Product Portfolio 2015 DC / DC Converters AC / DC Power Supplies DC / DC Converters PAGE 2 Non-Isolated Step Down DC / DC Converters (POL) SIP Package 0.5 – 30 Amp TSR 0.5 NEW 0.5 AMP • Pos.-pos. circuit • 1.5 to 15 VDC fixed • Input 4.6 – 36 VDC • LM78 compatible • 10.5 x 7.6 x 10.2 mm TSRN 1 • Alternative to linear voltage regulators • High efficiency up to 97% • No heat-sink required • Over-temperature protection • Excellent line/load regulation • Operating temperature -40 – +85°C TSR 1 1 AMP • Pos.-pos. circuit • 1.5 to 15 VDC fixed • Input 4.6 – 36 VDC • LM78 compatible • 10.5 x 7.6 x 10.2 mm 1 AMP TSR 3 3 AMP NEW 0.5 AMP • Pos.-pos. circuit • 1.4 to 15.5 VDC adjust. • Input 4.75 – 32 VDC • Remote On / Off • 15.3 x 9.6 x 9.2 mm TOS • Pos. circuit • 0.75 to 5.5 VDC adjust. • Input 2.4 – 14 VDC • Remote On / Off • Open frame TSR 1SM TOS 6 – 30 AMP • Alternative to linear regulators • High efficiency up to 97% • No heat-sink required • Over-temperature protection • Excellent line/load regulation • Operating temperature -40 – +85°C NEW • Pos.-pos. circuit • 1.2 to 15 VDC fixed • Input 3.0 – 36 VDC • 15.2 x 9.3 x 10.2 mm 6 – 30 AMP 1 AMP • Pos. circuit • 0.75 – 5.5 VDC adjust. • Input 2.4 – 14 VDC • Remote On / Off • Open frame Non-Isolated Step Down DC / DC Converters (POL) SMD Package 0.5 – 30 Amp TSR 0.5SM NEW • Neg.-neg. circuit • -5.0 to -15 VDC fixed • Input -7.0 – 32 VDC • LM79 compatible • 11.7 x 7.5 x 16.5 mm • Pos.-pos. /neg. circuit • (±) 0.6 to 15 VDC adjust. • Input 2.5 – 30 VDC • Remote On / Off • Open frame • Pos.-pos. / neg. circuit • (±) 5.0 to 15 VDC fixed • Input 4.6 – 42 VDC • 11.7 x 7.5 x 10.2 mm TSN 1 1 AMP TSRN 1SM • Pos.-pos. /neg. circuit • (±) 1.2 to 15.5 VDC adjust. • Input 3.3 – 42 VDC • Remote On / Off • 11.7 x 7.5 x 10.2 mm 1 AMP DC / DC Converters PAGE 3 SMD DC / DC Converters 1 – 15 Watt TES 1 1 WATT • 3.3 to 24 VDC (unregulated) • ±10 Input 5, 12, 24 VDC • 13.7 x 8.0 x 7.0 mm TES 2H 2 WATT 2 WATT • EN 55022 class A filter • 3.3 to 15 VDC adjust. • 2:1 Input 9 to 75 VDC • Remote On / Off • IEC / UL 60950-1 • 28.2 x 23.9 mm 2 WATT TDR 2WISM 3 WATT THL 3WISM 2 WATT TON 15SWISM • EN 55022 class A filter • 3.3 to 15 VDC adjust. • 4:1 Input 4.5 to 75 VDC • Remote On / Off • IEC / UL 60950-1 • 28.2 x 23.9 mm 1 WATT TES 2M 2 WATT TDR 3SM 3 WATT • Epoxy over mold (washable) • 5.0 to 15 VDC • 2:1 Input 4.5 to 75 VDC • Remote On / Off • IEC / UL 60950-1 • 18.9 x 12.8 x 8.7 mm 3 WATT • EN 55022 class A filter • 3.3 to 24 VDC • 4:1 Input 4.5 to 75 VDC • Remote On / Off • IEC / UL 60950-1 • 24.0 x 13.7 x 8.3 mm 15 WATT NEW • 4 kVAC I / O-isolation • 5.0 to 15 VDC (unregulated) • ±10 Input 5, 12, 24 VDC • IEC / UL 60950-1, 60601-1 • 24.0 x 13.7 x 9.3 mm • Epoxy over mold (washable) • 5.0 to 15 VDC • 4:1 Input 4.5 to 75 VDC • Remote On / Off • IEC / UL 60950-1 • 18.9 x 12.8 x 8.7 mm • Epoxy over mold (washable) • 5.0 to 15 VDC • 4:1 Input 4.5 to 75 VDC • Remote On / Off • IEC / UL 60950-1 • 18.9 x 12.8 x 8.7 mm TON 15SM TES 2N TMR 1SM • 5.0 to 15 VDC • 2:1 Input 4.5 to 75 VDC • 18.9 x 13.7 x 8.7 mm • EN 55022 class A filter • 3.3 to 15 VDC • 2:1 Input 4.5 to 75 VDC • IEC / UL 