Datasheet - World Products Inc.

WPANT10022-C2D
915 MHz PIFA Antenna
Description / Application
This stamped metal PIFA Antenna can be installed inside any wireless device. It is a surface independent antenna, in the sense it
will work the same whether it is installed on a metallic or a non-metallic surface. It comes with a 3.15’’ long standard 1.32mm OD
Micro Co-ax cable and IPX / Hirose equivalent connector.
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to
trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna
solutions. Please contact sales@worldproducts.com with your specific application requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance []
VSWR – Typical
900 – 930 MHz
50Ω
< 2:1
Peak Gain [dBi] (Typical)
Device and Application dependent
Efficiency [%] (Typical)
Device and Application dependent
Polarization
Pattern
Linear
Omni-directional
Note: The above mentioned performance metrics were recorded with the antenna embedded inside the client’s device.
Mechanical / Environmental Properties
Antenna Dimensions
Antenna Color
Cable
Connector
Operating / Storage Temperature
Environmental
Hazardous Materials
Rev: 3.0
Created on: February 21, 2014
1.9’’ X 1.8’’ X 0.6’’
Silver
(47.75mm X 46.5mm X 14.5mm)
3.15’’ long 1.32mm OD Micro Co-ax
IPX / Hirose equivalent
o
o
-40 C to +90 C
Meets standards for UL 94V-0
RoHS Compliant
Created by: MKS
Approved by: BP
Page | 1
Pictures of the Antenna (3D Drawing)
Rev: 3.0
Created on: February 21, 2014
Created by: MKS
Approved by: BP
Page | 2
VSWR of the Antenna
Rev: 3.0
Created on: February 21, 2014
Created by: MKS
Approved by: BP
Page | 3