TPP Series 100-150W Medical AC/DC Power Supply AC/DC ress g o r p et in Highest power density open frame power supply 100 W in 2” x 3” and 150 W in 2” x 4” Medical safety approval according IEC 60601-1 3rd edition 2 x MOPP CB Scheme tashe a d l l Fu % to 92 % across 10 %-100 % load range, <0.3 W no load power consumption Safety class II prepared Models Input voltage range 90–264 VAC, 47–63 Hz Line regulation 0.3 % max. Load regulation 0.5 % TPP 100-105 TPP 100-112 Ripple & noise (20MHz) < 1 % of Vout TPP 100-115 EMI suppression EN 55022 class B TPP 100-124 EMC immunity EN 61000-6-2 Output power max. Order code Output voltage Output current max. 5 VDC 12 VDC 20.0 A 8.34 A 15 VDC 6.67 A 24 VDC 4.17 A TPP 100-128 28 VDC 3.58 A 92 % typ. TPP 100-148 48 VDC 2.09 A Operating temperature –20 ° C to +70 ° C Safety standards / approvals IEC 60601-1 3rd edition 2 x MOPP, UL 60601-1 IEC/EN 60950-1, UL 60950-1 TPP 150-112 TPP 150-115 12 VDC 15 VDC 12.5 A 10.0 A 24 VDC 6.25 A Degree of protection Safety class II prepared TPP 150-136 36 VDC 4.17 A Casing Open frame with pin connector TPP 150-148 48 VDC 3.13 A Full datasheet www.tracopower.com/products/tpp.pdf TPP 150-124 100 W 150 W TSP/TSPC DIN-Rail Battery Controller Modules shee ata Full d All modules provide a professional battery control function to charge and monitor external lead-acid batteries. These are to build professional DC-UPS systems using TSP and TSP-WR series power supplies. Battery protection against over-voltage, deep discharge, short circuit and reverse connection Remote On/Off for battery and power supply Alarm outputs for input, output and battery condition Controlled end of charge voltage by external battery temperature sensor TSPC 240UPS 24 VDC / 240 W power supply with integrated battery controller TSP-BCMU360 Universal battery controller module, 24 / 48 VDC step up from 12 V batteries Models Order code 14 www.tracopower.com Battery / max. charging current Input Output 115 / 230 VAC (selection switch) 24 VDC / 10 A (12A boost) 12 V / 1 A Any 24 VDC or 48 VDC Input voltage, 240 W (360 W boost) 12 V / 1.2 A TSP-BCM12 TSP 070-112 or TSP 140-112 12 VDC 12 V / 1.4 A TSP-BCM24 TSP 090-124 or TSP 180-124 (-WR) or TSP 360-124(-WR) 24 VDC 24 V / 3.0 A TSP 600-124(-WR) 24 VDC 24 V / 6.4 A TSP 090-148 or TSP 180-148 or TSP 360-148 48 VDC 48 V / 1.4 A TSP 600-148 48 VDC 48 V / 3.0 A TSPC 240UPS TSP-BCMU360 TSP-BCM24A TSP-BCM48 TSP-BCM Battery controller modules for TSP power supplies, for 12, 24 and 48 VDC output voltage systems ess r g o r t in p TSP-BCM24A