DG38L industrial relays • • • Up to 45A switching capability Magnetic arc blowout Improved DG38 Series • RoHS Compliant Contacts Number and type of contacts SPST-NO, SPST-NC, SPDT Contact Material AgCdO, AgSnOInO Rated current 45A /240VAC, 45A / 28VDC Rated voltage / max. switching voltage 277VAC / 28VDC (contact factory for higher DC Voltages) Max. breaking capacity See Table 1 (Page 2) Coil Rated voltage DC 5...110VDC (see Table 2 - Page 2) Rated power consumption DC 1W approx. Insulation Insulation resistance 1000MΩ at 500VDC, 50%RH Dielectric strength • between coil and contacts 1500Vrms for 1min. • between open contacts 1500Vrms for 1 min. General Data Ambient temperature: (operating / storage) -55°C to +85°C Operating time (typical) 15ms Release time (typical) 10ms Electrical life: (resistive AC1) 1.5 x 104 Mechanical life (cycles) 1 x 107 Cover protection category IP67 (sealed type) Shock resistance 10g, 11ms (functional); 100g (destructive) Vibration resistance DA 1.5mm, 10-55Hz. Weight 32g approx. American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: [email protected] http://www.aecsensors.com © American Electronic Components Inc 2008 Page 1 of 3 Specifications are subject to change without notice. E&OE. DG38L 240908 DG38L industrial relays Contact Rating Table 1 Form Resistive SPST-NO SPST-NC 45A / 240VAC 45A / 28VDC SPCO (SPDT,1C/O) NO Contacts NC Contacts 15A / 240VAC 30A / 240VAC 15A / 240VAC 15A / 28VDC 30A / 28VDC 15A / 28VDC UL/CSA Ratings Load Type Voltage SPST-NO SPST-NC General Purpose 240VAC 45A 20A 30A 15A 240VAC 45A 20A 30A 15A 28VDC 30A 15A 30A 15A 240VAC 3HP 0.75HP 2HP 0.75HP 120VAC 1.5HP 0.375HP 1.5HP 0.375HP 240VAC 120A / 45A 45A / 15A 75A / 30A 30A / 10.5A 120VAC 147A / 33A Tungsten Lamp 120VAC TV8 TV4 TV8 TV4 Ballast 277VAC 15A 4.5A 15A 4.5A 125-250VAC 700VA Resistive Motor LRA / FLA Pilot Lamp SPCO (SPDT, 1C/O) Coil Data Table 2 Coil Voltage Code Nominal Voltage Resistance Must Operate Must Release Voltage max. Voltage min. VDC (Ω) ± 10% VDC VDC 1005 5 27 3.75 0.5 1006 6 40 4.50 0.6 1009 9 97 6.75 0.9 1012 12 155 9.00 1.2 1024 24 660 18.00 2.4 1048 48 2560 36.00 4.8 1110 110 10330 82.50 11.0 American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: [email protected] http://www.aecsensors.com © American Electronic Components Inc 2008 Page 2 of 3 Specifications are subject to change without notice. E&OE. DG38 240908 DG38L industrial relays Ordering Codes Contact Material Type D G 3 8 Contact Number & Arrangement L - Cover Protection Category Coil Code Terminal Type - 0 - Contact Material 10 - AgCdO 70 - AgSnOInO See Table 2 Contact Number & Arrangement 11 - SPDT (1C/O) 21 - SPST-NO (1N/O) 31 - SPST-NC (1N/C) Cover Protection Category 2 - Cover, IP40 3 - Sealed, IP67 Connection / Terminal Mode 0 - PCB Pins + QC Terminals Overall Dimensions Fig. 1 Fig. 2 Wiring Diagrams Dimensions in mm SPST-NO (1 Form A) SPST-NC (1 Form B) SPDT (1 Form C) * Mounting Hole not needed for SPST-NO. ** Mounting Hole not needed for SPST-NC. Notes: 1) 2) 3) All parameters, unless otherwise specified, are measured at ambient temperature of 23°C For optimum electrical life, please remove the tape of the sealed version after cleaning process. Custom variants possible for volume requirements. American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: [email protected] http://www.aecsensors.com © American Electronic Components Inc 2008 Page 3 of 3 Specifications are subject to change without notice. E&OE. DG38L 240908