60950-1 • 24.0 x 13.7 x 8.3 mm • Epoxy over mold (washable) • 5.0 to 15 VDC • 2:1 Input 4.5 to 75 VDC • Remote On / Off • IEC / UL 60950-1 • 18.9 x 12.8 x 8.7 mm TDR 3WISM 1 WATT • 3000 VDC I / O-isolation • 3.3 to 24 VDC (unregulated) • ±10 Input 5, 12, 24 VDC • 16.3 x 8.0 x 8.0 mm • 3.3 to 15 VDC (unregulated) • ±10 Input 5, 12, 24 VDC • 13.7 x 9.3 x 8.9 mm TDR 2SM TES 1V • MSL Level 2 or better • Operating temperature -40 – +85°C • 1500 VDC I / O-isolation (standard) • Regulated, single and dual output models THL 6WISM • EN 55022 class A filter • 3.3 to 24 VDC • 4:1 Input 4.5 to 75 VDC • Remote On / Off • IEC / UL 60950-1 • 22.0 x 20.3 x 10.2 mm 15 WATT 6 WATT DC / DC Converters PAGE 4 SIP DC / DC Converters 1 – 8 Watt TMA 1 WATT • Unregulated • 3.3 to 15 VDC • ±10 Input 3.3 to 24 VDC • 19.5 x 6.1 x 10.2 mm TMV 2 WATT 2 WATT 2 WATT • Regulated • 3000 VDC I / O-isolation • 3.3 to 15 VDC • 2:1 Input 4.5 to 75 VDC • Remote On / Off • 21.8 x 9.2 x 11.1 mm NEW 2 WATT TMR 1 NEW TMR 2 3 WATT TMR 3E 1 WATT TMR 3WIE • Regulated, cost optimized • 3.3 to 15 VDC • 4:1 Input 4.5 to 75 VDC • Remote On / Off • (min. load required) • 21.8 x 9.3 x 11.2 mm TMV EN 2 WATT TMH 2 WATT • Unregulated • 5.0 to 24 VDC • ±10 Input 5 to 24 VDC • 19.5 x 7.5 x 10.2 mm 2 WATT TMR 2WIN NEW 2 WATT • Regulated • 3.3 to 15 VDC • 4:1 Input 4.5 to 75 VDC • Remote On / Off • 21.8 x 9.3 x 11.2 mm 3 WATT TMR 3 3 WATT • Regulated • 3.3 to 15 VDC • 2:1 Input 4.5 to 75 VDC • Remote On / Off • 21.8 x 9.2 x 11.1 mm • Regulated, cost optimized • 3.3 to 15 VDC • 2:1 Input 4.5 to 75 VDC • Remote On / Off • (min. load required) • 21.8 x 9.3 x 11.2 mm 3 WATT 1 WATT • Unregulated • 3000 VDC I / O-isolation • 5.0 to 15 VDC • ±10 Input 5 to 24 VDC • 22 x 7.5 x 12.5 mm • Regulated • 3.3 to 15 VDC • 2:1 Input 4.5 to 75 VDC • Remote On / Off • 21.8 x 9.3 x 11.2 mm • Semi regulation (load) • 5.0 to 24 VDC • ±10 Input 5 to 24 VDC • 19.5 x 7.6 x 10.2 mm TMR 3HI TMV HI TRA 1 • Semi regulation (load) • 5.0 to 24 VDC • ±10 Input 5 to 24 VDC • 19.5 x 6.1 x 10.2 mm • Regulated • 5.0 to 24 VDC • 2:1 Input 4.5 to 75 VDC • 17 x 7.6 x 11 mm • Regulated, cost optimized • 3.3 to 12 VDC (single only) • 2:1 Input 4.5 to 75 VDC • Remote On / Off • (I / O-isoaltion 1000 VDC) • 21.8 x 9.3 x 11.2 mm TRA 3 1 WATT • Unregulated • 5200 VDC I / O-isolation • 5.0 to 15 VDC • ±10 Input 5 to 24 VDC • 19.5 x 7.1 x 10.2 mm • Semi regulation (load) • 3000 VDC I / O-isolation • 5.0 to 15 VDC (single only) • ±10 Input 5 to 24 VDC • 19.5 x 6.1 x 10.2 mm TMR 2E TME • Unregulated • Compact design • 5 to 24 (single only) • ±10 Input 5 to 24 VDC • 11.5 x 6.1 x 10.2 mm • Unregulated • 3000 VDC I / O-isolation • 5.0 to 15 VDC • ±10 Input 5 to 24 VDC • 19.5 x 6.1 x 10.2 mm TRV 1 • Single and dual output models (standard) • Operating temperature -40 – +85°C • 1500 VDC I / O-isolation (standard) • IT approval to IEC/ENUL 60950-1 (for regulated and high isolation converters) 3 WATT TMR 3WI • Regulated • 3.3 to 15 VDC • 4:1 Input 4.5 to 75 VDC • Remote On / Off • 21.8 x 9.2 x 11.1 mm 3 WATT DC / DC Converters TMR 6 PAGE 5 6 WATT • Regulated • 3.3 to 24 VDC • 2:1 Input 4.5 to 75 VDC • Remote