TOKEN TPSPA High Saturation Power Inductors High Saturation Inductors Power Inductors Surface Mount High Saturation Power Wirewound Inductors - TPSPA Series Preview Token Power Inductor Enhances Low DCR High Saturation Current With Up To 1MHz High Frequency. Token’s (TPSPA) inductor features high saturation current and low direct current resistance (DCR) in a rugged surface-mount package. Available in three industry-standard footprint (6.8 mm x 7.1 mm), (10.5 mm x 11.5 mm), and (12.8 mm x 13.2 mm) with a profile from 3.0 mm to 6.5 mm maximum, the TPSPA series inductors use an advanced core material that operating temperature range from -25°C to +125°C, and are said to provide the lowest DCR of any inductor in this size and profile. These high saturation current inductors are suitable for use in voltage regulator module applications in desktop computers, notebook computers, point-of-load converters, workstations and servers as well as DC-DC applications, and other high-power, high-density, high-ambient temperature applications. Token (TPSPA) series provides a high peak saturation current and a maximum operating current rating that enables the inductors to handle the high current requirements of microprocessors with significant saturation margin. The series also offers a saturation current range from 2.25 A up to 120 A, heat rating current from 2.9 A to 60 A, typical DCR from 0.47 mΩ to 249.0 mΩ, and maximum DCR from 0.50 mΩ to 270 mΩ, which results in lower copper losses and maximizes the current rating for higher component performance and system efficiency. The inductance values range from 0.1μH to 100μH. The (TPSPA) inductors are RoHS compliant and meet standard EIA481 requirements. Custom parts are available on request. Token will also produce devices outside these specifications to meet specific customer requirements, please contact our sales for more information. Features : - Low Profile: 3.0mm ~ 6.5mm. - Low DCR, SMT Power Inductor. - For Large Current Use: 10 amp ~ 60 amp. - High Frequency (up to 1MHz). Applications : - DC-DC converter or VRM applications. - Notebook, Laptop Computer, Graphic Card, VGA Module. - Thin type on-board power supply module for exchanger. - Inductor for general purpose use. Version 2010 http://www.token.com.tw/ rfq token.com.tw 01 of 11 TOKEN TPSPA High Saturation Power Inductors Dimensions & Configurations (TPSPA) A D C E B Type TPSPA0603 TPSPA0603A TPSPA1040 TPSPA1040A TPSPA1040B TPSPA1040C TPSPA1235 TPSPA1240 TPSPA1250 TPSPA1265 02 of 11 A 6.8max 6.8max 10.5 ± 0.5 10.5 ± 0.5 10.5 ± 0.5 10.5 ± 0.5 12.8 ± 0.5 12.8 ± 0.5 12.8 ± 0.5 12.8 ± 0.5 B 7.1 ± 0.3 7.1 ± 0.3 11.5 ± 1.0 11.5 ± 1.0 11.5 ± 1.0 11.5 ± 1.0 13.2 ± 1.0 13.2 ± 1.0 13.2 ± 1.0 13.2 ± 1.0 http://www.token.com.tw/ C 3.0 max. 3.0 max. 4.0 max. 4.0 max. 4.0 max. 4.0 max. 3.5 max. 4.0 max. 5.0 max. 6.5 max. D 3.0 ± 0.3 3.0 ± 0.3 3.0 ref. 2.5 ref. 3.0 ref. 3.0 ref. 3.8 ref. 3.8 ref. 3.8 ref. 3.8 ref. rfq token.com.tw E 1.6 ± 0.3 1.6 ± 0.3 2.3 ref. 2.3 ref. 2.3 ref. 2.3 ref. 2.5 ref. 2.5 ref. 2.5 ref. 2.5 ref. Version 2010 TOKEN TPSPA