Datasheet - World Products Inc.

High Gain GPS Body-mount Antenna
Description / Application
This is a very High Gain Active Patch Body mount Outdoor antenna for GPS L1 Band function. This can be used in portable
navigation and tracking applications where high performance is required. The module consists of a circularly polarized patch antenna
and a Low Noise Amplifier (LNA). It comes with a TNC Female connector. It can be customized with different cable assemblies and
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further
customize the antennas for your specific needs. Please contact [email protected] with your specific application
Electrical Properties
Operating Frequency
Approximate Antenna Impedance [Ω]
LNA Gain [dBi] (Typical)
Active Antenna Peak Gain [dBi]
Voltage [V] (Typical)
Current [mA] (Typical)
1572 – 1578 MHz
40 dBi
44 dBi @ Zenith
3 – 16 V
15 mA (25 mA Max)
Noise Figure [dB] (Typical)
1.5 dB
Axial Ratio [dB] (Typical)
Accepted Power [W] (Max)
3 dB
400 mW
Mechanical / Environmental Properties
Antenna Dimensions
Antenna Color
Attachment Method
Operating / Storage Temperature
Hazardous Materials
Rev: 1.0
Created on: July 01, 2013
2.6’’ Base Dia X 1.9’’ Height
Dark Grey
(66.5mm X 47.5mm)
TNC Female
L-bracket option
-40 C to +90 C
IP67 rated; Meets standards for UL 94V-0
RoHS Compliant
Created by: MKS
Approved by: BP
Page | 1
Pictures of the Antenna
Rev: 1.0
Created on: July 01, 2013
Created by: MKS
Approved by: BP
Page | 2