On / Off • 21.8 x 9.1 x 11.2 mm TMR 8WI NEW TMR 6WI NEW 6 WATT • Regulated • 3.3 to 24 VDC • 4:1 Input 4.5 to 75 VDC • Remote On / Off • 21.8 x 9.1 x 11.2 mm TMR 8 NEW 8 WATT • Regulated • 3.3 to 24 VDC • 2:1 Input 4.5 to 75 VDC • Remote On / Off • 21.8 x 9.1 x 11.2 mm 8 WATT • Regulated • 3.3 to 24 VDC • 4:1 Input 4.5 to 75 VDC • Remote On / Off • 21.8 x 9.1 x 11.2 mm High Performance DC / DC Converters 2 – 60 Watt TEL 2 2 WATT • 3.3 to 15 VDC • 2:1 Input 4.5 to 75 VDC • EN 55022 class A filter • DIP-16 (23.8 x 13.7) TEM 3N NEW NEW 3 WATT • Compact design • Epoxy over mold • 5.0 to 15 VDC • 4:1 Input 4.5 to 75 VDC • 18.9 x 12.8 x 8.7 mm TEL 3 3 WATT 3 WATT THL 3WI TVN-5WI 3 WATT NEW • Ultra low ripple & noise • 3.3 to 24 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) 2 WATT TEN 3N NEW 3 WATT • Cost down redesign • 3.3 to 24 VDC • 2:1 Input 4.5 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) • 3.3 to 24 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • DIP-16 (23.8 x 13.7) 3 WATT TDR 2WI • Compact design • Epoxy over mold • 5.0 to 15 VDC • 4:1 Input 4.5 to 75 VDC • 18.9 x 12.8 x 8.7 mm • Cost optimized • 5.0 to 15 VDC • 2:1 Input 4.5 to 75 VDC • (min. load required) • DIP-24 (32 x 20.3) • Cost down redesign • 3.3 to 24 VDC • 4:1 Input 4.5 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) TDR 3WI 2 WATT • Compact design • Epoxy over mold • 5.0 to 15 VDC • 2:1 Input 4.5 to 75 VDC • 18.9 x 12.8 x 8.7 mm • Cost down redesign • 5.0 to 15 VDC • ±10 Input 5 to 24 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) TEN 3WIN TDR 2 • Fully regulated outputs • Single, dual (and triple) output models • 1500 VDC I / O-isolation (standard) • IT approval to IEC/ENUL 60950-1 • Operating temperature -40 – +85°C • Remote On / Off control TDR 3 3 WATT • Compact design • Epoxy over mold • 5.0 to 15 VDC • 2:1 Input 4.5 to 75 VDC • 18.9 x 12.8 x 8.7 mm 5 WATT TEL 5 • Cost optimized • 3.3 to 15 VDC • 2:1 Input 9 to 36 VDC • DIP-24 (32 x 20.3) 5 WATT DC / DC Converters TEN 6N PAGE 6 6 WATT • 3.3 to 24 VDC • 2:1 Input 9 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) TEN 8 8 WATT NEW 10 WATT 12 WATT 15 WATT • 3.3 to 15 VDC adjust. • 2:1 Input 9 to 75 VDC • EN 55022 class A filter • 1“ x 1“ NEW 10 WATT THD 12WI TEL 15 15 WATT THN 15 12 WATT THN 20WI • 3.3 to 15 VDC adjust. • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • 1“ x 1“ NEW 10 WATT THL 10WI 10 WATT THD 15N 15 WATT • 2.5 to 12 VDC • 2:1 Input 9 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) 15 WATT TON 15 15 WATT • 3.3 to 15 VDC adjust. • 2:1 Input 9 to 75 VDC • EN 55022 class A filter • 28.2 x 23.9 mm 15 WATT THN 15WI 15 WATT • 3.3 to 15 VDC adjust. • 4:1 Input 9 to 75 VDC • 1“ x 1“ • 3.3 to 15 VDC adjust. • 2:1 Input 9 to 75 VDC • 1“ x 1“ 20 WATT THD 10N • 3.3 to 24 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • 1“ x 1“ • Cost optimized • 3.3 to 15 VDC • 2:1 Input 9 to 75 VDC • 2“ x 1“ • 3.3 to 15 VDC adjust. • 4:1 Input 4.5 to 75 VDC • EN 55022 class A filter • 28.2 x 23.9 mm THN 20 THL 10 6 WATT • 3.3 to 15 VDC • 2:1 Input 9 to 75 VDC • DIP-24 (32 x 20.3) • 3.3 to 15 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) • 