WPANT10009-S1C 3G Cellular & ISM band Miniature Antenna Description / Application This is a 3G Cellular & ISM band, low-profile, miniature antenna. It can be mounted on any non-metallic surface to achieve optimal performance. This can also be mounted on metallic surfaces with little sacrifice in performance. Small size and ease of integration make this an ideal choice for applications where space is a constraint. This antenna has two installation options: standard 3M double stick tape on one side and slide-and-fit on the other side. Standard cable is 7.9’’ long 1.32mm OD Micro Coax with IPX / Hirose equivalent connector. We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna solutions. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency Approximate Antenna Impedance [Ω] 824 – 960 MHz 50Ω 1710 – 2170 MHz 50Ω < 2:1 < 2.5:1 Peak Gain [dBi] (Typical) ~ 2 dBi ~ 3 dBi Efficiency [%] (Typical) ~ 65% ~ 60% VSWR – Typical Polarization Pattern Linear Linear Near Omni Directional Near Omni Directional Mechanical / Environmental Properties Antenna Dimensions Antenna Color Cable Connector Tape Operating / Storage Temperature Environmental Hazardous Materials Rev: 6.0 Created on: February 21, 2014 1.7’’ X 0.8’’ X 0.25’’ (Including 3M tape thickness) Black 7.9’’ long 1.32mm OD Micro Coax IPX / Hirose equivalent 30 mils 3M VHB double stick o o -40 C to +90 C Meets standards for UL 94V-0 RoHS Compliant Created by: MKS Approved by: BP Page | 1 Pictures of the Antenna Rev: 6.0 Created on: February 21, 2014 Created by: MKS Approved by: BP Page | 2 VSWR of the Antenna Rev: 6.0 Created on: February 21, 2014 Created by: MKS Approved by: BP Page | 3