06057 DFN-8 PACKAGE Only One Name Means ProTek’Tion™ package outline & pad layout P1 outline dimensions dim millimeters min max min max P1 1.95 2.05 0.077 0.081 P2 1.95 2.05 0.077 0.081 P3 0.75 0.85 0.029 0.033 L1 0.23 0.30 0.009 0.012 L2 0.33 0.40 0.013 0.016 L3 0.18 0.23 0.007 0.009 p 0.50 BSC p inches P2 1.15 1.25 0.045 0.049 G2 0.55 0.65 0.022 0.026 L2 G2 G1 BOTTOM VIEW TOP VIEW 0.020 BSC G1 L1 P3 SIDE VIEW L3 NOTEs END VIEW 1. Controlling dimension: millimeters. 2. Dimensioning and tolerances per ANSI Y14.M, 1985. 3. Coplanarity applies to the exposed pad as well as the terminals. dim millimeters inches min max min max A 2.10 2.20 0.083 0.087 B 2.10 2.20 0.083 0.087 C 0.50 BSC G C pad layout dimensions F B E D 0.020 BSC D 0.55 0.65 0.022 0.026 E 1.15 1.25 0.045 0.049 F 0.45 0.50 0.018 0.020 G 0.25 0.35 0.010 0.014 A NOTES 1. Controlling dimension: millimeters. 06057.R3 3/11 Page 1 www.protekdevices.com 06057 DFN-8 PACKAGE Only One Name Means ProTek’Tion™ tape & reel specifications D t Top Cover Tape P2 10 Pitches Cumulative Tolerance on tape ± 0.2 E P0 A0 F B0 K0 W Pin 1 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 2.30 ± 0.10 2.30 ± 0.10 0.95 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 tmax 0.25 Notes 1. Dimensions are in millimeters. 2. Surface mount product is taped and reeled in accordance with EIA-481. 3. Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape. 06057.R3 3/11 Page 2 www.protekdevices.com 06057 DFN-8 PACKAGE Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 06057.R3 3/11 Page 3 www.protekdevices.com