Pilkor components EMI Suppression film capacitors PCX2 339x6,x7 (Mini) MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.001㎌ to 10㎌ Capacitance tolerance ± 10 %, ± 20 % Rated (AC) voltage 50 to 60 Hz 305 V~ Climatic category 55/110/21 Temperature range -55℃ ~ +110℃ Reference IEC specification IEC 60384-14(3rd edition) and EN 60384-14 Safety approvals UL60384-14 & CSA E60384-14:09(cUL), ENEC, EK, CQC Potting & Encapsulation material Qualified in accordance with UL 94V-0 Safety class X2 * Intermediate values of the E12 series are available to special order FEATURES APPLICATIONS . 10 to 27.5 mm lead pitch . For X2-electromagnetic interference suppression . Supplied loose in box and taped on reel . Specially designed to meet the NEW REQUIREMENTS . Consist of a low-inductive wound cell of Metallized (PP) film . potted in a flame retardant case of new IEC 60384-14 Specification(3rd edition)/ EN 60384-14/UL60384-14 requiring a 2.5kV peak pulse voltage test . Not for use in series with the mains • Please refer to caution and warning at http://www.pilkor.co.kr/download/Introductions.pdf before using these products. 99 Pilkor components EMI Suppression film capacitors PCX2 339x6,x7 (Mini) Ordering Information l b l h h H lt P dt P0 PCX2 339 X X X XXX Capacitance Code 6 7 F Version & Voltage Mini-Cp / 305V Mini-Cu / 305V Low h-Cp / 305V Code D F J L Q Original pitch 10.0 mm 15.0 mm 22.5 mm 27.5 mm 37.5 mm Available versions Product (lmax) Code Packing method C – tol. Lead length & Height 0 Loose in box ±20% lt = 5.0±1.0mm Hole to hole ( Po) - 1 Loose in box ±10% lt = 5.0±1.0mm - 0 Arrange Pack. ±20% lt = 5.0±1.0mm - 1 Arrange Pack. ±10% lt = 5.0±1.0mm - 4 Loose in box ±20% lt =25.0±2.0mm - 5 Loose in box ±10% lt =25.0±2.0mm - 6 Ammopack ±20% H = 18.5mm* 7 Ammopack ±10% H = 18.5mm* 12.5 31.0 42.0 26.0 22.5 27.5 - 22.5 27.5 - - - - 37.5 - - - 37.5 10.0 15.0 22.5 27.5 37.5 10.0 15.0 22.5 27.5 37.5 12.7mm 10.0 15.0 22.5 27.5 - 12.7mm 10.0 15.0 22.5 27.5 - Pitch (P) 10.0 15.0 10.0 15.0 * H ; intape height ; for detailed specifications refer to chapter PACKAGING ** Some values is not following the coding rule. 100 18.0 Pilkor components EMI Suppression film capacitors SAFETY APPROVALS SAFETY APPROVALS PCX2 339x6,x7 (Mini) Voltage Value File Number 305V(AC) 1nF to 10㎌ E165646 305V(AC) 1nF to 10㎌ SE/0256-4 EK 305V(AC) C ≤ 0.1㎌ 0.1㎌ < C ≤ 0.33㎌ 0.33㎌ < C ≤ 1.0㎌ 1.0㎌ < C ≤ 3.0㎌ SH03001-9001 SH03001-8001 SH03001-13001 SH03001-13002 CQC 305V(AC) 1nF to 10㎌ CQC08001023138 UL 60384-14 & CSA E60384-14:09(cUL) ENEC(SEMKO) * * The ENEC-approval together with the CB-Certificate replace all national approval marks of the following countries(they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom Packaging Information SMALLEST PACKING QUANTITIES (SPQ) LOOSE IN BOX DIMENSIONS lt = 5.0 ± 1.0 mm lt = 25 ± 2.0 mm 4.0 x 10.0 x 12.5 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 5.0 x 11.0 x 18.0 6.0 x 12.0 x 18.0 7.0 x 13.5 x 18.0 8.5 x 13.5 x 18.0 8.5 x 15.0 x 18.0 10.0 x 16.5 x 18.0 11.0 x 18.5 x 18.0 6.0 x 15.5 x 26.0 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 11.5 x 21.0 x 26.0 13.0 x 23.0 x 26.0 2000 1500 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 500 500 500 1200 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 