3.3 to 15 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) TON 15WI 8 WATT • 3.3 to 24 VDC • 2:1 Input 9 to 75 VDC • EN 55022 class A filter • 1“ x 1“ • 2.5 to 12 VDC • 2:1 Input 9 to 75 VDC • DIP-24 (32 x 20.3) THD 15WIN TEN 8WI TEN 6WIN HI • 3000 VDC I / O-isolatin • 3.3 to 24 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) • Railway approval • 3.3 to 15 VDC • 4:1 Input 9 to 160 VDC • Increased EMC immunity • DIP-24 (32 x 20.3) • 3.3 to 24 VDC • 4:1 Input 9 to 75 VDC • DIP-24 (32 x 20.3) THD 12 6 WATT • 3.3 to 24 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) • 3.3 to 15 VDC • 2:1 Input 9 to 75 VDC • DIP-24 (32 x 20.3) THD 10WIN TEN 6WIN 20 WATT THL 20WI • 3.3 to 24 VDC adjust. • 4:1 Input 9 to 75 VDC • 1“ x 1“ 20 WATT DC / DC Converters TEN 20 PAGE 7 20 WATT • 3.3 to 15 VDC • 2:1 Input 9 to 75 VDC • EN 55022 class A filter • 2“ x 1“ TMDC 20 NEW 20 WATT • 1.5 to 15 VDC adjust. • 2:1 Input 9 to 75 VDC • 2“ x 1“ • 3.3 to 24 VDC adjust. • 4:1 Input 9 to 75 VDC • 1“ x 1“ 40 WATT NEW NEW • 5.0 to 24 VDC adjust. • 2:1 Input 9 to 75 VDC • 2“ x 1“ 30 WATT TEN 40 40 WATT TEN 40WIN 40 WATT TEN 60WIN 50 WATT NEW • 5.0 to 24 VDC adjust. • 4:1 Input 9 to 75 VDC • 2“ x 1“ 25 WATT THN 30 30 WATT TEN 40WI 40 WATT TEN 40WIR 40 WATT • Railway approval • 3.3 to 24 VDC adjust. • 4:1 Input 9 to 160 VDC • Increased EMC immunity • 2“ x 1“ TEN 50WI 50 WATT • 3.3 to 24 VDC adjust. • 4:1 Input 9 to 75 VDC • (single output models only) • 2“ x 1“ • 5.0 to 24 VDC adjust. • 2:1 Input 9 to 75 VDC • 2“ x 1“ 60 WATT NEW • 3.3 to 15 VDC adjust. • 4:1 Input 9 to 75 VDC • Sense line • 2“ x 2“ 40 WATT TEN 50 THL 25WI • 3.3 to 24 VDC adjust. • 2:1 Input 9 to 75 VDC • 1“ x 1“ • 3.3 to 24 VDC adjust. • 4:1 Input 9 to 75 VDC • 2“ x 1“ • Chassis / DIN-rail • Screw terminal connection • 5.1 to 48 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • 112 x 64 x 25.6 mm TEN 60N TEN 30WIN 20 WATT • 3.3 to 15 VDC adjust. • 4:1 Input 9 to 75 VDC • 1“ x 1“ • With triple output models • 3.3 to 15 VDC adjust. • 2:1 Input 9 to 75 VDC • Sense line • 2“ x 2“ • 3.3 to 24 VDC adjust. • 2:1 Input 9 to 75 VDC • 2“ x 1“ TMDC 40 25 WATT • With triple output models • 1.5 to 15 VDC adjust. • 4:1 Input 9 to 75 VDC • 2“ x 1“ 30 WATT TEN 40N THL 25 TEN 20WIR • Railway approval • EN 55022 class B filter • 3.3 to 15 VDC adjust. • 4:1 Input 9 to 160 VDC • Increased EMC immunity • 2“ x 1“ • 3.3 to 15 VDC adjust. • 2:1 Input 9 to 75 VDC • 1“ x 1“ 30 WATT THN 30WI 20 WATT • 3.3 to 15 VDC adjust. • 4:1 Input 9 to 75 VDC • 2“ x 1“ • Chassis / DIN-rail • Screw terminal connection • 5.1 to 48 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • 96 x 54 x 23.3 mm TEN 30 TEN 20WIN 60 WATT TMDC 60 NEW • Chassis / DIN-rail • Screw terminal connection • 5.1 to 48 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • 112 x 68 x 38 mm 60 WATT DC / DC Converters PAGE 8 High Power DC / DC Converters 75 – 300 W TEP 75WI 75 WATT TEP 100 • Excellent thermal management • EN 55022 class A (chassis models) • Increased EMC immunity • Entire protective structure • Control functions • Wide selection of options 100 WATT TEP 100WIR NEW 100 