tool Frame (Ergonomic)
1
KTH-5018
Die Set .068/.384 for KTH-5000 Tool Frame
1
KTH-1000
Tool Frame (Large Bench)
1
KTH-2035
Die Set .068/.384 for KTH-1000 Tool Frame
*Bulk Packs Available
Qty
Part Number
Description
Qty
Part Number
Description
Qty
Part Number
Description
25
1-8156U
Crimp Sleeve (Cable Shield Ferrule)
25
78-3010U
Jack Insulator Half Side "A"
50
78-4203U
Jack Female Crimp Contact
Jack Male Crimp Contact
10
78-0102U
4-40 Hex Set Screw
25
78-3011U
Jack Insulator Half Side "B"
50
78-4204U
25
78-0301U
Washer for Rear Cable Seal
25
78-3012U
Plug Insulator Half Side "B"
10
78-7003U
Plug Cartridge Assembly
25
78-0701U
Rear Cable Seal
25
78-3013U
Plug Insulator Half Side "A"
10
78-7016U
Termini for Manual Polish w/ Prot Cap
25
78-0705U
Rear O-Ring
50
78-4005U
Plug Male Crimp Contact
50
VNFPS01-900-34U
Splice Protection Sleeve 34mm
10
78-1012U
Strength Member Support Clamp
50
78-4006U
Plug Female Crimp Contact
25
VNSC-748U
Jack Cap, Round LDPE, Red 002, .906" ID
25
VNSC-3-4U
Plug Cap, Round LDPE, Red 002, .750” ID
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
Customized Fujikura Fusion Splicer
Winchester Electronics has partnered
with the global leader in fusion splicing
technology, AFL Telecommunications, to
design a customized Winchester KINGS®
Brand, Fujikura fusion splicer for our HDTV
Fiber Optic Tri-Loc® Camera Connectors and
EL-Series™ Video Patching System. This
partnership provides Winchester customers
with the best performance and value in the
industry.
Our fixed V-groove and core alignment
models incorporate a user-friendly interface
with enhanced features to provide the most rugged and reliable fusion splicers in the market
today. The new rugged construction adds improved reliability by resisting shock, dust, and
rain, and can withstand a 30” drop test.
Product Benefits:
Dual purpose design enables quick and easy conversion between standard
single fiber fusion splicing and Winchester’s fiber splicing needs.
Rugged construction providing shock, dust, and moisture resistance.
Dual monitor position with automatic image orientation.
Automatic arc calibration and fiber identification.
User-selectable fiber clamping method - sheath clamp or fiber holders.
Rugged SMPTE 311 cable holder for ease of use during splicing in the field.
Auto-start tube heater feature.
Color LCD display with anti-reflective coating for excellent visibility in bright
sunlight.
Simultaneous battery charge and splicer operation.
Long battery life (up to 160 splice/heat cycles per charge).
Detachable work table incorporated into the transit case.
Data and video download software included; software upgrade available via
the internet.
Green friendly - RoHS & WEEE compliant.
July 2011
www.winchesterelectronics.com
Parts and Accessories
Fusion Splicer Kit with Winchester KINGS® Fiber Optic Tri-Loc® Modification (with cleaver)
Includes: CT30A Cleaver, ADC-13 AC Adapter, ACC-14 AC Cord, Spare Electrodes (pair),Sheath Clamp, USB Cable,
Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual, JP-05 Splice Sleeve Cooling Tray, and
Transit Case with Carrying Strap
Fusion Splicer Kit with Winchester KINGS® Fiber Optic Tri-Loc® Modification (with cleaver, battery and cord)
Includes: BTR-08 Battery, DCC-14 Battery Charge Cord, CT30A Cleaver, ADC-13 AC Adapter, ACC-14 AC Cord,
Spare Electrodes (pair), Sheath Clamp, USB Cable, Splicer Carrying Strap, Quick Reference Guide, Video Instruction
Manual, JP-05 Splice Sleeve Cooling Tray, and Transit Case with Carrying Strap
Accessories for FSM-18S/60S
FSM-18S
V-Groove
FSM-60S
Core Alignment
KTH-2315
KTH-2328
KTH-2330
KTH-2329
Part Number
Cable Clamp for Fiber Optic Tri-Loc® Cable
KTH-2331
Fiber Holder for Fiber Optic Tri-Loc Cable
KTH-2332
Fiber Holder for Fiber Optic Tri-Loc® Termini
KTH-2333
®
Fiber Optic Tri-Loc Modification Upgrade for Standard FSM-60S/18S
KTH-2334
Fiber Holder for EL Series™ DIN Terminal
KTH-2335
CT-30A Cleaver (SO14080) Single Fibers: 250-900µm coating, 125µm cladding
KTH-2340
Fiber Optic Tri-Loc CT-30A Cleaver Base / Use with Cable Clamp
KTH-2341
®
®
Specifications
Model
FSM-18S
FSM-60S
Cladding Diameter
125μm
100μm to 1,000μm
Typical Average Splice Loss
0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB
with NZDS, measured by cut-back method relevant to ITU-T
and IEC standards
0.02dB with SM, 0.01dB with M , 0.04dB with DS,
0.04dB with NZDS. Measured by cut-back method
relevant to ITU-T and IEC standards
Splicing Time
Typical 11 seconds with standard single-mode fiber
Typical 9 seconds with standard single-mode fiber
Splice Loss Estimate
Based upon dual camera cladding axis alignment data
Based upon dual camera core alignment data
Operating Condition
0 to 3,660m above sea level, 0 to 95% RH, -10 to 50°C
respectively
0 to 5,000m above sea level, 0 to 95%RH and -10 to
50°C respectively
Splice/Heat Cycles w/ Battery
Typical 150 cycles with power save functions activated
Typical 160 cycles with power save functions activated
Weight
2.1 kg (4.6 lbs) with AC adapter ADC-11; 2.5kg (5.5 lbs) with
BTR-08 battery
2.3 kg (5.1 lbs) with AC adapter ADC-11; 2.7kg (5.9 lbs)
with BTR-08 battery
Applicable Fibers
Single-mode (ITU-T G.652), multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
Coating Diameter
100μm to 1000μm
Fiber Cleave Length
8 to 16mm with 250μm coating diameter, 16mm with 900μm coating diameter
Arc Calibration Method
Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available
Splicing Modes
100 preset and user programmable modes
Storage of Splice Result
Last 2000 results to be stored in the internal memory
Fiber Display
X or Y, or both X and Y simultaneously; front or rear monitor display options with automated image orientation
Magnification
300X for single X or Y view, or 187X for X and Y view
Viewing Method
Dual cameras with 4.1 inch TFT color LCD monitor with anti-reflective coating
Mechanical Proof Test
1.96 to 2.25N
Tube Heater
Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time
Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length
60mm, 40mm, micro
Power Supply
Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-1, 13.2V DC with BTR-08 battery
Terminals
USB 1.1 (USB-B type) for PC communication, Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection
Maximum wind velocity of 15m/s. (34 mph)
Dimensions
136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
AFL FuseConnect™ Connectors
Winchester Electronics has partnered with the global leader in fusion splicing
technology, AFL Telecommunications, to offer FuseConnect™ fusion-spliced, field
terminated connectors that are uniquely designed and feature just
four components.