500 500 500 17.0 x 22.0 x 26.0 250 250 9.0 x 18.0 x 31.0 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 21.0 x 31.0 x 31.0 14.0 x 25.0 x 42.0 17.0 x 30.0 x 42.0 20.0 x 34.0 x 42.0 28.0 x 42.5 x 42.0 *Arrange packing 500 500 250 250 200 150 130* 105* 90* 65* 500 250 250 250 200 150 200 150 100 70 101 Pilkor components EMI Suppression film capacitors PCX2 339x6,x7 (Mini) SPECIFIC REFERENCE DATA FOR 305 VAC Tangent of loss angle at 1 khz at 10 khz -4 C ≤ 470 ㎋ 470 ㎋ < C ≤ 1 ㎌ C> 1 ㎌ ≤ 20 x 10 -4 ≤ 70 x 10 -4 - ≤ 10 x 10 ≤ 20 x 10 -4 ≤ 30 x 10 –4 Rated voltage pulse slope (dV/dt)R P = 10.0mm P = 15.0mm P = 22.5mm P = 27.5mm P = 37.5mm 400 V/㎲ 300 V/㎲ 150 V/㎲ 100 V/㎲ 100 V/㎲ R between leads, for C ≤ 0.33 ㎌ 〉15 000 ㏁ RC between leads, for C > 0.33 ㎌ 〉5 000 s Withstanding(DC) Voltage (cut-off current 10mA) C ≤ 1 ㎌ C > 1 ㎌ 2250 V, 1min 1850 V, 1min Withstanding(AC) Voltage between leads and case 2400 V ; 1 min VRac = 305 V~ X2 Cap. (㎌) loose and taped bxhxl (mm) MASS (g) CATALOGUE NUMBER PCX2 339 ..... loose in box lt = 5 ± 1.0 mm lt = 25 ± 2.0 mm C – tol. ±20 % Pitch = 10.0 ± 0.4 mm C – tol. ±10 % dt = 0.6 +0.06/-0.05 mm C – tol. ±20 % C – tol. ±10 % (Cp wire) 0.001 4.0 x 10.0x 12.5 0.8 D60102 D61102 D64102 D65102 0.0015 4.0 x 10.0x 12.5 0.8 D60152 D61152 D64152 D65152 0.0022 4.0 x 10.0x 12.5 0.8 D60222 D61222 D64222 D65222 0.0033 4.0 x 10.0x 12.5 0.8 D60332 D61332 D64332 D65332 0.0047 4.0 x 10.0x 12.5 0.8 D60472 D61472 D64472 D65472 0.0068 4.0 x 10.0x 12.5 0.8 D60682 D61682 D64682 D65682 0.01 4.0 x 10.0x 12.5 0.8 D60103 D61103 D64103 D65103 0.015 4.0 x 10.0x 12.5 0.8 D60153 D61153 D64153 D65153 0.022 4.0 x 10.0x 12.5 0.8 D60223 D61223 D64223 D65223 0.033 5.0 x 11.0 x 12.5 0.9 D60333 D61333 D64333 D65333 5.0 x 11.0 x 12.5 0.9 D60473 D61473 D64473 D65473 D61683 D64683 D65683 D61104 D64104 D65104 0.047 0.068 6.0 x 12.0 x 12.5 1.0 D60683 0.1 6.0 x 12.0 x 12.5 1.0 D60104 102 Pilkor components EMI Suppression film capacitors PCX2 339x6,x7 (Mini) VRac = 305 V~ X2 Cap. (㎌) loose and taped bxhxl (mm) MASS (g) CATALOGUE NUMBER PCX2 339 ..... loose in box lt = 5 ± 1.0 mm C – tol. ±20 % Pitch = 15.0 ± 5.0 x 11.0 x 18.0 5.0 x 11.0 x 18.0 5.0 x 11.0 x 18.0 5.0 x 11.0 x 18.0 5.0 x 11.0 x 18.0 5.0 x 11.0 x 18.0 5.0 x 11.0 x 18.0 6.0 x 12.0 x 18.0 Pitch = 15.0 ± 0.22 7.0 x 13.5 x 18.0 0.33 8.5 x 13.5 x 18.0 0.33 8.5 x 15.0 x 18.0 0.47 10.0 x 16.5 x 18.0 0.68 11.0 x 18.5 x 18.0 Pitch = 22.5 ± 0.22 6.0 x 15.5 x 26.0 0.33 6.0 x 15.5 x 26.0 0.47 7.0 x 16.5 x 26.0 0.68 8.5 x 18.0 x 26.0 1.0 10.0 x 19.5 x 26.0 1.0 11.5 x 21.0 x 26.0 1.5 13.0 x 23.0 x 26.0 2.2 16.5 x 22.0 x 26.0 Pitch = 27.5 ± 0.68 9.0 x 19.0 x 31.0 1.0 11.0 x 21.0 x 31.0 1.5 13.0 x 23.0 x 31.0 2.2 15.0 x 25.0 x 31.0 3.3 18.0 x 28.0 x 31.0 Pitch = 27.5 ± 4.7 21.0 x 31.0 x 31.0 Pitch = 37.5 ± 2.2 14.0 x 25.0 x 42.0 3.3 14.0 x 25.0 x 42.0 4.7 17.0 x 30.0 x 42.0 6.8 20.0 x 34.0 x 42.0 10 28.0 x 42.5 x 42.0 * Arrange packing 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.4 mm 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.7 0.4 mm 1.9 2.4 2.6 3.1 4.1 0.4 mm 3.0 3.0 3.5 4.4 5.5 6.5 8.0 10.0 0.4 mm 5.5 7.8 10.4 12.8 17.2 0.4 mm 20.4 0.7 mm 15.0 15.0 25.3 33.6 51.9 C – tol. ±10 % dt = 0.6 +0.06/-0.05 mm F60103 F61103 F60153 F61153 F60223 F61223 