PLR3304 - ProTek Devices

05273
PLR3304
Only One Name Means ProTek’Tion™
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY
DESCRIPTION
The PLR3304 is an ultra low capacitance steering diode/TVS array. This device is designed to protect computing
applications such as gigabit Ethernet, USb and DVI interfaces as well as telecommunication equipment and systems.
The PLR3304 is available in the space-saving DFN-10 package configuration and is rated at 400 Watts peak pulse current (8/20µs waveshape).
This device meets the IEC 61000-4-2 (ESD), 61000-4-4 (EFT) and 61000-4-5 (Surge) requirements. At higher operating frequencies or faster edge rates, insertion loss and signal integrity are a major concern. This device in conjunction with passive components integrated into a TVS/filter network can be used for EMI/RFI protection.
DFN-10 PACKAGE
FEATURES
APPLICATIONS
• Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
• Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns
• Compatible with IEC 61000-4-5 (Surge)
• 400 Watts Peak Pulse Power per Line(tp = 8/20µs)
• ESD Protection > 25 kilovolts
• Low Clamping Voltage
• Unidirectional Configuration
• Protects 4 I/O Ports & Power Supply
• Ultra Low Capacitance : 4pF
• RoHS Compliant
• REACH Compliant
• Gigabit Ethernet
• T1/E1, T3/E3 Chip Side Protection
• Wireless Communications
• USB & DVI Interfaces
MECHANICAL CHARACTERISTICS
• Molded JEDEC DFN-10 Package
• Approximate Weight: 7 milligrams
• Lead-Free Pure-Tin Plating (Annealed)
• Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• 8mm Tape and Reel Per EIA Standard 481
• Flammability Rating UL 94V-0
CIRCUIT DIAGRAM & PIN CONFIGURATION
I/O
1
NC I/O
2
3
NC Vcc
4
5
7
6
Pin 5
Pin 1
Pin 9
Pin 3
GND
Pin 7
Gnd
10
9
NC I/O
05273.R9 11/14
Page 1
8
NC I/O NC
www.protekdevices.com
05273
PLR3304
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
Peak Pulse Power (tp = 8/20µs) - See Figure 1
Operating Temperature
SYMBOL
VALUE
UNITS
PPP
400
Watts
TL
-55 to 150
°C
Storage Temperature
TSTG
-55 to 150
°C
Peak Pulse Current (Pin 5 to ground) - 8/20µs
IPP
18
Amps
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
PLR3304
DEVICE
MARKING
334
RATED
STAND-OFF
VOLTAGE
MINIMUM
SNAP-BACK
VOLTAGE
MINIMUM
PUNCH
THROUGH
VOLTAGE
VWM
VOLTS
@ 50mA
V(SB)
VOLTS
3.3
3.3
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
(Note 1)
@ I P = 10A
VC
VOLTS
MAXIMUM
LEAKAGE
CURRENT
TYPICAL
CAPACITANCE
I/O TO GND
@ 5µA
V(PT)
VOLTS
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
(Note 1)
@ I P = 1A
VC
VOLTS
@V WM
ID
µA
@0V, 1MHz
C
pF
3.5
5.5
10.0
1.0
4.0
NOTE
1. Pin 5 to ground.
05273.R9 11/14
Page 2
www.protekdevices.com
05273
PLR3304
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
FIGURE 1
PEAK PULSE POWER VS PULSE TIME
PPP - Peak Pulse Power - Watts
10,000
1,000
400W, 8/20µs Waveform
100
10
0.1
10
100
td - Pulse Duration - µs
Peak Value IPP
80
100
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
e-t
60
40
10,000
FIGURE 3
POWER DERATING CURVE
Peak Pulse Power
8/20µs
80
% Of Rated Power
tf
100
td = t/(IPP/2)
60
40
20
20
0
1,000
FIGURE 2
PULSE WAVE FORM
120
IPP - Peak Pulse Current - % of IPP
1
0
05273.R9 11/14
5
10
15
t - Time - µs
20
25
0
30
Page 3
Average Power
0
25
50
75 100 125
TA - Ambient Temperature - °C
150
www.protekdevices.com
05273
PLR3304
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
FIGURE 4
OVERSHOOT & CLAMPING VOLTAGE
20
5 Volts per Division
10
0
-10
-20
ESD Test Pulse - 25 kilovolt, 1/30ns (Waveshape)
FIGURE 5
TYPICAL REVERSE VOLTAGE VS CAPACITANCE
5
C - Capacitance - pF
4
3
2
0
05273.R9 11/14
0
1
2
3
VR - Reverse Voltage - Volts
Page 4
4
5
www.protekdevices.com
05273
PLR3304
Only One Name Means ProTek’Tion™
DFN-10 PACKAGE INFORMATION
D
OUTLINE DIMENSIONS
DIM
A
MILLIMETERS
MIN
MAX
MIN
MAX
0.45
0.55
0.017
0.021
A2
0.13 BSC
e
INCHES
1
E
0.005 BSC
D
2.50
2.70
0.097
0.105
D2
2.10
2.20
0.083
0.085
Pin 1 Reference
E
2.50
2.70
0.097
0.105
TOP VIEW
E2
1.21
1.31
0.046
0.051
e
0.50 BSC
0.020 BSC
L
0.35
0.45
0.013
0.017
M
0.25
0.45
0.010
0.018
5
D2
M
E2
L
10
6
BOTTOM VIEW
A2
A
SIDE VIEW
NOTES
1. Controlling dimension: millimeters.
2. Dimensioning and tolerances per ANSI Y14.M, 1985.
3. Coplanarity applies to the exposed pad as well as the terminals.
G
A
PAD LAYOUT DIMENSIONS
DIM
MILLIMETERS
INCHES
NOMINAL
NOMINAL
A
2.25
0.089
B
1.42
0.056
C
2.90
0.114
D
0.50 BSC
0.020 BSC
E
0.30
0.012
F
0.58
0.023
G
2.15
0.084
B C
F
E
D
NOTES
1. Controlling dimension: millimeters.
05273.R9 11/14
Page 5
www.protekdevices.com
05273
PLR3304
Only One Name Means ProTek’Tion™
TAPE AND REEL
D
t
Top Cover
Tape
P2
10 Pitches Cumulative
Tolerance on tape ± 0.2
E
P0
A0
F
B0
K0
W
Pin 1
P
User Direction of Feed
SPECIFICATIONS
REEL DIA.
TAPE
WIDTH
178mm (7”)
8mm
A0
B0
K0
D
E
F
W
P0
P2
P
2.90 ± 0.10 2.90 ± 0.10 0.80 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10
tmax
0.25
NOTES
1.
2.
3.
4.
Dimensions are in millimeters.
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape.
Marking on Part - marking code (see page 2) and polarity dot.
ORDERING INFORMATION
BASE PART NUMBER
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE QTY
PLR3304
-LF
-T73
3,000
7”
n/a
This device is only available in a Lead-Free configuration.
05273.R9 11/14
Page 6
www.protekdevices.com
05273
PLR3304
Only One Name Means ProTek’Tion™
COMPANY INFORMATION
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering
diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and
overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They
include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Marketing: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By E-mail:
Asia Sales: [email protected]
Europe Sales: [email protected]
U.S. Sales: [email protected]
Distributor Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
ProTek Devices (Asia Pacific) Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2006 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05273.R9 11/14
Page 7
www.protekdevices.com