DC/DC Converter

DC/DC Converter
TYL/TVL Series 1.5-5 Watt
Features
Ultra low Ripple and Noise
Full SMD-Design with Ceramic
Capacitors
Tightly regulated Outputs
High Output Stability
Short Circuit Protection
Shielded Metal Case
Single- and Dual Output Models
2 Year Product Warranty
The TYL and TVL Series are DC/DC-Converter with very low output
ripple and noise specification. These DC/DC-Converter are an
ideal solution for noise sensitive applications as analoge circuits,
audio applications, reference voltages or mesuring systems. SMDtechnology and a 100 % production test ensure a very high
reliability of these products.
Models
Ordercode
TYL 05-05S30
TYL 05-12S12
TYL 05-15S10
TYL 05-05W08
TYL 05-12W06
TYL 05-15W05
TVL 05-1220
TVL 05-1225
TVL 05-1516
TVL 05-1520
www.tracopower.com
Input voltage range
Output 1
Output 2
Ripple and noise max.
4.75 – 6 VDC
5
12
15
+5
+12
+15
VDC /
VDC /
VDC /
VDC /
VDC /
VDC /
300
120
100
80
65
53
mA
mA
mA
mA
mA
mA
– 5 VDC / 80 mA
–12 VDC / 65 mA
–15 VDC / 53 mA
6 mVpk-pk
6 mVpk-pk
6 mVpk-pk
6 mVpk-pk
6 mVpk-pk
6 mVpk-pk
4.75 – 6 VDC
+12
+12
+15
+15
VDC /
VDC /
VDC /
VDC /
200
250
165
200
mA
mA
mA
mA
–12
–12
–15
–15
3
3
3
3
VDC /
VDC /
VDC /
VDC /
200
125
165
100
mA
mA
mA
mA
mVpk-pk
mVpk-pk
mVpk-pk
mVpk-pk
Seite 1
DC/DC Converter
TYL/TVL Series 1.5-5 Watt
Input Specifications
Input current (no load)
TYL models
TVL models
Input current (full load)
TYL models
TVL models
< 95 mA
< 170 mA
500 mA typ.
1’600 mA typ.
Otput Specifications
Voltage set accuracy
Regulation
±3%
– Input variation Vin min. to Vin max. TYL
TVL
– Load variation 0 – 100 %
TYL
TVL
Ripple and noise (20 MHz Bandwidth)
models:
models:
models:
models:
TYL models:
TVL models:
± 0.3 % max.
± 0.03 % max.
± 0.3 % max.
± 0.18 % max.
6 mVpk-pk max.
3 mVpk-pk max.
Temperature coefficient
± 0.02 % / °C
Output current limitation
>120 % of Iout max.
Short circuit protection
indefinite (automatic recovery)
General Specifications
Temperature ranges
– Operating
– Storage
– 25°C ... +71°C
– 45°C ... +85°C
Derating
3%/°C above 50°C
Efficiency
60% (TVL 05-05W08: 45%)
Humidity (non condensing)
30 – 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217 F)
>1’000’000h @ + 25 °C
Isolation voltage
Input/Output
500 VDC
Isolation capacity
Input/Output
100 pF
Isolation resistance
Input/Output (500 VDC)
> 10 M Ohm
Switching frequency
TYL models:
70 - 400 kHz depending on load
TVL models:
50 - 300 kHz depending on load
Vibration
5 to 10 Hz amplitude 10 mm pk-pk
10 to 55 Hz acceleration 2 G
Shock
acceleration 20 G max. time 11 ms
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Seite 2
DC/DC Converter
TYL/TVL Series 1.5-5 Watt
Physical Specifications
Case material
Steel chrome-nickel plated
Potting material
Silicon rubber TSE (flammability to UL94V-0)
Weight
TYL models:
TVL models:
14 g (0.49 oz)
31 g (1.09 oz)
Soldering temperature
max. 260 °C / 10 sec.
Application
Ripple an noise reduction to <2mVpk-pk
Use external capacitors to reduce ripple an noise
Single output models:
+Vin
TYL
C1: 47 µF/10V
10 µF/10V
C2: 1 µF/16V
1 µF/16V
C3: 470 nF
470 nF
+Vout
+Vin
=
C1
TYL / TVL
low ESR type
C2
C3
Tantalum
Ceramic
C2
C4
Tantalum
Ceramic
C3
C5
Tantalum
Ceramic
Load
TVL
–Vin
–Vin
–Vout
+Vin
+Vout
TYL
C1:
47 µF/10V
10 µF/10V
C2+C3:
2.2 µF/16V
1 µF/16V
C4+C5:
470 nF
470 nF
+Vin
=
TYL / TVL
C1
Common
low ESR type
–Vin
–Vin
Load2
TVL
Load1
Dual output models:
–Vout
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Seite 3
DC/DC Converter
TYL/TVL Series 1.5-5 Watt
2.33
(0.9)
Outline Dimensions mm (inches)
TYL
(0.9)
22.86
1
Bottom
view
15 10
13 12
(0.2)
5.08
(1.1)
27.94
(1.28)
32.6
24
5 10.3
(0.2) (0.4)
2.58
15.24
(0.1)
(0.6)
TYL Pin-Out
20.4
(0.8)
Pin
Single
Dual
1
–Vin (GND)
–Vin (GND)
10
–Vout
–Vout
12
–Vout
Common
13
+Vout
Common
15
+Vout
+Vout
24
+Vin (Vcc)
+Vin (Vcc)
(0.61)
TVL Pin-Out
2 1
(0.8)
20.32
(2.02)
51.3 max
TVL
15.5
5.08 (0.02)
Bottom view
5
1.8
4
3
(0.07)
15.5 10.16 10.16
(0.61)
Pin
Dual output
1
+Vin (Vcc)
2
–Vin (GND)
3
+Vout
4
Common
5
–Vout
(0.4) (0.4)
20.32
(0.8)
6
8
(0.24) (0.31)
51.3 max
(2.02)
( ) = Inches
Pin diameter ø 0.6 ±0.05 (0.023 ±0.002)
Tolerances ±0.5 (0.02)
Specifications can be changed without notice
Rev. 12/00
ein Unternehmen der TRACO Gruppe
Comptec Elektronik GmbH • Oskar-Messter-Strasse 20a • D-85737 Ismaning/München
Tel. 089/9611820 • Fax 089/96118220 • [email protected] • www.comptec-elektronik.de
Seite 4