DIP Series

MEDER electronic
DIP Series
Molded DIP
Reed Relays
DESCRIPTION
The DIP series is a very compact design having a
low profile package and a high profile package.
This series is compatible with all DIP relays.
CHARACTERISTICS
• Low profile package
• Standard pin configurations
• IC-pin compatible
• 4.25 kVDC breakdown voltage for pin out 13
• UL approval
FEATURES
• High resistance option available
• SMD version available
• Diode option available
• Mercury wetted switch option available
DIMENSIONS
All dimensions in mm [inches]
www.meder.com
Germany # ++49-(0)7733-94870, USA # 800-870-5385
267
DIP Series
MEDER electronic
Molded DIP
Reed Relays
ORDER INFORMATION
RELAY
NOMINAL
CONTACT
SWITCH
SERIES
VOLTAGE
FORM
MODEL
DIP
XX -
XX
XX -
1A
05, 12, 15,
OPTIONS
24
1B
1C
( ) VERSION WITH
MAGNETIC SHIELD
XX
X
11, 13*
72, 75
2A
05, 12
OPTION
PIN OUT
19
L (M), D (Q), E
(R), F (S)
21
90
Part Number Example
DIP12 - 1A72 - 13L
12 is the nominal voltage
1A is the contact form
72 is the switch model
13 is the pin out
L is the option
51
* Selects 4.25 kVDC (3.0kVRMS) breakdown voltage contact to coil.
PIN OUT
www.meder.com
268
Germany # ++49-(0)7733-94870, USA # 800-870-5385
MEDER electronic
DIP Series
Molded DIP
Reed Relays
OPTIONS
( ) Versions with magnetic shield
OPTIONS DEPENDENCE ON CASE SIZES
CONTACT
FOR M
PACKAGE
SIZE
OPTIONS
PIN OUT
L
11
X
13
X
D
E
F
M
Q
X
X
X
R
S
X
Low Profile
1A
11
X
13
X
X
X
X
X
X
High Profile
1B
High Profile
19
X
X
2A
High Profile
21
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1C
X
Low Profile
51
High Profile
L
D
E
F
=
=
=
=
M
Q
=
=
R
=
S
=
No option
With Diode between pin 2 and 6 (Pin 2 is positive)
Internal shield on pin 9
With Diode between pin 2 and 6 (Pin 2 is positive)
and Internal shield on pin 9
External magnetic shield
External magnetic shield
and diode between pin 2 and 6 (Pin 2 is positive)
External magnetic shield
and internal shield on pin 9
External magnetic shield
and with diode between pin 2 and 6 (Pin 2 is positive)
and internal shield on pin 9
www.meder.com
Germany # ++49-(0)7733-94870, USA # 800-870-5385
269
DIP Series
MEDER electronic
Molded DIP
Reed Relays
RELAY DATA
All data at 20 0C
Switch Model -->
Contact For m -->
Contact Ratings
Conditions
Contact 72
For m A / B
Contact 75
For m A / B
Contact 90
For m C
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units
Switching Power
Any DC combination of V & A not
to exceed their individual max.'s
20
10
3
W
Switching Voltage
D C or peak A C
200
1000
175
V
Switching Current
D C or peak A C
1.0
0.5
0.25
A
Carry Current
D C or peak A C
1.25
1.0
1.2
A
Static Contact Resistance
w/ 0.5V & 50mA
150
200
150
mΩ
Dynamic Contact Resistance
Measured w/ 0.5V & 50mA 1.5 ms
after closure
250
mΩ
Insulation Resistance
(100 Volts applied)
Across contacts
Contact to coil
1 0 12
1 0 12
1 0 10
1 0 12
109
1 0 12
Ω
Breakdown Voltage
Across contacts
Contact to coil
320
1500*
1000**
1500*
200
1500
VD C
Operate Time, incl. Bounce
Measured w/ 100% overdrive
200
200
0.5
Reset Time
Measured w/ no coil suppression
Capacitance
Across contacts
Contact to coil
0.5
0.1
0.1
0.7
ms
1.5
ms
0.2
2.0
0.4
2.0
1.0
3.0
pF
1000
500
100
106
Cycles
Life Expectancies
Switching 5 [email protected] 10mA
DC only & <10 pF stray cap.
For other load requirements please see our life test section located
on page 151.
Environmental Data
Shock Resistance
1/2 sine wave duration 11ms
50
50
50
g
Vibration Resistance
From 10 - 2000 Hz
20
20
20
g
Ambient Temperature
10 0C/ minute max. allowable
-20
70
-20
70
-20
70
0
C
Storage Temperature
10 0C/ minute max. allowable
-35
95
-35
95
-35
95
0
C
Soldering Temperature
5 sec. dwell
260
0
C
260
260
* Selects pin out 13 and 4.25 kVDC (3.0 kVRMS) breakdown voltage contact to coil. ** For higher voltage requirements please consult factory.
www.meder.com
270
Germany # ++49-(0)7733-94870, USA # 800-870-5385
MEDER electronic
DIP Series
Molded DIP
Reed Relays
COIL DATA
CONTACT
FOR M
SWITCH
MODEL
All data at 20 0C *
1A
1B**
72
75
2A
1C
90
COIL
VOLTAGE
COIL
RESISTANCE
PULL-IN
VOLTAGE
DROP-OUT
VOLTAGE
NOMINAL
COIL
POWER
VD C
Ω
VD C
VD C
mW
Nom.
Max.
Min.
Typ.
Max.
Min.
Max.
Min.
Max.
Typ.
5
7.5
450
(180)
500
(200)
550
(220)
0.85
3.5
0.75
3.4
50
12
16
900
1000
1100
1.9
8.4
1.8
8.3
145
15
20
1800
2000
2200
2.3
10.5
2.2
10.4
115
24
30
1800
2000
2200
3.7
16.8
3.6
16.7
290
5
7.5
450
(180)
500
(200)
550
(220)
0.85
3.5
0.75
3.4
50
12
16
900
1000
1100
1.9
8.4
1.8
8.3
145
15
20
1800
2000
2200
2.3
10.5
2.2
10.4
115
24
30
1800
2000
2200
3.7
16.8
3.6
16.7
290
5
7.5
180
(126)
200
(140)
220
(154)
0.85
3.5
0.75
3.4
125
12
16
450
500
550
1.9
8.4
1.8
8.3
290
15
20
1800
2000
2200
2.3
10.5
2.2
10.4
115
24
30
1800
2000
2200
3.7
16.8
3.6
16.7
290
5
7.5
180
200
220
0.85
3.5
0.75
3.4
125
12
16
450
500
550
1.9
8.4
1.8
8.3
290
15
20
1800
2000
2200
2.3
10.5
2.2
10.4
115
24
30
1800
2000
2200
3.7
16.8
3.6
16.7
290
( ) versions with magnetic shield.
* The pull-in / drop-out voltage and coil resistance will change at the rate of 0.4% per 0C.
** Reclosure of the Form B may occur if the max. coil voltage is exceeded. Coil polarity on Form B must be observed. Pin two is positive.
www.meder.com
Germany # ++49-(0)7733-94870, USA # 800-870-5385
271