704 Series - ProTek Devices

05021
704-15K36 - 704-15K36T
Only One Name Means ProTek’Tion™
HIGH POWER AIRCRAFT/ VEHCILE DC BUS VOLTAGE SUPPRESSOR
RTCA DO-160G COMPLIANT PRODUCT
DESCRIPTION
The 704-15K36 and 704-15K36T are 15 kilowatt silicon transient voltage suppressors (TVS) designed for use primarily in
28 Volt aircraft applications in accordance with MIL-STD-704 and MIL-STD-19500. These assemblies typically operate
with a minimum source impedance of 0.25 Ohms.
These devices have a peak pulse power rating of 15,000 Watts for a 1 ms waveshape and therefore can be used in
applications where induced lightning on rural or remote transmission lines present a hazard to electronic circuitry. The
704-15K36 is designed for high current short peak pulse transient applications, where as the 704-15K36T is designed
for extended peak pulse transients greater than 1 millisecond.
704 PACKAGE
This series can be screened upon request for military requirements in accordance with MIL-PRF-19500 (applicable
tests).
704T PACKAGE
FEATURES
APPLICATIONS
• RTCA DO-160G COMPLIANT PRODUCT
• Meets MIL-STD-704
• 15 kilowatts Peak Pulse Power per Line (tp = 10/1000µs)
• Each Device 100% Tested
• 28 Volt Power Supply Protection
• DC Power Supply Protection
• MIL-STD-704 Power Bus Protection
MECHANICAL CHARACTERISTICS
• Molded Plastic Case
• 704-15K36 Approximate Weight: 38 grams
• 704-15K36T Approximate Weight: 65 grams
• Flammability Rating UL 94V-0
• Military Screening Available Upon Request for IAW MIL-PRF-19500
• Standard Screening Available Upon Request:
H1 - Submodule Screening (Test Plans 05231 & 05232)
H2 - Submodule & Module Screening (Test Plan 05233)
H3 - Submodule & Module Screening with Group B & C Lot Testing (Test Plans 05234 & 05235)
A Warranty Disclaimer is required for the purchase of this part. Contact Customer Service for more information.
05021.R13 9/15
Page 1
www.protekdevices.com
05021
704-15K36 - 704-15K36T
Only One Name Means ProTek’Tion™
RTCA DO-160G COMPLIANT PRODUCT
TYPICAL DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
Peak Pulse Power (tp = 10/1000) - See Figure 1
Operating Temperature
SYMBOL
VALUE
UNITS
PPP
15
kilowatts
TL
-55 to 150
°C
Storage Temperature
TSTG
-55 to 150
°C
Steady State Power Dissipation @ 50°C
TA
10.0
Watts
Forward Surge Rating @ 25°C 1/120 seconds
FI
300
Amps
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
RATED
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
MAXIMUM
LEAKAGE
CURRENT
VWM
VOLTS
@10mA
V(BR)
VOLTS
@ IPPM
VC
VOLTS
@V WM
ID
µA
IPPM
AMPS
@100A, 8.3ms
VF
VOLTS DC
704-15K36
31.5
36
53
100
300
3.0
704-15K36T
31.5
36
53
500
300
15.0
05021.R13 9/15
Page 2
MAXIMUM
PEAK PULSE
CURRENT
(Fig. 2)
MAXIMUM
FORWARD
VOLTAGE
www.protekdevices.com
05021
704-15K36 - 704-15K36T
Only One Name Means ProTek’Tion™
RTCA DO-160G COMPLIANT PRODUCT
TYPICAL DEVICE CHARACTERISTICS
FIGURE 1
PEAK PULSE POWER VS PULSE TIME
PPP - Peak Pulse Power - kilowatts
1,000
100
10
704-15K36T
15kW 10/1000µs
Waveform
704-15K36
1
1
10
100
1,000
td - Pulse Duration - µs
10,000
100,000
FIGURE 3
POWER DERATING CURVE
FIGURE 2
PULSE WAVEFORM
100
tf
TEST
WAVEFORM
PARAMETERS
tf = 10µs
td = 1000µs
100
Peak Value IPP
Peak Pulse Power
10/1000µs