WATT • Railway approval • 5.0 to 48 VDC adjust. • 4:1 Input 9 to 160 VDC • PCB / chassis / DIN-rail • 2.4“ x 2.3“ x 0.5“ • 3.3 to 48 VDC adjust. • 2:1 Input 9 to 75 VDC • PCB / chassis / DIN-rail • 2.4“ x 2.3“ x 0.5“ TEQ 100WIR NEW 100 WATT TEP 150WI • Railway approval • 85°C full load operation • 12 to 48 VDC adjust. • 4:1 Input 8.5 to 160 VDC • Chassis • 3“ x 4“ x 3.5“ • CV / CC for battery charging • Railway approval • 12 to 48 VDC adjust. • 4:1 Input 9 to 160 VDC • EN 55022 class B (opt.) • 90 x 65 x 38 mm • 12 to 48 VDC adjust. • 2:1 Input 16.5 to 75 VDC • PCB / chassis / DIN-rail • 2.4“ x 2.3“ x 0.5“ TEQ 160WIR NEW 160 WATT TEP 200WIR • Railway approval • 12 to 48 VDC adjust. • 4:1 Input 8.5 to 75 VDC • PCB / chassis / DIN-rail • 2.4“ x 2.3“ x 0.5“ • Railway approval • 75°C full load operation • 12 to 48 VDC adjust. • 4:1 Input 18 to 160 VDC • Chassis • 3“ x 4“ x 3.5“ • Railway approval • 12 to 48 VDC adjust. • 4:1 Input 8.5 to 75 VDC • Chassis / DIN-rail • 2.4“ x 3.4“ x 1.5“ TEQ 200WIR NEW 200 WATT TEQ 300WIR NEW 300 WATT • Railway approval • 70°C full load operation • 12 to 48 VDC adjust. • 4:1 Input 18 to 160 VDC • Chassis • 3“ x 4“ x 3.5“ • Railway approval • CV / CC for battery charging • 12 to 48 VDC adjust. • 4:1 Input 18 to 160 VDC • Chassis • 6“ x 4“ x 1.5“ TEP 160WIR 160 WATT • Railway approval • 12 to 48 VDC adjust. • 4:1 Input 9 to 160 VDC • PCB / chassis / DIN-rail • 2.4“ x 2.3“ x 0.5“ 150 WATT Medical / Reinforced I / O-Isolation DC / DC Converters 1 – 10 Watt TMV EN • Unregulated • 5.0 to 15 VDC • ±10 Input 5 to 24 VDC • (no 60601-1 approval) • SIP package • 22 x 7.5 x 12.5 mm 1 WATT TES 2M • Unregulated • 5.0 to 15 VDC • ±10 Input 5 to 24 VDC • SMD package • 24.0 x 13.7 x 9.3 mm TEP 160 160 WATT 200 WATT • IEC/ES 60601-1 3rd edition approval • I / O-isolation min. 3000 VACrms • Working voltage 300 VAC or higher • Operating temperature -40 – +85°C • EN 55022 class A for regulated models 2 WATT THI 2M • Unregulated • 5.0 to 15 VDC • ±10 Input 5 to 24 VDC • 28.0 x 13.7 x 8.6 mm 2 WATT DC / DC Converters THI 3 PAGE 9 NEW 3 WATT • Unregulated • 5.0 to 15 VDC • ±10 Input 5 to 24 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) THM 3WI THB 3 3 WATT • Regulated • 1000 Vrms working voltage • 5.0 to 24 VDC • 2:1 Input 4.5 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) NEW 3 WATT • Regulated • 2 x MOPP • 3.3 to 24 VDC • 4:1 Input 4.5 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) THB 6 10 WATT • Regulated • 5.0 to 15 VDC • 2:1 Input 9 to 75 VDC • EN 55022 class A filter • 2“ x 1“ THM 10WI 6 WATT NEW 12 – 60 WATT NEW • Low profile casing • 5.1 to 48 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • 112 x 68 x 38 mm NEW 6 WATT 10 WATT • Regulated • 2 x MOPP • 3.3 to 24 VDC • 4:1 Input 4.5 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) • Slim plastic casing • UL 508 approval • 5 to 24 VDC • 2:1 Input 9.5 to 75 VDC • EN 55022 class B filter • 75 x 100 x 27 / 45 mm TMDC 60 THM 6WI • Regulated • 2 x MOPP • 3.3 to 24 VDC • 4:1 Input 4.5 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) Industrial DIN-Rail Mount DC / DC Converters 12 – 60 Watt TCL DC 3 