Our customized Fujikura fusion splicer is utilized to
terminate the connectors in the field and these connectors are
also compatible with other fiber holder-based fusion splicing
platforms currently available.
FuseConnect™ connectors have an innovative four-component structure which
eliminates the complexity of additional crimp ring parts, virtually eliminating the crimping
operation.
Product Benefits:
Field installable
Only four components
No adhesives, crimping, or polishing
True APC performance
MM compliant to TIA/EIA568C.3
Compatible with most fusion splicers
FuseConnect™ in Fusion Splicer
Applications:
Connectorization in:
-Broadcast distribution
-RF-overlay FTTP networks
-Cable TV backbone networks
-Outside plant
-FTTDesk
-MDU FTTP Cabling
Central office connector replacement
Data center installation
July 2011
www.winchesterelectronics.com
Parts and Accessories
Part Number - 7005 Series
Fiber Optic - SC - Singlemode
7005-000-00701Z
SC UPC non-angled singlemode FuseConnect™ - 3mm, Blue
7005-000-00702Z
SC APC angled singlemode FuseConnect™ - 3mm, Green
7005-000-00703Z
SC UPC non-angled singlemode FuseConnect™ - 2mm, Blue
7005-000-00704Z
SC APC angled singlemode FuseConnect™ - 2mm, Green
7005-000-00705Z
SC UPC non-angled singlemode FuseConnect™ - 900µm, Blue
7005-000-00706Z
SC APC angled singlemode FuseConnect™ - 900µm, Green
Part Number - 7025 Series
Fiber Optic - SC - Multimode
7025-000-00701Z
SC PC 62.5µm multimode FuseConnect™ - 3mm, Beige
7025-000-00702Z
SC PC 50µm multimode FuseConnect™ - 3mm, Black
7025-000-00703Z
SC PC 50µm 10G multimode FuseConnect™ - 3mm, Aqua
7025-000-00704Z
SC PC 62.5µm multimode FuseConnect™ - 2mm, Beige
7025-000-00705Z
SC PC 50µm multimode FuseConnect™ - 2mm, Black
7025-000-00706Z
SC PC 50µm 10G multimode FuseConnect™ - 2mm, Aqua
7025-000-00707Z
SC PC 62.5µm multimode FuseConnect™ - 900µm, Beige
7025-000-00708Z
SC PC 50µm multimode FuseConnect™ - 900µm, Black
7025-000-00709Z
SC PC 50µm 10G multimode FuseConnect™ - 900µm, Aqua
Part Number - 7045 Series
Fiber Optic - LC - Singlemode
7045-000-00701Z
LC UPC non-angled singlemode FuseConnect™ - 2mm, Blue
7045-000-00702Z
LC UPC non-angled singlemode FuseConnect™ - 900µm, Blue
Part Number - 7065 Series
Fiber Optic - LC - Multimode
7065-000-00701Z
LC PC 62.5µm multimode FuseConnect™ - 2mm, Beige
7065-000-00702Z
LC PC 50µm multimode FuseConnect™ - 2mm, Black
7065-000-00703Z
LC PC 50µm 10G multimode FuseConnect™ - 2mm, Aqua
7065-000-00704Z
LC PC 62.5µm multimode FuseConnect™ - 900µm, Beige
7065-000-00705Z
LC PC 50µm multimode FuseConnect™ - 900µm, Black
7065-000-00706Z
LC PC 50µm 10G multimode FuseConnect™ - 900µm, Aqua
Part Number - KTH Series
FuseConnect™ Installation Kits for:
KTH-2336
FSM-17S-FH, FSM-17R, FSM-18S, FSM-18R, FSM-50R12, FSM-60S, FSM-60R12
Specifications
Parameter
Value
Connector Type
SC [TIA/EIA-604-3 (FOCIS 3)] / LC [TIA/EIA-604-10A (FOCIS 10)]
Cable Type
900µm, 2mm, 3mm
Polish
APC, UPC, PC
Insertion Loss
SM: 0.15dB (average), 0.3dB (maximum) / MM: 0.10dB (average), 0.3dB (maximum)
Return Loss
SM = > 65dB (APC), >55dB (UPC) / MM - > 30dB (PC)
Operating Temperature
-40°C to +75°C
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
Standard Size Video Jacks
7520 & 7780 Series
Analog or Digital, SD or HD Compliant
Product Benefits
Meets SMPTE 424M (3G - SDI) and HDTV standards
Frequency range: up to 3.5 GHz
Mates with standard BNC plugs and standard (0.090” center pin)
patch plugs
75 Ohm - suitable for Analog, Serial Digital, and HDTV applications
Terminated, unterminated, and feed-through versions available in
dual or single configurations
Specifications
Electrical
Environmental
Impedance
75 Ohms
Frequency Range
Dual Jacks: DC to 3.5 GHz
Single Jacks:DC to 1.5 GHz
Return Loss
Dual Jacks: -15 dB up to 2.4 GHz
-10 dB up to 3.5 GHz
Single Jacks:-15 dB up to 900 MHz
(self-terminated) -10 dB up to 1.5 GHz
Material
Mechanical
Life
Withdrawal Force
50,000 Cycles
3.0 lbs. Minimum
BodyNickel
ContactsGold
Dual Video
Jack (Std
Size)
Dual
Video
Jack
(Normal Through Mode)
Return Return
LossLoss
(Normal
Through Mode)
Dual Video Jack (Std Size)
Dual Video Jack
Return Loss (Feed Through Mode)
Return Loss (Feed Through Mode)
0
-5
-5
SMPTE 424M
-10
SMPTE 424M
-10
-15
-15
-20
-20
S11 (dB)
S11 (dB)
-40°C to +85°C
MIL-STD-202, Method 106
MIL-STD-202, Method 101
Condition B
Finishes
Body
Zinc Alloy
Contacts
Beryllium Copper or Brass
Springs
Beryllium Copper
Insulators
Teflon® or Delrin®
DielectricsZytel®
0
Temperature Range
Moisture Resistance
Corrosion
-25
-30
-25
-30
-35
-35
-40
-40
-45
-45
-50
-50
0
0.5
1
1.5
2
Frequency (GHz)
2.5
3
3.5
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
July 2011
www.winchesterelectronics.com
7520 & 7780 Series Standard Size Video Jacks
Video Jack
P/N
Description
7520-9 Single, Unterminated
7520-10 Single, Terminated
7780-2 Dual, Terminated
7780-3 Dual, Unterminated
7780-4 Dual, Feed Through
7780-5 Dual, Terminated, Threaded Flange
7780-6 Dual, Unterminated, Threaded Flange
