XFDM Data sheet Pre-amplified/5V Excitation/Differential Features . . . . . Applications . Industrial instrumentation . Pressure switch, Pneumatic device Two accuracy ranks, 1.5 FS and 2.5 FS available Volt level output On-chip amplification and temperature compensations Pre-calibration of offset voltage and span Very small surface mountable package, Easy to mount on PCB . Medical device Part number for ordering XFDM - 025KP D S R H Accuracy No mark : 2.5 H : 1.5 FS Rated pressure(Pa) Model XFDM FS Terminal leads direction (See Outline Diagram) R: Pressure type Terminal leads configuration D : Differential S : Surface mount package DW : Differential (Bipolar pressure) Pressure type Differential pressure XFDM Model Package configuration Surface mount package Measurable pressure range (kPa) 100 100 0 25 0 50 0 100 0 200 0 1000 Part number for ordering XFDM-100KPDWSR XFDM-025KPDSR XFDM-050KPDSR XFDM-100KPDSR XFDM-200KPDSR XFDM-001MPDSR XFDM-100KPDWSRH XFDM-025KPDSRH XFDM-050KPDSRH XFDM-100KPDSRH XFDM-200KPDSRH XFDM-001MPDSRH Specifications Model/Rated pressure 100KPDW(H) 025KPD(H) 050KPD(H) 100KPD(H) 200KPD(H) Recommended operating conditions Pressure type Differential pressure 100 25 50 100 200 Rated pressure 1.020 0.255 0.510 1.020 2.040 Measurable pressure range 100 100 0 25 0 50 0 100 0 200 Pressure media Non-corrosive gas only Excitation voltage 5.0 0.25 Absolute maximum rating Maximum load pressure Twice of rated pressure Maximum excitation voltage 8 Operating temperature 40 125 Storage temperature 40 125 Operating humidity 30 80 (No dew condensation) Electric performances/characteristics (Excitation voltage Vcc=5.0V constant, Ambient temperature Ta=25 ) Current consumption less than 10 Output impedance less than 10 Source current less than 0.2 Sink current less than 2 Mechanical response time 2 (For the reference) Full scale span voltage 4.5 Offset voltage 1, 2 0.2 0.1125, 0.2 0.0675(H) Full scale span voltage 1, 2 4.7 0.1125, 4.7 0.0675(H) Accuracy 2 2.5, 1.5(H) Note ; 1) Output refers to pressure at pressure port 2. 2) Excluding input voltage error. 1 001MPD(H) Unit 1000 10.20 0 1000 kPa kg/cm2 kPa VDC 1.5times of rated pressure VDC RH mA mA mA msec V V V FS/0 85 XFDM Data sheet Pre-amplified/5V Excitation/Differential Outline dimensions Unit : mm XFDM 0.15 6 5 Ma Projections 4 Pressure port 2 5 4 10 Labelled faceplate x 8 3.5 6 Pressure port 1 2 6 3 2 1 1 10 M 2.54 ax. 5.5 0.5 0.9 0.6 Recommended footprint for PCB 2- 1.2(Holes for projections) 3.5 1 1 3.4 Index direction 1.4 2 5 (11.5) 2.54 0.8 3 1 2.54 2.54 2 1 1 3.3 2.5 17.5 11 14 R0.5 Zooming up the projections Index Land-pads 11 16.6 (Unit : mm) Connection diagram XFDM Vcc(DC5V) Vcc Vout Vout GND C2 C1 GND Remarks : 1) C1 : Connect 680pF capacitor within 2cm distance from leads. 2) C2 : Connect 0.01 F or more capacitor within 2cm distance from leads. 3) 4 and 5 pins must be No Connection. Open them as floating ones completely, and do NOT connect to other line or each other. Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538 2 E-mail : [email protected]