05412 SMP6LLC05-2P - SMP6LLC12-2P Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION The SMP6LLCxx-2P Series are high powered multi-line low capacitance transient voltage suppressor arrays that provides board level protection for standard TTL and MOS bus line applications against the damaging effects of ESD, tertiary lightning and switching transients. The series has a peak pulse power rating of 400 Watts for an 10/1000µs waveshape and meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. SO-16 PACKAGE FEATURES APPLICATIONS • RTCA DO-160G COMPLIANT PRODUCT • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 100A • 100A (2/10µs) per Bellcore GR-1089 (Intra Building) • 400 Watts Peak Pulse Power per Line (tp = 10/1000µs) • 3,900 Watts Peak Pulse Power per Line (tp = 8/20µs) • ITKU.20 IPP @ 40A (5/310µs) • Bidirectional Configuration • High Surge Capabilities • Protects 2 Bidirectional Lines • Low Capacitance: 5pF • RoHS Compliant • REACH Compliant • T1/E1 • Customer Premise Equipment (CPE) • Telecommunication Equipment • Wireless Communication Equipment MECHANICAL CHARACTERISTICS • Molded JEDEC SO-16 Package • Approximate Weight: 0.15 grams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 16mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIGURATION 05412.R1 9/15 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 Page 1 www.protekdevices.com 05412 SMP6LLC05-2P - SMP6LLC12-2P Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT TYPICAL DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS TL -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Peak Pulse Power (tp = 8/20µs) - See Figure 2 PPP 3,900 Watts Peak Pulse Power (tp = 10/1000µs) - See Figure 2 PPP 400 Watts Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Note 1) RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE VWM VOLTS @1mA V(BR) VOLTS @ 8/20µS V C @ IPP @V WM ID µA @0V, 1MHz C pF SMP6LLC05-2P 5.0 6.0 26.0V @ 150.0A 300 5 SMP6LLC6.5-2P 6.5 7.2 28.0V @ 150.0A 300 5 SMP6LLC12-2P 12.0 13.3 35.0V @ 140.0A 2 5 MAXIMUM CLAMPING VOLTAGE (Fig. 3) NOTES 1. Do not surge from pins 15/16 to 1/2, 3/4 to 13/14, 11/12 to 5/6 and 7/8 to 9/10. PIV typically greater than 100 Volts for each rectifier diode. FIGURE 1 MAXIMUM IPP VS PULSE DURATION BY VOLTAGE 5V 6.5V 12V 1000 IPP - Amps 100 10 1 05412.R1 9/15 10 100 td - Pulse Duration - µs Page 2 1000 www.protekdevices.com 05412 SMP6LLC05-2P - SMP6LLC12-2P Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT TYPICAL DEVICE CHARACTERISTICS FIGURE 2 PEAK PULSE POWER VS PULSE TIME 10 PPP - Peak Pulse Power - kilowatts 3900W, 8/20µs Waveform 1 400W, 10/1000µs Waveform 0.1 100 td - Pulse Duration - µs tf 100 FIGURE 4 POWER DERATING CURVE 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 40 Peak Pulse Power 10/1000µs 80 % Of Rated Power e-t 60 td = t/(IPP/2) 20 0 1,000 FIGURE 3 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 10 60 40 20 0 5 10 15 t - Time - µs 20 25 30 0 0 25 50 75 100 125 150 TL - Lead Temperature - °C 05412.R1 9/15 Page 3 www.protekdevices.com 05412 SMP6LLC05-2P - SMP6LLC12-2P Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT SPICE MODEL FIGURE 1 SPICE MODEL I/O ABD LCRD LCRD ABD Lg 0.8nH ABD - Avalanche Breakdown Diode (TVS) LCRD: Low Capacitance Rectifier Diode Lg - Lead Inductance TABLE 1 - SPICE PARAMETERS PARAMETER PART NUMBER SMP6LLC05-2P 05412.R1 9/15 UNIT ABD(TVS) LCRD BV V See Table 2 200 IBV µA 1 0.01 Cjo pF See Table 2 5 IS A See Table 2 1E-13 Vj V 0.6 0.6 M - 0.33 0.33 N - 1 1 RS Ohms See Table 2 0.31 TT s 1E-8 1E-9 EG eV 1.11 1.11 TABLE 2 - ABD SPECIFIC SPICE PARAMETERS I S (AMPS) B V(VOLTS) Cjo(pF) Rs(OHMS) 6.0 3000 1E-11 0.075 SMP6LLC6.5-2P 7.2 2600 1E-11 0.075 SMP6LLC12-2P 13.3 1150 1E-13 0.080 Page 4 www.protekdevices.com 05412 SMP6LLC05-2P - SMP6LLC12-2P Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT SO-16 PACKAGE INFORMATION OUTLINE DIMENSIONS DIM MILLIMETERS -A- INCHES MIN MAX MIN MAX A 9.80 10.00 0.386 0.393 B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.054 0.068 D 0.35 0.49 0.014 0.019 F 0.40 1.25 0.016 0.049 G 1.27 BSC -B1 0.05 BSC 0.18 0.25 0.007 0.009 K 0.10 0.25 0.004 0.008 P 5.80 6.20 0.229 0.244 R 0.25 0.50 0.010 0.019 NOTES -T- = Seating plane and datum surface. Dimensions “A” and “B” are datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. DIM MAX MIN MAX 1.14 1.40 0.045 0.055 B 0.64 0.89 0.025 0.035 C 6.22 - 0.245 - D 3.94 4.17 0.155 0.165 E 1.02 1.27 0.040 0.050 NOTES 05412.R1 9/15 R X 45° C -T- + 0.010” (0.25mm) M T B S A S K F 16 PL B INCHES MIN 1. Controlling dimension: inches. D A A + 0.010” (0.25mm) M B M 0° - 10° PAD LAYOUT DIMENSIONS MILLIMETERS P 8 PL 8 G J 1. 2. 3. 4. 5. 6. 9 16 C D E Page 5 www.protekdevices.com J 05412 SMP6LLC05-2P - SMP6LLC12-2P Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT TAPE AND REEL P0 D t 10 Pitches Cumulative Tolerance on tape ± 0.2 P2 E F W K0 B0 A0 P User Direction of Feed SPECIFICATIONS REEL DIA. TAPE WIDTH 178mm (7”) 16mm A0 B0 K0 D E F W P0 P2 P tmax 6.50 ± 0.10 10.30 ± 0.10 2.10 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 16.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 0.25 NOTES 1. 2. 3. 4. 5. 6. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 1,000 pieces per 16mm tape. Suffix - T13 = 13” Reel - 2,500 pieces per 16mm tape. Bulk product shipped in tubes of 48 pieces per tube. Marking on Part - part number, date code, logo and pin one defined by dot on top of package. ORDERING INFORMATION BASE PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE QTY SMP6LLCxx-2P N/A -T7 1,000 7” 48 SMP6LLCxx-2P N/A -T13 2,500 13” 48 This device is only available in a Lead-Free configuration. 05412.R1 9/15 Page 6 www.protekdevices.com 05412 SMP6LLC05-2P - SMP6LLC12-2P Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT COMPANY INFORMATION COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Asia Sales: [email protected] Europe Sales: [email protected] U.S. Sales: [email protected] Distributor Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2014 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05412.R1 9/15 Page 7 www.protekdevices.com