WPANTDP009-R3A - World Products Inc.

GPS L1 Band Active Module
Description / Application
This is a waterproof magnetic mount antenna that is ideal for automotive amplified GPS applications. This sleek design is an efficient
active GPS antenna that only uses 15mA with a supply voltage ranging between 3 and 5 volts.
We can assist your engineers to optimize mounting positions for these antennas in your applications and can further customize the
antennas for your specific needs. Please contact [email protected] with your specific application requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance []
VSWR – Typical
LNA Gain [dBi] (Typical)
Active Antenna Peak Gain [dBi]
Noise Figure (dB) (Typical)
Voltage [V] (Typical)
1567 – 1583 MHz
< 2:1
24 dBi
27 dBi @ Zenith
1.5 dB
3.0 – 5.0 V
Axial Ratio (dB)
3.0 dB
Mechanical / Environmental Properties
Antenna Dimensions (L x W x H)
Antenna Color
Operating / Storage Temperature
Hazardous Materials
Rev: 1.0
Created on: October 30, 2013
1.82’’ x 1.51’’ x 0.54’’
(46.3mm x 38.3mm x 13.8mm)
ABS Plastic
5 meter long RG-174
Straight MCX plug
-40 C to +90 C
Meets standards for UL 94V-0
This antenna is built in accordance with: IP 67
RoHS Compliant
Created by: TT
Approved by: BP
Page | 1
Pictures of the Antenna
Cable is terminiated by MCX connector.
Rev: 1.0
Created on: October 30, 2013
Created by: TT
Approved by: BP
Page | 2