Datasheet - World Products Inc.

WPANT10014-SC
Micro-Hepta Antenna
Description / Application
This is is an ultra low profile, very broadband and highly efficient Hepta-band embedded antenna that works in 7 Frequency Bands. It
can be used as a Hepta-band antenna, Penta-band antenna, Quad-band antenna, Tri-band antenna or as a Dual-band antenna for
devices that operate on GSM / PCS / DCS / UMTS / CDMA / WCDMA / AMPS / EDGE / TDMA, GPS & Wi-Fi / Zigbee / BT
technologies. Its ease of integration and universal appeal make it an excellent choice for projects where space is a constraint along
with stringent performance specifications. This is an ideal choice for M2M, Enterprise and Industrial Applications where there is lot of
RF & Electrical interference & Shadowing effects.
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to
trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna
solutions. Please contact sales@worldproducts.com with your specific application requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance [Ω]
VSWR – Typical
Peak Gain [dBi] (Typical)
Efficiency [%] (Typical)
Polarization
Pattern
824 – 960 MHz
50Ω
1567 – 1583 MHz
50Ω
1710 – 2170 MHz
50Ω
2400 – 2500 MHz
50Ω
< 2.5:1
< 3:1
< 2.5:1
< 3:1
1 to 2.5 dBi
1 to 2 dBi
2 to 3 dBi
3.5 to 4.5 dBi
70 – 80 %
60%
60 – 70 %
55 – 70 %
Linear or Elliptical
Near Omni Directional
*
Note: The above mentioned relevant performance metrics are recorded with the Antenna installed on World Products Inc. Test Evaluation boards.
These Evaluation boards mimic the customer’s circuit board in general. The Antenna has enough bandwidth to accommodate for minor tuning issues
when installed on the client’s actual circuit boards. In case of discrepancy, WPI engineers will assist the clients in designing proper matching circuit
design.
Mechanical / Environmental Properties
Antenna Dimensions
Antenna Color
Materials
Operating / Storage Temperature
Environmental
Hazardous Materials
Rev: 4.0
Created on: February 21, 2014
1.5’’ X 0.67’’ X 0.52’’
Purple / Eggplant
(37.3mm X 17mm X 13.25mm)
UL 94-V compliant
o
o
-40 C to +90 C
Meets standards for UL 94V-0
RoHS Compliant
Created by: MKS
Approved by: BP
Page | 1
Pictures of the Antenna
Mounting Legs
Note: There is no need for any additional Cables or Connectors. This eliminates the possibility of additional overhead
for the Clients. Antenna and all the rest of the Evaluation boards are connected together through Soldering.
Rev: 4.0
Created on: February 21, 2014
Created by: MKS
Approved by: BP
Page | 2
Antenna Placement on a Circuit Board (62 mils thick FR4 Standard WPI Evaluation Boards)
Rev: 4.0
Created on: February 21, 2014
Created by: MKS
Approved by: BP
Page | 3
Rev: 4.0
Created on: February 21, 2014
Created by: MKS
Approved by: BP
Page | 4
Antenna 3D Radiation Pattern in Lower Frequency Band (Antenna Placement shown)
Rev: 4.0
Created on: February 21, 2014
Created by: MKS
Approved by: BP
Page | 5
Antenna 3D Radiation Pattern in Higher Frequency Band (Antenna Placement shown)
Rev: 4.0
Created on: February 21, 2014
Created by: MKS
Approved by: BP
Page | 6
VSWR of the Antenna
Rev: 4.0
Created on: February 21, 2014
Created by: MKS
Approved by: BP
Page | 7
Efficiency of the Antenna in % (including VSWR losses)
Rev: 4.0
Created on: February 21, 2014
Created by: MKS
Approved by: BP
Page | 8
Peak Gain of the Antenna in dBi
Rev: 4.0
Created on: February 21, 2014
Created by: MKS
Approved by: BP
Page | 9