7780-7 Dual, Feed Through, Threaded Flange
A
2.540
2.540
2.650
2.650
2.650
2.650
2.650
2.650
Dimensions
B
0.820
0.820
0.560
0.560
0.560
0.560
0.560
0.560
C
1.380
1.380
1.380
1.380
1.380
Dimension Drawings - Single and Dual
Single
Dual
P/N
7785-6
7785-29
7785-7
7785-31
7785-41
Video Jackfield
Configuration
P/N
1x24 Terminated
7785-40
1x24 Unterminated
7785-8
1x26 Terminated
7785-32
1x26 Unterminated
7785-4
1.5x24 Terminated
7785-30
Configuration
1.5x28 Terminated
2x24 Terminated
2x24 Unterminated
2x26 Terminated
2x26 Unterminated
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
8845 Series Patch Cords
Standard Size
Patch Cord
Cable Assembly
Product Benefits:
Pre-assembled for quick and easy installation
10 popular colors for visual signal identification or other personalization
Matching protective boots also included
Each assembly contains two KINGS® Standard Size 75 Ohm patch
plugs (7510-16)
Terminated to Belden 1694A or equivalent cable in a variety of lengths
July 2011
www.winchesterelectronics.com
Part Number
K-8845-012-YY
K-8845-018-YY
K-8845-024-YY
K-8845-036-YY
K-8845-048-YY
K-8845-060-YY
K-8845-072-YY
K-8845-084-YY
K-8845-096-YY
K-8845-120-YY
DIM A + 1.25
12.00
18.00
24.00
36.00
48.00
60.00
72.00
84.00
96.00
120.00
YY
-01
-02
-03
-04
-05
-06
-07
-08
-09
-10
COLOR
BROWN
RED
ORANGE
YELLOW
GREEN
BLUE
VIOLET
GREY
WHITE
BLACK
K-8845-XXX-YY
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
7785 Series Dual Video Jackfields
Standard Size
Analog or Digital
SD or HD Compliant
Product Benefits
75 Ohm performance suitable for
Analog, Serial Digital, and HDTV
Dual Video Jacks mounted to
standard 19” panels
Mates with standard-sized patch
plugs (0.37” diameter, 0.090” center
pins)
Terminated & Unterminated versions
available
50,000 cycles minimum
Specifications
Material
Panel
Labels
Part Number
Smooth Black Phenolic
Designation Strip with Clear Plastic Cover
Configuration
7785-6
1x24 terminated
7785-29
1x24 non terminated
7785-7
1x26 terminated
7785-31
1x26 non terminated
P/N 7785-6
P/N 7785-29
1 RU high Video Jackfield includes 24 Video Jacks, P/N 7780-2, terminated
P/N 7785-7
P/N 7785-31
1 RU high Video Jackfield includes 26 Video Jacks, P/N 7780-2, terminated
1 RU high Video Jackfield includes 24 Video Jacks, P/N 7780-3, non terminated
1 RU high Video Jackfield includes 26 Video Jacks, P/N 7780-3, non terminated
July 2011
www.winchesterelectronics.com
7785 Series Dual Video Jackfields
Part Number
Configuration
7785-41
1.5x24 terminated
7785-40
1.5x28 terminated
7785-8
2x24 terminated
7785-32
2x24 non terminated
7785-4
2x26 terminated
7785-30
2x26 non terminated
P/N 7785-41
P/N 7785-40 1.5 RU high Video Jackfield includes 24 Video Jacks, P/N 7780-2, terminated
P/N 7785-8
P/N 7785-32
2 RU high Video Jackfield includes 24 Video Jacks, P/N 7780-2, terminated
P/N 7785-4
P/N 7785-30
1.5 RU high Video Jackfield includes 28 Video Jacks, P/N 7780-2, terminated
2 RU high Video Jackfield includes 24 Video Jacks, P/N 7780-3, non-terminated
2 RU high Video Jackfield includes 26 Video Jacks, P/N 7780-2, terminated
2 RU high Video Jackfield includes 26 Video Jacks, P/N 7780-3, non-terminated
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
Mid-Size Video Jacks
7772 & 7790 Series
Analog or Digital, SD or HD Compliant
Product Benefits
Meets SMPTE 424M (3G-SDI) and HDTV standards
Offers higher panel density and increased frequency range
Mates with standard BNC plugs and mid-size (0.050” center pin)
patch plugs
75 Ohm - suitable for Analog, Serial Digital, and HDTV applications
Terminated, unterminated, and feed-through versions available in
dual or single configurations
Specifications
Electrical
Environmental
Impedance
75 Ohms
Frequency Range
Dual Jacks: DC to 4.1 GHz
Single Jacks:DC to 3.0 GHz
Return Loss
Dual Jacks: -20 dB up to 2.4 GHz
-10 dB up to 4.1 GHz
Single Jacks:-20 dB up to 1.5 GHz
(self-terminated) -10 dB up to 3.0 GHz
Temperature Range
Moisture Resistance
Corrosion
Mechanical
Material
Finishes
BodyNickel
ContactsGold
Dual Video Jack
Dual Video Jack (Mid Size)
Return Loss
Through
Return(Normal
Loss (Normal
ThroughMode)
Mode)
0
0
-5
SMPTE 424M
SMPTE 424M
-10
-15
-15
-20
-20
S11 (dB)
S11 (dB)
Single Video Jack
Single Video Jack (Mid Size)
Return(Self-terminated
Loss (Self-Terminated andand
Feed-Through
Modes)
Return Loss
Feed-through
Modes)
-5
-10
30,000+ Cycles
2.0 lbs. minimum
Life
Withdrawal Force
Body
Brass or Zinc Alloy
Contacts
Beryllium Copper
Springs
Beryllium Copper
Insulators
Teflon®
DielectricsTopas®
-40°C to +85°C
MIL-STD-202, Method 106
MIL-STD-202, Method 101
-25
-30
Feed-Through
-30
-35
-35
-40
-40
-45
-45
-50
Self-Terminated
-25
-50
0
0.5
1
1.5
2
2.5
Frequency (GHz)
3
3.5
4
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
July 2011
www.winchesterelectronics.com
7772 & 7790 Series Mid-Size Video Jacks
P/N
7772-1
7772-2
7772-3
7772-4
7790-2
7790-3
7790-4
Video Jack
Description
Single, Unterminated, Short
Single, Unterminated, Long
Single, Terminated, Short
Single, Terminated, Long