80
% Of Rated Power
IPP - Peak Pulse Current - % of IPP
1M
td = t/(IPP/2)
50
60
40
20
e
0
0
-t
1
2
0
3
25
50
75
100
125
150
TL - Lead Temperature - °C
t - Time - ms
05021.R13 9/15
0
Page 3
www.protekdevices.com
05021
704-15K36 - 704-15K36T
Only One Name Means ProTek’Tion™
RTCA DO-160G COMPLIANT PRODUCT
PACKAGE INFORMATION
704 OUTLINE DIMENSIONS
MILLIMETERS
DIM
INCHES
MIN
MAX
MIN
MAX
A
49.28
51.56
1.97
2.03
B
43.92
44.96
1.73
1.77
C
2.79
3.56
0.11
0.14
D
18.29
19.81
0.72
0.78
E
3.18 DIA
0.125 DIA
F
8.76
10.29
0.345
0.405
G
13.51
15.04
0.532
0.592
H
0.66
0.71
0.026
0.028
I
11.94
13.46
0.47
0.53
J
2.41
2.92
0.095
0.115
K
7.70
8.20
0.303
0.323
L
9.40
10.92
0.37
0.43
NOTES
1. Dimension “E” is nominal.
A
C
B
F
D
G
H
E
I
K
L
05021.R13 9/15
Page 4
www.protekdevices.com
05021
704-15K36 - 704-15K36T
Only One Name Means ProTek’Tion™
RTCA DO-160G COMPLIANT PRODUCT
PACKAGE INFORMATION
704T OUTLINE DIMENSIONS
MILLIMETERS
DIM
INCHES
MIN
MAX
MIN
MAX
A
62.74
64.26
2.47
2.53
B
53.34
54.48
2.10
2.145
C
4.32
5.33
0.17
0.21
D
10.54
12.07
0.415
0.475
E
3.18 DIA
F
8.26
G
0.125 DIA
9.27
0.325
11.43
H
21.84
I
0.45
23.37
0.86
5.59
J
16.51
K
0.365
0.92
0.22
17.53
0.65
8.51
0.69
0.335
NOTES
1. Dimensions “E”, “G”, “I” and “K” are nominal.
A
B
C
F
I
D
G
H
E
J
K
ORDERING INFORMATION
BASE PART NUMBER
SUBMODULE
SCREENING
SUBMODULE & MODULE
SCREENING
SUBMODULE, MODULE,
GROUP B & C LOT TESTING
704-15K36
H1
H2
H3
704-15K36T
H1
H2
H2
NOTES
1. Marking on Part - logo, date code, polarity dot (for positive terminal) and part number.
05021.R13 9/15
Page 5
www.protekdevices.com
05021
704-15K36 - 704-15K36T
Only One Name Means ProTek’Tion™
RTCA DO-160G COMPLIANT PRODUCT
COMPANY INFORMATION
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products.
These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses
(NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog
switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Marketing: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By E-mail:
Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
ProTek Devices (Asia Pacific) Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
WARRANTY DISCLAIMER
ProTek warrants only that the 704-15K36 product (the “Device”) has been manufactured to meet the electrical specifications set forth in the electrical specification
data sheet published by ProTek Devices. ProTek disclaims all other warranties. If the Device is applied or used in circumstances in which the electrical characteristics
specified for the Device are exceeded, the Device may fail. ProTek Devices is not liable for any failures of the Device if the Device is used in circumstances that exceed
the published specifications for the Device. If for any reason the Device fails, customer’s sole and exclusive remedy shall be replacement of the failed Device. Customer assumes all risks arising from incorporation of the Device in to any other product. Customer acknowledges that ProTek Devices has made the Device available
to the Customer for inspection, and the Customer has had an opportunity to inspect and test the Device.
COPYRIGHT © ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05021.R13 9/15
Page 6
www.protekdevices.com