High Saturation Power Inductors Electrical Characteristics (TPSPA0603) Part Number TPSPA-0603-R10M TPSPA-0603-R15M TPSPA-0603-R20M TPSPA-0603-R22M TPSPA-0603-R33M TPSPA-0603-R47M TPSPA-0603-R68M TPSPA-0603-R82M TPSPA-0603-1R0M TPSPA-0603-1R5M TPSPA-0603-2R2M TPSPA-0603-3R3M TPSPA-0603-4R7M TPSPA-0603-6R8M TPSPA-0603-8R2M TPSPA-0603-100M Note : L0 Inductance (µH) ±20% @0A 0.10 0.15 0.20 0.22 0.33 0.47 0.68 0.82 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10.0 DCR (mΩ) (Typical) (Max) 1.5 1.7 1.9 2.5 2.4 3.0 2.5 2.8 3.5 3.9 4.0 4.2 5.0 5.5 6.7 8.0 9 10.0 14 15.0 18 20.0 28 30.0 37 40.0 54 60.0 64 68.0 102 105.0 Heat Rating Current Idc (mA) Typical 32.5 26 24 23 20 17.5 15.5 13 11 9 8 6 5.5 4.5 4 3 Saturation Current Isat (mA) Typical 60 52 41 40 30 26 25 24 22 18 14 13.5 10 8 7.5 7 All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. Version 2010 http://www.token.com.tw/ rfq token.com.tw 03 of 11 TOKEN TPSPA High Saturation Power Inductors Electrical Characteristics (TPSPA0603A) Part Number L0 Inductance (µH) ±20% @0A TPSPA-0603A-1R0M TPSPA-0603A-1R5M TPSPA-0603A-2R2M TPSPA-0603A-3R3M TPSPA-0603A-4R7M TPSPA-0603A-6R8M TPSPA-0603A-8R2M TPSPA-0603A-100M TPSPA-0603A-220M 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10.0 22.0 Note : DCR (mΩ) (Typical) (Max) 7.6 8.0 11.7 12.5 15.7 16.5 24.8 26.0 31.8 33.4 44.6 46.8 52.3 54.9 67.8 71.2 128.9 135.0 Heat Rating Current Idc (mA) Typical Saturation Current Isat (mA) Typical 12.5 10.5 9.0 7.0 6.0 5.5 5.0 4.0 2.9 9.5 8.0 7.0 6.5 4.0 4.0 4.0 3.5 2.5 Heat Rating Current Idc (mA) Typical Saturation Current Isat (mA) Typical 44 38 35 32 30 25 25 20 15 14 44 38 35 32 30 30 25 20 15 14 All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. Electrical Characteristics (TPSPA1040) Part Number TPSPA-1040-R19M TPSPA-1040-R24M TPSPA-1040-R36M TPSPA-1040-R47M TPSPA-1040-R56M TPSPA-1040-R68M TPSPA-1040-R78M TPSPA-1040-1R0M TPSPA-1040-1R8M TPSPA-1040-2R0M Note : L0 Inductance (µH) ±20% @0A 0.19 0.24 0.36 0.47 0.56 0.68 0.78 1.0 1.8 2.0 DCR (mΩ) (Typical) (Max) 0.50 0.60 0.70 0.80 0.85 0.95 1.20 1.40 1.25 1.35 1.60 1.80 1.60 1.70 2.20 2.50 4.50 5.00 5.20 5.80 All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. 04 of 11 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TPSPA High Saturation Power Inductors Electrical Characteristics (TPSPA1040A) Part Number L0 Inductance (µH) ±20% @0A TPSPA-1040A-R19M TPSPA-1040A-R22M TPSPA-1040A-R36M TPSPA-1040A-R47M TPSPA-1040A-R56M TPSPA-1040A-R68M TPSPA-1040A-1R0M TPSPA-1040A-1R5M TPSPA-1040A-2R5M 0.19 0.22 0.36 0.47 0.56 0.68 1.0 1.5 2.5 Note : DCR (mΩ) (Typical) (Max) 0.70 0.80 0.60 0.80 1.10 1.20 1.50 1.70 1.60 1.70 1.60 1.80 2.80 3.20 4.50 5.00 8.50 9.50 Heat Rating Current Idc (mA) Typical Saturation Current Isat (mA) Typical 38 38 30 28 25 25 21 15 13 60 50 50 45 40 30 30 20 18 Heat Rating Current Idc (mA) Typical Saturation Current Isat (mA) Typical All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. Electrical Characteristics (TPSPA1040B) Part Number TPSPA-1040B-R19M TPSPA-1040B-R36M TPSPA-1040B-R56M TPSPA-1040B-1R0M