Dual Normal Terminated
Dual Normal Unterminated
Dual Feed Thru Mode
A
2.060
3.389
2.060
3.389
3.375
3.375
3.375
Dimensions
B
0.665
0.665
0.359
0.359
0.285
0.285
0.285
C
0.665
0.665
0.081
0.081
0.081
Dimension Drawings - Single and Dual
Single
Dual
Video Jackfield
P/N
Configuration
7795-1
1x24 Term
7795-11
1x30 Term
7795-12
1x32 Term
7795-13
1x34 Term
7795-14
1.5x32 Term
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
8846 Series Patch Cords
Mid Size
Patch Cord
Cable Assembly
Product Benefits:
Pre-assembled for quick and easy installation
10 popular colors for visual signal identification or other personalization
Matching protective boots also included
Each assembly contains two KINGS® Mid-size 75 Ohm patch
plugs (7410-10)
Terminated to Belden 1855A or equivalent cable in a variety of lengths
July 2011
www.winchesterelectronics.com
Part Number
K-8846-012-YY
K-8846-024-YY
K-8846-036-YY
K-8846-048-YY
K-8846-060-YY
K-8846-072-YY
K-8846-096-YY
K-8846-120-YY
K-8846-144-YY
K-8846-288-YY
DIM A + 1.25
12.00
24.00
36.00
48.00
60.00
72.00
96.00
120.00
144.00
288.00
YY
-01
-02
-03
-04
-05
-06
-07
-08
-09
-10
COLOR
BROWN
RED
ORANGE
YELLOW
GREEN
BLUE
VIOLET
GREY
WHITE
BLACK
K-8846-XXX-YY
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
7795 Series Video Jackfields
Mid-Size
Analog or Digital
SD or HD Compliant
Mates with .300 inch diameter
Mid-Size Patch Plugs
Specifications:
High Density: Up to 34 Jacks 1 and 1.5 rack unit high panels
High Frequency: Usable from Analog, Serial Digital, and HDTV
Impedance: 75 Ohms nominal
Panel Material: Black phenolic with smooth black finish on outside face
Designation Strip: Designation strip and clear plastic cover
Product Benefits:
Designed to significantly exceed SMPTE 424M requirements
Dual Normal Terminated (7790-2)
Dual Normal Unterminated (7790-3)
Dual Feed Thru Model (7790-4)
30,000 cycles minimum
July 2011
www.winchesterelectronics.com
7795 Series Video Jackfields
P/N 7795-1
1 RU high Video Jackfield includes 24 Video jacks P/N 7790-2, terminated
P/N 7795-11
1 RU high Video Jackfield includes 30 Video Jacks P/N 7790-2, terminated
P/N 7795-12
1 RU high Video Jackfield includes 32 Video Jacks P/N 7790-2, terminated
P/N 7795-13
1 RU high Video Jackfield includes 34 Video Jacks P/N7790-2, terminated
P/N 7795-14
1.5 RU high Video Jackfield includes 32 Video Jacks P/N 7790-2, terminated
P/N 7795-29
P/N 7795-33
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
8600 Series Miniature Audio-Video
Interconnect System
Product Benefits
Exceeds SMPTE 292M
Terminate to dominant broadcast cable
Permits higher circuit density (up to 56
circuits per 19” panel)
Positive locking equipment prevents
accidental unmating
Enables in-house serviceability
Specifications
Material (Jacks)
Spring Members & Contacts
Insulators
Connector Bodies
Beryllium Copper
Polyphenylene Oxide
Zinc
Equipment Plugs
Plug Bodies
Brass
Plug ContactsBrass
Crimp SleevesBronze
O-Ring
Silicone Rubber
Insulators
Teflon®
Patch Plugs
Plug BodiesBrass
Plug Contacts
Brass
Crimp SleevesBronze
Insulators
Teflon®
Electrical
Configuration
Nominal Impedance
Frequency Range
Return Loss
Dual Self Normal, Terminated
75 Ohms
DC to 1.5 GHz, -20 dB max
1.5 to 2.4 GHz, -19 dB max
Mechanical
Life
Withdrawal Force
30,000 Cycles
2.0 lbs. Minimum
Finishes
Jack BodyNickel
Plug BodyNickel
Spring Members & Contacts
(Jacks and Plugs)
Gold
Crimp Sleeves (Plugs)
Nickel
Return Loss
July 2011
www.winchesterelectronics.com
Dimension Drawing - Audio-Video Jack
P/N 8600-2
75 Ohm Miniature Audio-Video Jack
Schematics
Dual Self Normal Terminated
(75 Ohms + 1%, 1/2w)
P/N 8600-2
Miniature Audio-Video Jackfield
P/N 8602-015-056
Miniature Audio-Video Jackfield includes 56 Audio-Video Jacks P/N 8600-2, Terminated
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
2065 Series BNC Connectors
Product Benefits
Full crimp design
Designed for analog & digital cables
Field installable
Meets or exceeds HDTV standards
Specifications
Electrical
Characteristic Impedance
75 Ohms
Voltage Rating
500 Volts RMS
Return Loss
Less than -36 dB to 1 GHz;
-25 dB to 2 GHz;
-23 dB to 3 GHz;
-20 dB to 5 GHz
Contact Resistance
Center Contact .0014 Ohms
Outer Contact .002 Ohms
Insulation Resistance
5000 megohms
Mechanical
Durability
Center Contact Retention
Coupling Mechanism
Force to Engage/Disengage
Interface Dimension
Environmental
Thermal Shock
Moisture Resistance
Corrosion (Salt Spray)
Flammability
Vibration
Solvent Resistance
500 Cycles Min. Center Contact 6 lbs. Minimum
100 lbs. Minimum
Torque 2.5 in-lbs. Max.;
Longitudinal force 3.0 lbs. Max.
MIL-C-39012 except 75 Ohms
Return Loss
-65°C to +165°C
0 to 95%: MIL-STD-202
Method 106
MIL-STD-202 Method 101
Test Condition B
UL 94-VO Rated
(Center Conductor Insulator)
MIL-STD-202 Method 204
Test Condition B
MIL-STD-202 Method 215
Finishes
Body/Bayonet
Center Conductor
Nickel
50 millionths inch gold plating
over copper plate
Outline Drawing (Plug)
June 2009
www.winchesterelectronics.com
Plugs
KINGS
Part No.