WATT • Regulated • 5.0 to 15 VDC • 4:1 Input 9 to 160 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) • Regulated • 1000 Vrms working voltage • 5.0 to 15 VDC • 2:1 Input 9 to 75 VDC • EN 55022 class A filter • DIP-24 (32 x 20.3) THB 10 THP 3 TMDC 20 • IEC / UL 60950 approvals • Increased EMC immunity NEW • Low profile casing • 5.1 to 48 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • 96 x 54 x 23.3 mm 60 WATT 20 WATT TMDC 40 NEW • Low profile casing • 5.1 to 48 VDC • 4:1 Input 9 to 75 VDC • EN 55022 class A filter • 112 x 64 x 25.6 mm 40 WATT DC / DC Converters PAGE 10 High Voltage DC / DC Converters up to 2 kV THV 180 – 2000 VDC • Slim SIP Package • 0-180 to 0-2000 VDC • 12 VDC • Remote On / Off • 80/110 x 12 x 20 mm PHV • Remote voltage programming 0 – 100% • Positive or negative polarity • Very low output ripple 180 – 2000 VDC • Flat DIP package • 0-350 to 0-2000 VDC • 12 VDC • Excellent voltage stability • Opt. flying lead connect. • 60 x 40 x 15/20 mm Industrial High Power Converters up to 22 kW TZL 60 – 300 WATT • Compact metal casing • 12 / 24 VDC • 2:1 Input 18 to 72 VDC • EN 55022 class B filter • Entire protection circuit • Many options available TSC 150 – 5000 WATT • 19“ plug in modules • 5 to 400 VDC • 2:1 Input 10 to 800 VDC • Individual power solutions TSC 19 5 kW – 22 kW • 19“ sub rack • 5 to 800 VDC • 2:1 Input 40 to 800 VDC • Individual power solutions DC / AC Converters Industrial Inverters TSD 200 VA – 30 kVA • 5 to 800 VDC • AC input for frequency conversion • Configurable for individual power solutions • 19“ plug in modules and sub racks • Single- / three-phase AC outputs • True sine wave output 40 – 400 Hz AC / DC Converters PAGE 11 Open Frame AC / DC Power supplies 60 – 200 Watt TOP 60 60 WATT • Single, dual and triple output models • 3.3 to 48 VDC • Protection class I • 2“ x 4“ TPI 150 NEW 150 WATT • Highest power density • Reinforced isolation • 12 to 48 VDC • ErP-ready • Adjustable output • 2“ x 4“ • Excellent thermal management • Universal input • EN 61000-3-2 compliant • IEC / UL 60950-1 approvals • Pin connection • EN 55022 class B filter TOP 100 100 WATT • 5.0 to 48 VDC • Protection class I & ll • Adjustable output • 2“ x 4“ TOP 200 200 WATT 2 WATT TMPS 03 • Universal input • Protection class ll • EN 55022 class B filter • IEC / UL 60950-1 approvals NEW • Standby module • Const. power, no current limit • 8 to 24 VDC • 3.3 or 5.0 VDC aux. output • ErP-ready • 36.5 x 28.4 x 15 • PCB mount • EN 60335-1 (household) • 3.3 to 24 VDC • ErP-ready • 1“ x 1“ (h = 15.3 mm) TMS TMPM 6 – 25 WATT • PCB / chassis • 5.0 to 24 VDC • Single / dual output • Mod. with cable clip connection • Chassis mount • Ind. EMC immunity • 3.3 to 48 VDC • Single, dual, triple • Protection class ll • UL 508 approval 100 WATT • 12 to 48 VDC • Protection class I & ll • Remote On / Off • 3“ x 5“ NEW TMP C NEW • Reinforced isolation • 12 to 48 VDC • ErP-ready • Protection class I & ll • Adjustable output • 2“ x 3“ Encapsulated AC / DC Power Modules 2 – 100 Watt TMSB 2 TPI 100 3 WATT TMLM • PCB mount • 3.3 to 24 VDC • Protection class ll • Compact design NEW 5 WATT • PCB mount • EN 60335-1 (household) • 3.3 to 24 VDC • ErP-ready • 1“ x 1“ (h = 15.3 mm) 4 – 10 WATT • PCB mount • Ind. EMC immunity • 3.3 to 24 VDC • ErP-ready • Compact design 15 – 60 WATT TMPS 05 TMP 7 – 60 WATT • PCB mount • Ind. EMC immunity • 3.3 to 48 VDC • Single, dual, triple • Protection class ll 4 – 20 WATT TML • PCB / chassis • Single, dual, triple • 3.3 to 24 VDC • Protection class I & ll 20 – 40 WATT AC / DC Converters TMT PAGE 12 10 – 50 WATT • PCB / chassis • Medical 2 x MOOP • 3.3 to 24 VDC • Single, dual, triple • Protection class ll • UL 508 approval (Chassis) TML 100C NEW TMM 24 – 60 WATT NEW • PCB mount • Medical 2 x MOPP • 5.0 to 48 VDC • Single / dual output • Protection class ll • Low profile 100 WATT • Chassis mount • Active PFC • 12 to 48 VDC • Protection class I & ll • 140 x 62 x 37 mm NEW TIW 4 – 24 WATT • IP67 casing w. flying leads • EN 60335-1 (household) • 3.3 to 24 VDC • ErP-ready • Mount. in flash boxes 40 WATT • Medical 2 x MOPP • Ind. EMC immunity • 5.0 to 48 VDC adjust. • ErP-ready • Protection class ll • 91 x 62 x 39 mm TPP 150 NEW • Universal input • EN 55022 class B filter • Ind. EMC immunity • International safety approval package TPP 65 NEW 65 WATT • Medical 2 x MOPP • Ind. EMC immunity • 5.0 to 48 VDC adjust. • ErP-ready • Protection class ll • 91 x 62 x 39 mm“ 150 WATT • Medical 2 x MOPP • Ind. EMC immunity • 12 to 48 VDC adjust. • ErP-ready • Protection class ll • 117 x 62 x 49 TXH TXM 120 – 480 WATT TXH 600 TPP 100 NEW 100 WATT • Medical 2 x MOPP • Ind. EMC immunity • 12 to 48 VDC adjust. • ErP-ready • Protection class ll • 91 x 62 x 39 mm 15 – 480 WATT • Cost optimized design • 3.3 to 48 VDC adjust. • ErP-ready (up to 75 W) • Protection class I • 3.3 to 48 VDC adjust. • Protection class I • Compact low profile 24 – 60 WATT NEW • Chassis mount • Medical 2 x MOPP • 5.0 to 48 VDC • Single / dual output • Protection class ll • UL 508 approval Metal Enclosure Power Supplies 15 – 1000 Watt TPP 40 TMM C NEW • Universal power supply • Active PFC • 12 to 54 adjust. • Ind. EMC immunity • IEC-C13 line socket • Signal & aux. Outputs TXL 15 – 1000 WATT • 3.3 to 48 VDC adjust. • Single, dual, triple • Protection class I 600 WATT TEX • Outdoor power supply • All weather proof (IP67) • 12 / 24 VDC • Ind. EMC immunity • UL 508 • IECEx / Atex 120 WATT AC / DC Converters PAGE 13 DIN-Rail Power Supplies 15 – 960 Watt TMP C 15 – 60 WATT • Fully encapsulated • 3.3 to 48 VDC • Single, dual, triple • Protection class ll • Low profile TCL 24 – 240 WATT 72 – 600 WATT • Rugged metal casing • 12 to 48 VDC adjust. • IECEx / Atex (opt.) • Entire control signals TIS 24 – 60 WATT NEW • Medical 2 x MOPP • Fully encapsulated • 5.0 to 48 VDC • Single / dual output • Protection class ll • Low profile • Slim plastic casing • 5.0 to 48 VDC adjust. • Protection Class I • Screw or spring clamp connection TSP TMM C • Universal input • EN 55022 class B filter • International safety approval package • Low profile metal casing • 12 to 72 VDC adjust • Int. function modules • (auto range input) 15 – 150 WATT • Low profile plastic casing • For distribution board installation • 5.0 to 24 VDC • Protection class ll • NEC