F60333 F61333 F60473 F61473 F60683 F61683 F60104 F61104 F60154 F61154 dt = 0.8 +0.08/-0.05 mm F60224 F61224 FF0334 FF1334 F60334 F61334 F60474 F61474 F60684 F61684 dt = 0.8 +0.08/-0.05 mm J60224 J61224 J60334 J61334 J60474 J61474 J60684 J61684 J60105 J61105 J60155 J61155 JF0225 JF1225 dt = 0.8 +0.08/-0.05 mm L60684 L61684 L60105 L61105 L60155 L61155 L60225 L61225 L60335 L61335 dt = 0.8 +0.08/-0.05 mm L70475 L71475 dt = 1.0 +0.1/-0.1 mm Q70225* Q71225* Q70335* Q71335* Q70475* Q71475* Q70685* Q71685* Q70106* Q71106* 103 lt = 25 ± 2.0 mm C – tol. ±20 % (Cp wire) F64103 F64153 F64223 F64333 F64473 F64683 F64104 F64154 (Cp wire) F64224 FF4334 F64334 F64474 F64684 (Cp wire) J64224 J64334 J64474 J64684 J64105 J64155 JF4225 (Cp wire) L64684 L64105 L64155 L64225 L64335 (Cu wire) L74475 (Cu wire) Q74225 Q74335 Q74475 Q74685 Q74106 C – tol. ±10 % F65103 F65153 F65223 F65333 F65473 F65683 F65104 F65154 F65224 FF5334 F65334 F65474 F65684 J65224 J65334 J65474 J65684 J65105 J65155 JF5225 L65684 L65105 L65155 L65225 L65335 L75475 Q75225 Q75335 Q75475 Q75685 Q75106 Pilkor components EMI Suppression film capacitors PCX2 339x6,x7 (Mini) MOUNTING NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed specifications refer to chapter "PACKAGING". SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. . For pitches of 15mm the capacitors shall be mechanically fixed by leads. . For larger pitches the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors are shown in the following drawing ; b max = b + 0.3mm Eccentricity Imax = I +0.3 mm - Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. - Product height with seating plane as given by IEC 60717 as reference : hmax ≤ h+0.3mm 104 Pilkor components EMI Suppression film capacitors PCX2 339x6,x7 (Mini) RATINGS AND CHARACTERISTICS Unless otherwise specified all electrical values apply to an ambient temperature of 23±1℃, an atmospheric pressure of 86 to 106kPa and a relative humidity 50±2%. For reference testing, a conditioning period shall be applied of 96±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. Maximum RMS Voltage as a function of frequency 103 AC voltage (V) 102 101 101 102 103 104 f(Hz) AC voltage (RMS value) as a function of frequency at Tamb≤110℃ 105 105 Pilkor components EMI Suppression film capacitors PCX2 339x6,x7 (Mini) PRODUCT MARKING Capacitors are marked with having following information; 1.Manufacturer (PILKOR) 2.Manufacturer's type designation (PCX2 339 ) 3.Rated capacitance in code according to IEC 60062 4.Rated (AC) voltage (305V~) 5.Sub class (X2) 6.Tolerance on rated capacitance M =±20 % K = ±10 % 7.Climatic category (55/110/21) 8.Code for dielectric material (MKP) 9.Year and week of manufacturing (e.g. 1401) 10.Safety approvals Example of marking Pitch P = 10.0mm or P = 15.0mm 10n M 305V~ 10n M 305V~ X2 339 PILKOR 1401 339 PILKOR 1401 CQC X2 CQC 305V~ 305V~ Marking on the side or Marking on the side Pitch P = 15.0mm or P = 22.5 mm or P = 27.5mm PILKOR 150n M 305V~ X2 PCX2 339 MKP 1401 CQC 55/110/21 Marking on the top 305V~ Marking on the side Pitch P = 22.5 mm or P = 27.5mm or P = 37.5mm 1u M 305V~ X2 PCX2 339 MKP PILKOR 1401 CQC 55/110/21 305V~ Marking on headface Pitch P = 27.5mm 1u M 305V~ 339 PILKOR 1401 X2 CQC 305V~ Marking on the top 106