(75 Ohm)
FOR CABLES*
Belden
CABLING
West Penn/ CDT
Gepco
Others
Crimp Die
(KTH-1000)
Crimp Die
(KTH-5000)
Trim Code
KTH-2261
KTH-5003
3-661-1
KTH-2261
KTH-5003
3-661-1
2065-1-9
9209A
2065-2-9
1505A
1506A
9259
819
25819
815
VPM2000
VPM2000TS
VE61859M
2065-15-9
8281
P806
VP618PE
VP6000
VP618TK
WE 724
KTH-2119
KTH-5002
3-661-4
2065-7-9
8241
VJ59U
RG-59
RG-210
KTH-2261
KTH-5003
3-661-1
2065-8-9
7731A
8213
VHD1100
KTH-2004
KTH-5004
3-661-3
2065-10-9
1694A
1695A
VSD2001
VSD2001TS
KTH-2325
KTH-5017
3-661-1
2065-11-9
1855A
1865A
2065-29-9
1279R
1279P
2065-28-9
1520A
179DT
6350
256350
WP6355
HD825
HD25825
WP8255
WP258255
VDM230
VDM250
RG-179
RG-187
Bulk Packs
Available?
YES
YES
YES
KTH-2025
KTH-5003
3-661-1
YES
KTH-2276
KTH-5001
3-661-1
YES
KTH-2258
KTH-5001
3-661-1
YES
Trim Code
A
B
C
3-661-1
.624
.312
.155
3-661-3
.687
.375
.187
3-661-4
.668
.356
.200
*Consult factory for
cables not listed
Within Series Adapters
Dimensions
Kings
Part Number
Adapter Ends
A
(True 75 Ohm)
Mounting
Hole
B
ln
mm
ln
mm
2029-9-9
Bulkhead, Jack-Jack
1.28
32.5
0.69 D
17.5 D
2029-15-9
Jack-Jack
1.28
32.5
0.44 D
11.2 D
2029-16-9
Jack-Plug-Jack
1.28
32.5
1.06
26.9
2029-17-9
Bulkhead, Jack-Jack, iso. ground
1.28
32.5
0.63 D
16.0 D
2029-20-9
Jack-Plug, Right Angle
0.90
22.9
1.03
26.2
A
A
Terminations
Dimensions
Kings
Part Number
(True 75 Ohm)
2555-3-32
A
ln
mm
1.00
25.4
B
ln
0.57 D
Notes
mm
14.5 D
75 ohm, 0.1%, 1/2 watt
Note:
Connectors are designed for use on both analog
and digital cable. Consult your cable manufacturer
for cable performance data.
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Customer Service (803) 909-5000
Winchester Electronics Presents...
2065 Series Long Barrel BNC
Product Benefits:
Ergonomic design - longer grip
Designed for analog & digital cables
Full crimp design
Field installable
Meets or exceeds HDTV standards
White markings to visually confirm correct mating
Cable Trim
A
B
C
1
0.748
0.394
0.138
2
0.624
0.312
0.155
Crimp Tooling
KINGS®
Part Number*
Cables
Crimp Die
(KTH-1000)
Crimp Die
(KTH-5000)
Hex
Size
Packaging**
Cable
Trim
2065-E00-7CH02N
Belden 7731A
N/A
KTH-5007
.071/.401
Single
1
2065-E00-C7102N
Belden 1505A
Gepco VPM2000
KTH-2261
KTH-5003
.041/.255
Single
2
2065-E00-C7202N
Belden 1855A
Gepco VDM230
KTH-2025
KTH-5003
.041/.178
Single
2
2065-E00-C7701N
Belden 179DT/1855ENH
KTH-2258
KTH-5001
.041/.128/.188
Single
2
2065-E00-C9004N
Belden 1694A
Gepco VSD2001
KTH-2325
KTH-5017
.046/.278
Single
2
*Consult factory for Part Number with optional white marking to aid users in confirming a connector is fully mated.
**For Bulk Pack, add “U” to end of part number. Consult factory for availability.
July 2011
www.winchesterelectronics.com
Mechanical
Electrical
Durability: 500 cycles Min.
Impedance:
Frequency Range:
Voltage Rating:
Return Loss: Center Contact
Center Contact Retention:
6 lbs. Min
Coupling Mechanism:
100 lbs. Min
Interface Dimension:
MIL-C-39012
Force to Engage/Disengage:
Torque 2.5 in-lbs. Max.;Longitudinal force 3.0 lbs. Max
Environmental
75 Ohm
DC to 6 GHz
500 Volts RMS
1.5 GHz< -31 dB
3 GHz < -24 dB
6 GHz < -20 dB
Contact Resistance: Center .0014 Ohms
Outer .002 Ohms
Insulation Resistance:5000 megohms
Finishes
Thermal Shock:
Moisture Resistance:
-65°C to +165°C
Body/Bayonet:
Nickel
0 to 95%: MIL-STD-202
Center Conductor:
Gold plating over
copper plate
Method 106
Corrosion (Salt Spray): MIL-STD-202 Method 101 Test Condition B
Flammability:
UL 94-VO Rated
(Center Conductor Insulator)
Vibration: MIL-STD-202 Method 204
Test Condition B
Solvent Resistance:
MIL-STD-202 Method 215
RETURN LOSS (dB)
-20
-22
-24
SIMULATED
MEASURED
S11 (dB)
-26
-28
-30
-32
-34
-36
-38
0
1
2
3
4
5
6
FREQUENCY (GHz)
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Introduces...
3325 Series Miniature BNC
Product Benefits:
Mini BNC plugs are 20% smaller than
standard BNC plugs. Excellent choice for
high density applications requiring a miniaturized
quick connect / disconnect BNC coupling mechanism
True 75 Ohm - Compliant to SMPTE 424M (3G-SDI) Specification
Reliable Crimp / Crimp cable termination using existing KTH-1000 and KTH-5000
Die Sets
Durable screw machined bodies and components built to withstand rough handling
in Telco and Broadcast applications
Plug Specifications
Electrical
Environmental
75 Ohms
DC to 6.0 GHz
500 Volts RMS
Up to 1.5 GHz, < -20 dB
Up to 3.0 GHz, < -15 dB
Up to 6.0 GHz, < -10 dB
Center Contact .0014 Ohms
Outer Contact .002 Ohms
5000 megohms
Impedance
Frequency Range
Voltage Rating
Return Loss (Mated Pair)
Contact Resistance
Insulation Resistance
MINI-BNC 75 OHM PLUGS FOR LOW-LOSS DIGITAL CABLES (BELDEN OR EQUIVALENT)
RETURN LOSS (dB) VS. FREQUENCY (GHz)
0
-20
S11 (dB)
Mechanical
Durability
Center Contact Retention
Coupling Mechanism
Force to Engage/Disengage
SMPTE 424M (3G-SDI)
-10
-30
1855A
1694A
Coupling Nut/Body
Contact
Crimp Sleeve
-50
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
500 Cycles Minimum
6 lbs. Minimum
100 lbs. Minimum
Torque 2.5 in-lbs. Maximum;
Longitudinal force 3.0 lbs. Max.
