WPANT30043-RA 3G / 4G Penta-band Directional Panel Antenna Description / Application This is a High Gain Penta-band Directional Panel antenna that can be used for indoor distribution or repeater systems. It comes with a 1 foot long RG-58 cable and Type-N female connector. The antenna is at DC ground to ensure protection against lightning. We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further customize the antennas for your specific needs. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency Approximate Antenna Impedance [Ω] VSWR – Typical Peak Gain [dBi] (Typical) Polarization Pattern Accepted Power [W] (Max) Lightning Protection 806 – 960 MHz 50 Ω 1710 – 2500 MHz 50 Ω < 2:1 < 2:1 6 to 8 dBi 6 to 8 dBi Vertical or Horizontal Vertical or Horizontal Directional (16 dB front-to-back ratio) Directional (16 dB front-to-back ratio) 100 Watts 100 Watts DC ground DC ground Mechanical / Environmental Properties Antenna Dimensions Antenna Color Cable Connector Antenna Radome Operating / Storage Temperature Environmental Hazardous Materials Rev: 2.0 Created on: June 19, 2013 8.27’’ X 7.1’’ X 1.7’’ White (210mm X 180mm X 44mm) 11.8’’ long RG-58 Type-N Female ABS o o -40 C to +90 C Meets standards for UL 94V-0 RoHS Compliant Created by: MKS Approved by: BP Page | 1 Pictures of the Antenna Rev: 2.0 Created on: June 19, 2013 Created by: MKS Approved by: BP Page | 2