class II (up to 90 W) TPC 30 – 120 WATT TSPC 80 – 400 WATT • Robust plastic casing • 5.0 to 48 VDC adjust. • ErP-ready • DC-OK signal • Rugged metal casing • 12 to 48 VDC adjust. • IECEx / Atex • DC-OK signal TSP 3P TSP WR 240 – 960 WATT • Rugged metal casing • 3-phase input • 24 VDC adjust • High efficiency up to 92% • IECEx / Atex • 200% boost power 50 – 600 WATT TBL TFP NEW 250 – 750 WATT • Low profile metal casing • 150% boost power • 24 VDC adjust • Efficiency up to 92% • IECEx / Atex • Entire control signals 180 – 600 WATT • Rugged metal casing • 24 VDC adjust • Wide input 85 to 550 VAC • Entire control signals DIN-RAIL MOUNT SYSTEM SOLUTIONS PAGE 14 UPS Systems TBL BC • Power Supplies with integrated battery controller modules • Deep discharge protection • Battery temperature supervision • Battery test functions • Entire control signals 60 WATT • Low profile plastic casing • 24 VDC output • Use with 24 VDC battery pack TSPC 240UPS NEW 240 WATT • Rugged metal casing • 24 VDC output • Use with 12 VDC battery • Tight output regulation in power fail mode Battery Controller Modules / Battery Pack • Deep discharge protection • Battery temperature supervision • Battery test functions • Entire control signals TSP BCMU360 NEW 360 WATT TSP BCM • Universal module • For 24 & 48 VDC • Use with 12 VDC battery • No remote link to PS • Rugged metal casing • TSP Series access. module • For 24 VDC • Use with 24 VDC battery pack • Rugged metal casing Buffer Module TSP BFM • Universal module • For 24 VDC • 5 Ws buffer energy • No remote link to PS 12 – 48 VDC TSP BAT • Battery packs • High quality lead acid • 12 VDC / 7.2 Ah • 24 VDC 1.2 to 12 Ah • Buffers short time mains black-outs and voltage dips • No external battery required • Entire control signals 600 WATT DIN-RAIL MOUNT SYSTEM SOLUTIONS PAGE 15 Decoupling and Current Share Modules TSPC DCM 600 WATT • Universal module • For 5 – 28 VDC • 2 x 25 A – 50 A out max. • No remote link to PS • (no signal outputs) • Rugged metal casing TSP REM 360 – 600 WATT • TSP series access modules • Active current sharing • For 24 VDC, 2 inputs • Alarm signal • Remote On / Off • Rugged metal casing TPC REM • TPC series access modules • Active current sharing • For 24 or 48 VDC models • 2 Inputs, 240 W • DC-OK signal output • Robust plastic casing • For 2 units in redundant and parallel operation • International safety approval package 240 WATT TCL REM • Universal module • For 5 – 60 VDC • 2 x 5 A – 10 A out max. • No remote link to PS • (no signal outputs) • Slim plastic casing 480 WATT TRACO ELECTRONIC AG – dedicated to design and produce state-of-the-art AC / DC and DC / DC power conversion products of high industrial quality. Our mission is to provide optimal power supply solutions in terms of performance, quality, cost and functionality for specific applications. Our commitment to quality is supported by a 3 year product warranty for all products. TRACO POWER is the registered trademark under which our products are marketed worldwide. Traco Electronic AG Sihlbruggstrasse 111 6340 Baar Switzerland T +41 43 311 45 11 F +41 43 311 45 45 [email protected] tracopower.com