Finishes
1505A
-40
-60
-65°C to +165°C
0 to 95%: MIL-STD-202
Method 106
MIL-STD-202 Method 101
Test Condition B
UL 94-VO Rated
(Center Conductor Insulator)
MIL-STD-202 Method 204
Test Condition B
MIL-STD-202 Method 215
Thermal Shock
Moisture Resistance
Corrosion (Salt Spray)
Flammability
Vibration
Solvent Resistance
.000100 Minimum Nickel
.000030 Min. Gold over Nickel
.000050 Minimum Nickel
6
FREQUENCY (GHz)
H
D
TM
July 2011
www.winchesterelectronics.com
Plugs
Crimp Tooling
KINGS®
Part Number
Cables
Crimp Die
(KTH-1000)
3325-E00-07701N
735A
KTH-2185
3325-E00-C9001N
Belden 1694A
Gepco VSD2001
KTH-2325
3325-E00-C7101N
Belden 1505A
Gepco VPM2000
3325-E00-C7201N
Crimp Die
(KTH-5000)
Hex Size
Packaging
.041/.178
Single
KTH-5017
.046/.278
Single
KTH-2261
KTH-5003
.041/.255
Single
Belden 1855A
Gepco VDM230
KTH-2025
KTH-5003
.041/.178
Single
3325-E00-C7701N
Belden 179DT
KTH-2258
.041/.188/.128
Single
3325-E00-V3601N
Belden 1855ENH
KTH-2025
.041/.178
Single
Extraction Tool Available - Part #KTH-2345
Future Offerings In Development
Printed Circuit Board (PCB) Jacks
Figure 1
Figure 2
Figure 3
Figure 4
KINGS®
Part Number
Description
Figure
3327-099-00401G
Edgemount Bulkhead Jack
1
3327-099-00402G
Vertical PCB Jack, 3 Ground Pin
2
332B-060-00401G
Right-angle PCB Jack
3
332B-099-00401N
Right-angle, Stacking 2-Pos. PCB Jack
4
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
DIN 1.0/2.3 RF Connector
Product Benefits:
Quick connect Push/Pull system.
Locking mechanism that will not vibrate loose as threaded connectors are prone to do.
When mated, the connectors can rotate 360°.
Allows for connectors to be 2-3 times more densely packed than BNC’s.
Operation up to 10 GHz.
Supports 3Gbps HD SDI applications.
Uses existing tooling.
Crimp center contact.
July 2011
www.winchesterelectronics.com
Mechanical
Electrical
Mating:
Push/Pull, Slide-on
Impedance:
Durability:
500 cycles
Frequency Range: DC to 10 GHz
Return Loss:
75 Ohm
1 GHz < -32 dB
3 GHz < -23 dB
6 GHz < -15 dB
Winchester Electronics is pleased to introduce the release of our new KINGS® brand
DIN 1.0/2.3 RF coaxial connectors. This addition to our connector offering, with the KINGS®
brand reputation for high quality and high reliability, will provide an exceptional product that
features a quick connect Push/Pull coupling system for easy mating.
These high performance connectors are available in 50 Ohm and 75 Ohm versions
capable of operating up to 10 GHz and a mating life of 500 cycles. The compact design
allows for dense packaging, ideally suited for applications where space is limited. This series
complies with CCCE 22230, DIN 41626, and DIN 47297 specifications.
*Introducing the DIN 1.0/2.3
KINGS® Part Number*
Extraction Tool
Cable
Crimp Tool Crimp Die
0345-E00-28C01N
Tachii TCX-2.8CHD or equiv.
KTH - 5000
KTH - 5009
0345-E00-C7201N
Belden 1855A, Gepco VDM230, or equiv.
KTH - 1000
KTH - 2025
0345-E00-C7202N
Belden 1855A, Gepco VDM230, or equiv.
KTH - 1000
KTH - 2025
0345-E00-V3601N
Belden 1855ENH, Image 360, or equiv.
KTH - 1000
KTH - 2113
0345-E00-C7101N
Belden 1505A, or equiv.
KTH - 1000
KTH - 2261
0345-E00-C9001N
Belden 1694A, Gepco VSD2001, or equiv.
KTH - 1000
KTH - 2325
(Point & Shoot Contact)
034B-060-00401H
N/A
N/A
N/A
0347-060-00401H
N/A
N/A
N/A
(Right Angle PC)
(Straight PC)
*Please call for 50 Ohm part numbers as well as additional 75 Ohm part numbers.
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Introduces...
Miniature DIN Video Patching System
Product Benefits:
High Density - Ability to mount 48 Dual Port Video
Jacks (96 ports) in 1.5RU Jackfield. Represents 50% increase
in port count versus Mid-size jackfields (32 Dual Video Jacks
or 64 ports).
Equipment side features proven and trusted DIN 1.0/2.3 jack
Interface and mates with standard DIN 1.0/2.3 Plug Connectors.
Jacks feature sturdy metal cases and screw-in panel mounting to
ensure a firm, reliable installation - even in vibration applications
such as mobile trucks.