TPSPA-1040B-1R5M TPSPA-1040B-2R2M TPSPA-1040B-3R3M TPSPA-1040B-4R7M TPSPA-1040B-5R6M TPSPA-1040B-6R8M TPSPA-1040B-8R2M TPSPA-1040B-100M Note : L0 Inductance (µH) ±20% @0A 0.19 0.36 0.56 1.0 1.5 2.2 3.3 4.7 5.6 6.8 8.2 10 DCR (mΩ) (Typical) (Max) 0.875 0.95 1.30 1.40 1.70 1.80 3.70 4.10 5.30 5.80 8.20 9.00 10.80 11.80 15.00 16.50 17.60 19.30 21.20 23.30 31.00 34.00 33.20 36.50 40 31.5 27.5 17.5 15 12 10 9.5 8.5 8.0 7.0 6.8 90 60 49 36 27.5 25.5 18.6 17 16 13.5 12.5 12 All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. Version 2010 http://www.token.com.tw/ rfq token.com.tw 05 of 11 TOKEN TPSPA High Saturation Power Inductors Electrical Characteristics (TPSPA1040C) Part Number L0 Inductance (µH) ±20% @0A TPSPA-1040C-R19M TPSPA-1040C-R24M TPSPA-1040C-R36M TPSPA-1040C-R47M TPSPA-1040C-R56M TPSPA-1040C-R78M TPSPA-1040C-1R0M TPSPA-1040C-1R8M TPSPA-1040C-2R0M TPSPA-1040C-4R7M TPSPA-1040C-6R8M TPSPA-1040C-100M TPSPA-1040C-150M TPSPA-1040C-220M TPSPA-1040C-330M TPSPA-1040C-470M TPSPA-1040C-101M 0.19 0.24 0.36 0.47 0.56 0.78 1.0 1.8 2.0 4.7 6.8 10 15 22 33 47 100 Note : DCR (mΩ) (Typical) (Max) 0.70 0.80 0.85 0.95 1.05 1.15 1.53 1.68 1.60 1.80 1.80 1.90 2.30 2.50 4.50 5.00 5.20 5.80 12.90 14.20 17.50 19.30 27.80 30.50 40.90 45.00 60.40 66.00 87.50 94.50 132.0 145.0 249.0 270.0 Heat Rating Current Idc (mA) Typical Saturation Current Isat (mA) Typical 40.0 33 32 30 32 27 25 17 16 9.5 9.0 7.5 6.25 5.0 4.4 4.0 3.00 46 44 30 30 22 22 20 16 14 7.6 7.5 7.1 6.0 4.5 4.0 3.0 2.25 All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. 06 of 11 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TPSPA High Saturation Power Inductors Electrical Characteristics (TPSPA1235) Part Number L0 Inductance (µH) ±20% @0A TPSPA-1235-R10M TPSPA-1235-R15M TPSPA-1235-R22M TPSPA-1235-R33M TPSPA-1235-R47M TPSPA-1235-R60M TPSPA-1235-R68M TPSPA-1235-R82M TPSPA-1235-1R0M TPSPA-1235-1R5M TPSPA-1235-1R8M TPSPA-1235-2R2M TPSPA-1235-3R3M TPSPA-1235-4R7M TPSPA-1235-5R6M TPSPA-1235-6R8M TPSPA-1235-8R2M TPSPA-1235-100M 0.10 0.15 0.22 0.33 0.47 0.60 0.68 0.82 1.0 1.5 1.8 2.2 3.3 4.7 5.6 6.8 8.2 10 Note : DCR (mΩ) (Typical) (Max) 0.8 0.96 1.0 1.2 1.1 1.3 1.3 1.5 1.6 2.0 1.8 2.2 2.3 2.5 2.6 3.0 3.3 3.5 5.1 5.5 6.5 7.0 7.2 8.0 11.0 12.0 14.3 15.0 17.1 18.0 19.8 22.0 24.8 28.0 30.4 34.0 Heat Rating Current Idc (mA) Typical Saturation Current Isat (mA) Typical 43 41 38.5 36.5 32 29 28 25 24 19 16.5 16 12 10 9.5 9 8.5 7 84 75 65 62 55 51 49 44 40 35 30 29 27 24 19 18 16 14 All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. Version 2010 http://www.token.com.tw/ rfq token.com.tw 07 of 11 TOKEN TPSPA High Saturation Power Inductors Electrical Characteristics (TPSPA1240) Part Number TPSPA-1240-R10M TPSPA-1240-R22M TPSPA-1240-R33M TPSPA-1240-R47M TPSPA-1240-R60M TPSPA-1240-R68M TPSPA-1240-R82M TPSPA-1240-0R9M TPSPA-1240-1R0M TPSPA-1240-1R2M TPSPA-1240-1R5M TPSPA-1240-1R8M TPSPA-1240-2R2M TPSPA-1240-3R3M TPSPA-1240-4R7M Note : L0 Inductance (µH) ±20% @0A 0.10 0.22 0.33 0.47 0.60 0.68 0.82 0.9 1.0 1.2 1.5 1.8 2.2 3.3 4.7 DCR (mΩ) (Typical) (Max) 0.90 1.10 1.20 1.40 1.30 1.50 1.40 1.90 2.00 2.30 2.10 2.50 2.70 3.10 3.00 3.50 3.00 3.70 3.00 3.70 5.50 6.00 6.40 7.60 6.40 7.60 7.50 8.40 10.50 12.00 Heat Rating Current Idc (mA) Typical Saturation Current Isat (mA) Typical 43 41 38 32 30 28 25 24 24 20 19 16 16 14 11 75 70 60 55 50 46 44 40 38 25 30 26 22 20 15 All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. 