Meets SMPTE 424M (3G-SDI) and HDTV standards - suitable for Analog, Serial Digital, and HDTV
Specifications
Brass or Zinc Alloy
Beryllium Copper
Beryllium Copper
Teflon®
Topas®
.000100 Minimum Nickel
.000050 Minimum Gold over Nickel
860G Series High Density Video Jack (SINGLE) for Self-Terminated and Feed-Through Modes
RETURN LOSS (dB) VS. Frequency (GHz)
860G Series High Density Video Jack (DUAL) for Normal and Feed-Through Modes
RETURN LOSS (dB) VS. Frequency (GHz)
0
0
SMPTE 424M
-10
SMPTE 424M
-10
-20
-20
-30
S11 (dB)
10,000+ Cycles on Front Port
2.0 lbs. Minimum
Durability
Impedance
75 Ohms
Withdrawal Force
Frequency Range
Dual Jacks: DC to 4.5 GHz
Single Jacks: DC to 4.5 GHz
Return Loss
Dual Jacks: -15 dB up to 3.0 GHz
Material
-10 dB up to 4.5 GHz
Body:
Single Jacks: -15 dB up to 3.0 GHz
Contacts:
-10 dB up to 4.5 GHz
Springs:
Environmental
Insulators:
Dielectrics:
Thermal Shock:
-40° C to 65­° C Operating
-55­­° C to 85° C Non Operating
Moisture Resistance:
0% to 95%
Finishes
MIL-STD-202 Method 106
Body:
Corrosion (Salt Spray):
MIL-STD-202 Method 101
Center Contacts:
Test Condition B
Flammability:
UL 94-VO rated
Vibration:
MIL-STD-202 Method 201
Solvent Resistance:
MIL-STD-202 Method 215
S11 (dB)
Mechanical
Electrical
Feed Through
(DIN-to-Patch Plug)
Normal Through
(DIN-to-DIN)
-40
-30
Self Terminated
(DIN)
-40
Feed Through
(DIN-to-Patch Plug)
-50
-60
-50
0
0.5
1
1.5
FREQUENCY (GHz)
H
D
TM
2
2.5
3
-60
0
0.5
1
1.5
2
2.5
3
FREQUENCY (GHz)
April 2011
www.winchesterelectronics.com
Miniature DIN Video Jacks & Jackfields
8600-000-00701N - 1.5RU, 2x48
Dual, Normal, Terminated
8600-000-00702N - 1.5RU, 3x48
Dual/Normal, Single, Terminated
860G-860-03401N
Dual, Normal, Terminated
860G-860-03402N
Single, Terminated
Miniature Patch Cords
860L-860-XXX01-YY
Length in Inches
Product Benefits:
Color
Part Number
Length In.
YY
COLOR
860L-860-01201-YY
12.00
-01
BROWN
860L-860-02401-YY
24.00
-02
RED
860L-860-03601-YY
36.00
-03
ORANGE
860L-860-04801-YY
48.00
-04
YELLOW
860L-860-06001-YY
60.00
-05
GREEN
860L-860-07201-YY
72.00
-06
BLUE
860L-860-09601-YY
96.00
-07
VIOLET
860L-860-12001-YY
120.00
-08
GREY
860L-860-14401-YY
144.00
-09
WHITE
860L-860-28801-YY
288.00
-10
BLACK
Patch Cords available in 10 popular colors
for visual signal identification and are
made with high quality Belden 1855A or
Gepco VDM230 cable
Color matching molded boots provide
superior strain relief, protection, and a high
quality professional appearance
Patch Cords available in standard or
custom lengths providing designers with
maximum flexibility
True 75 Ohm Patch Plug features reliable
Crimp/Crimp termination to ensure long
lasting system performance
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
3345 Series RCA Connectors
75 Ohm
Product Benefits
75 Ohm impedance
Field installable
Full crimp design
Designed for Analog & Digital cables
Specifications
Electrical
Impedance
Voltage Rating
Return Loss
Insulation Resistance
Mechanical
Center Contact
Retention
Finishes
Body
Center Conductor
75 Ohms
500 Volts RMS
Less than -20 dB to 300 MHz
5000 megohms
Environmental
Thermal Shock
Moisture Resistance
Corrosion (salt spray)
Flammability
Vibration
Solvent Resistance
6 lbs. Minimum
Nickel
50 millionths inch gold plating
over nickel over copper plate
-65°C to +165°C
0 to 95%
MIL-STD-202, Method 106
MIL-STD-202, Method 101
Test Condition B
UL 94-VO Rated
(Center Conductor Insulator)
MIL-STD-202, Method 204
Test Condition B
MIL-STD-202, Method 215
Return Loss
Outline Drawing (Plug)
June 2009
www.winchesterelectronics.com
RCA Connectors - 75 Ohm
KINGS
Part No.
(75 Ohm)
FOR CABLES*
Belden
West Penn/
CDT
Gepco
3345-1-9
1505A
1506A
9259
819
25819
815
3345-2-9
1694A
1695A
3345-3-9
1855A
1865A
3345-4-9
1279R
1279P
CABLING
Crimp Die
(KTH-1000)
Crimp Die
(KTH-5000)
Trim
Code
VPM2000
VPM2000TS
VE61859M
KTH-2261
KTH-5003
3-661-1
6350
256350
WP6355
VSD2000
VSD2001TS
KTH-2255
KTH-5003
3-661-1
HD825
HD25825
WP8255
WP258255
VDM230
VDM250
KTH-2025
KTH-5003
3-661-1
KTH-2276
KTH-5001
3-661-1
Others
*Consult factory for cables not listed
Trim Code
A
B
C
3-661-1
.624
.312
.155
Dimensions in inches
Note:
Connectors are designed
for use on both analog and
digital cable. Consult your
cable manufacturer for
cable performance data.
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Customer Service (803) 909-5000
Winchester Electronics Presents...
Tri-Loc® Series Connectors
Standard
Jacks and Plugs
Product Benefits
Durable weatherproof construction
Easy, two-crimp installation
Push-on, pull-apart mating
75 Ohm impedance
Non-conductive anti-shock safety tip on contacts
Adapters are available in a variety of configurations
Specifications
Material
Environmental
BodyBrass
Center Contacts
Brass (Male)
Beryllium Copper (Female)
Insulators
Teflon®
Spring Member
Beryllium Copper
Moisture
Temperature
Corrosion
Electrical
Impedance
Operating Frequency
Mechanical
Life
Cable Retention
75 Ohms
DC to 2.5 GHz
0 to 98%
MIL-STD-202, Method 106
-20° to +70° C
MIL-STD-202, Method 101
Finishes
BodyNickel
Center Contacts
Gold over Nickel
Outer Contacts
Silver
30,000 cycles minimum
140 lbs minimum, 1/2” diameter cable
100 lbs minimum, 3/8” diameter cable
July 2011
www.winchesterelectronics.com
Standard Connectors - Adapters, Jacks, and Plugs
Cable
Belden
Group
70
73
74
76
8233
8233A
1856A
1857A
9267
9232
1858A
8232
8232A
78
88232
79
1859A
80
7784A
West
Penn/
CDT
Gepco
Center
Conductor
O.D.
Core
O.D.
Inner
Braid
O.D.
Inner Jacket
O.D.
Outer
Braid
O.D.
Outer
Jacket
O.D.
3811
1150
VT61811PE
VT61811
#14 AWG
Solid .064
.285 Foam
PE
.315
.365 PE
.395
.475 PE
LVT61859
VT61859
#20 AWG
Solid .032
.146
.176
.216 PE
.250
.360 NEOP
.392 PE
.422
.520 NEOP
.256
.315 + .007
PE
.216
.246
.350 Solef
.378
.410
Solef
3.44
(8.7 mm)
PVC
.371
(9.4mm)
.443
(11.0 mm)
#14 AWG
.312
.342
Stranded .064 Foam PE
.143 + .004
#20 AWG
.176
Foam PE
Solid .032
#20 AWG
.140
.168
Solid .032
Foam
#14 AWG
.285
VT61811TK
.313
Stranded .064 Foam PE
.236
.055
.284
(1.4mm)
(6.0 mm)
(7.2mm)
Stranded
Foam PE
LVT61811
3815
253811
.226 + .005
PE
.188
Refer to RF Catalog for entire list of part numbers
Adapter, Plug-Plug
Adapter, Jack-Jack
Adapter, Jack-Jack
Bulkhead Mount
Adapter, Jack-Plug
Bulkhead Mount
Standard Plugs
Standard Jacks
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
International Tri-Loc®
Jacks and Plugs
Product Benefits
Rugged weatherproof construction
Meets or exceeds SMPTE 292 requirements
Mates with Fischer 1051 Series triaxial connectors
Suitable for Analog, Serial Digital, and HDTV
Push-on coupling with audible “snap” to ensure proper mating
Jacks and plugs available for 8mm, 11mm, and 14mm cables
Retro-fit kits available for field replacement without re-termination of entire connector
Specifications
Material
Environmental
BodyBrass
Entry Body
Beryllium Copper
Insulators
Teflon®
Spring Member
Beryllium Copper
Crimp Sleeves
Commercial Bronze
Moisture
Temperature
Corrosion
Electrical
Impedance
Operating Frequency
Mechanical
Life
Cable Retention
75 Ohms
DC to 2.5 GHz
30,000 cycles minimum
140 lbs minimum, 1/2” diameter cable
100 lbs minimum, 3/8” diameter cable
JACK
0 to 98%
MIL-STD-202, Method 106
-20° to +70° C
MIL-STD-202, Method 101
Finishes
BodyNickel
Center ContactsGold
Note:
Connectors are designed for use on both
analog and digital cables. Consult your cable manufacturer for cable performance data.
PLUG
July 2011
www.winchesterelectronics.com
Part Number
Cable Group
Belden
GEPCO
Description
780270
70
8233
VT61811, VT61811PE
Bulkhead Jack
780370
70
8233
VT61811, VT61811PE
Jack
780570
70
8233
VT61811, VT61811PE
Bulkhead Plug
780670
70
8233
VT61811, VT61811PE
Plug
783870
70
8233
VT61811, VT61811PE
Retrofit Kit (F)
785870
70
8233
VT61811, VT61811PE
Retrofit Kit (M)
780273
73
1856A, 1857A, 9267
VT61859, LVT61859
Bulkhead Jack
780373
73
1856A, 1857A, 9267
VT61859, LVT61859
Jack
780573
73
1856A, 1857A, 9267
VT61859, LVT61859
Bulkhead Plug
780673
73
1856A, 1857A, 9267
VT61859, LVT61859
Plug
781273
73
1856A, 1857A, 9267
VT61859, LVT61859
Bulkhead Plug Receptacle
783873
73
1856A, 1857A, 9267
VT61859, LVT61859
Retrofit Kit (F)
785873
73
1856A, 1857A, 9267
VT61859, LVT61859
Retrofit Kit (M)
780274
74
9232
LVT61811
Bulkhead Jack
780374
74
9232
LVT61811
Jack
780574
74
9232
LVT61811
Bulkhead Plug
780674
74
9232
LVT61811
Plug
783874
74
9232
LVT61811
Retrofit Kit (F)
785874
74
9232
LVT61811
780276
76
8232, 8232A
Bulkhead Jack
780376
76
8232, 8232A
Jack
780576
76
8232, 8232A
Bulkhead Plug
780676
76
8232, 8232A
Plug
783876
76
8232, 8232A
Retrofit Kit (F)
785876
76
8232, 8232A
Retrofit Kit (M)
780280
80
7784A, 7784AS
Bulkhead Jack
780380
80
7784A, 7784AS
Jack
780580
80
7784A, 7784AS
Bulkhead Plug
780680
80
7784A, 7784AS
Plug
781280
80
7784A, 7784AS
Bulkhead Plug Receptacle
783880
80
7784A, 7784AS
Retrofit Kit (F)
785880
80
7784A, 7784AS
Retrofit Kit (M)
780290
90
7783
Bulkhead Jack
780390
90
7783
Jack
780590
90
7783
Bulkhead Plug
780690
90
7783
Plug
781290
90
7783
Bulkhead Plug Receptacle
783890
90
7783
Retrofit Kit (F)
785890
90
7783
Retrofit Kit (M)
Retrofit Kit (M)
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500
Winchester Electronics Presents...
Crimp Tools
Machine Crimp Tool
Product Benefits
Portable, bench-mounted with no
permanent airline attached.
Designed for use with KINGS® KTH-1000
and KTH-2000 die sets.
Ideal for long or short production runs.
Convenient foot control frees operator
hands for crimping.
Quick and easy changing from one die
to another.
Pneumatic interlock feature guarantees
constant crimping.
Pneumatic Crimping Machine
KTM-5000
Designed with OSHA safety requirements
in mind.
Low maintenance.
Specifications
Dimensions (LxWxH)
12” x 7.0” x 12.5”
(305 x 178 x 318 mm)
Weight
38 pounds (17.3 kilograms)
Air Pressure
90 psi (6 bar)
Required Air Supply
85-110 psi (5.6 - 7.3 bar)
Air Consumption
0.085 cubic feet (2.4 liters)
Maximum Stroke
0.78” (20 mm)
Safety ShieldYes
Cycle Speed
54 cycles per minute
Crimp Action
Straight
Maximum Recommended
Termination Size
88 mm O.D.
July 2011
www.winchesterelectronics.com
KTH-1000 Hand Crimp Tool
KTH-1000
• Interchangeable Dies, utilize KTH-2000
Series die sets.
• Die Sets not included but are purchased
separately.
• Ratchet type tool.
• Does not release until crimp is complete.
• Frame made of heavy duty lightweight
aluminum.
• Ratchet release feature tool type.
KTH-5000 Hand Crimp Tool with KTS-8 Stripper
KTH-5000
• KTH-5000 Crimp Handle uses the KTH-5000
Series die sets.
• Economical and user-friendly alternative
to other industrial crimping tools.
• Lightweight, ergonomic tool allows for
one-handed operation.
• Ultra-smooth ratchet design with rubber
grip handles.
• Available dies developed specifically for
precise crimping of KINGS® connectors.
KTS-8 Stripper
• Hand-held tool is lightweight and compact–
ideal for field use.
• Blade cassettes and memory blocks
interchange quickly and easily.
• Cam adjustment ensures precise hold on
cable without distorting the jacket.
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500