08 of 11 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TPSPA High Saturation Power Inductors Electrical Characteristics (TPSPA1250) Part Number L0 Inductance (µH) ±20% @0A TPSPA-1250-R10M TPSPA-1250-R22M TPSPA-1250-R33M TPSPA-1250-R47M TPSPA-1250-R56M TPSPA-1250-R68M TPSPA-1250-R82M TPSPA-1250-1R0M TPSPA-1250-1R2M TPSPA-1250-1R5M TPSPA-1250-1R8M TPSPA-1250-2R2M TPSPA-1250-3R3M TPSPA-1250-4R7M TPSPA-1250-5R6M TPSPA-1250-6R8M TPSPA-1250-7R8M TPSPA-1250-8R2M TPSPA-1250-100M 0.10 0.22 0.33 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 3.3 4.7 5.6 6.8 7.8 8.2 10 DCR (mΩ) (Typical) (Max) 0.53 0.60 0.64 0.80 0.85 1.10 1.10 1.30 1.30 1.50 1.50 1.70 2.00 2.30 2.10 2.50 2.80 3.50 3.40 4.10 4.20 4.90 4.60 5.50 7.70 9.20 12.8 15.0 14.0 16.5 15.4 18.5 17.2 20.5 18.9 22.5 21.4 25.5 Heat Rating Current Idc (mA) Typical Saturation Current Isat (mA) Typical 55 51 42 38 36 34 31 29 25 23 19 20 15 12 11.5 11 10 9.5 9 118 110 80 65 55 54 53 50 49 48 40 32 32 27 22 21 18 18 16 Note : All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. Version 2010 http://www.token.com.tw/ rfq token.com.tw 09 of 11 TOKEN TPSPA High Saturation Power Inductors Electrical Characteristics (TPSPA1265) Part Number L0 Inductance (µH) ±20% @0A TPSPA-1265-R10M TPSPA-1265-R15M TPSPA-1265-R22M TPSPA-1265-R30M TPSPA-1265-R33M TPSPA-1265-R40M TPSPA-1265-R47M TPSPA-1265-R56M TPSPA-1265-R68M TPSPA-1265-R82M TPSPA-1265-1R0M TPSPA-1265-1R2M TPSPA-1265-1R5M TPSPA-1265-1R8M TPSPA-1265-2R2M TPSPA-1265-3R3M TPSPA-1265-4R7M TPSPA-1265-5R6M TPSPA-1265-6R8M TPSPA-1265-8R2M TPSPA-1265-100M 0.10 0.15 0.22 0.30 0.33 0.40 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 3.3 4.7 5.6 6.8 8.2 10 Note : DCR (mΩ) (Typical) (Max) 0.47 0.50 0.53 0.60 0.63 0.70 0.70 0.80 0.83 0.90 0.90 1.00 1.00 1.20 1.20 1.40 1.40 1.60 1.60 1.90 1.70 2.00 2.10 2.50 2.50 3.00 2.80 3.20 3.50 4.20 5.70 6.80 9.30 11.2 9.30 10.0 13.1 14.0 14.5 15.5 15.8 16.8 Heat Rating Current Idc (mA) Typical Saturation Current Isat (mA) Typical 60 55 53 48 46 44 41 37 35 33 32 30 27 24 22 18 13.5 13.5 11.5 10.5 10 120 118 112 72 65 64 63 62 60 50 49 48 45 41 40 35 30 26.5 16.5 16.0 15.5 All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. 10 of 11 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TPSPA High Saturation Power Inductors How to Order TPSPA 1265 R10 M Part Number: TPSPA Size (L×M)(mm) Code 0603 0603A 1040 1040A 1040B 1040C 1235 1240 1250 1265 Size 6.8×7.1 6.8×7.1 10.5×11.5 10.5×11.5 10.5×11.5 10.5×11.5 12.8×13.2 12.8×13.2 12.8×13.2 12.8×13.2 Inductance Code R10 1R0 Inductance 0.10µH 1.00µH Tolerance Code M Tolerance 20% Back to 1st Page - High Saturation Inductors / Power Inductors (TPSPA) Version 2010 http://www.token.com.tw/ rfq token.com.tw 11 of 11