FPS Data sheet Sensing element/Absolute Features Applications . Metal-can package . Barometric pressure measurable . Industrial instrumentation . Medical device . Non-corrosive gas or liquid media measurable . Barometer, Relative altimeter . Fuel injection control or altitude compensation for automotive system Part number for ordering FPS-51 B - 15P A Rated pressure(PSI) Model FPS-51 Pressure type A : Absolute pressure Package configuration (See outline dimensions.) B: Pressure type Absolute pressure FPS-55B Model Package configuration Metal-can package Measurable pressure range (kPa.abs) 0 103.4 Part number for ordering FPS-51B-15PA Specifications Model/Rated pressure Recommended operating conditions Pressure type Rated pressure 15PA Absolute pressure 103.4 1.055 0 103.4 Non-corrosive gas, or liquid media 3.5 Accuracy Measurable pressure range Pressure media Excitation current(Constant) Absolute maximum rating Maximum load pressure 202.6 Maximum excitation current 7 Operating temperature 30 100 Storage temperature 40 120 Operating humidity 30 80 (No dew condensation) Electric performances/characteristics (Excitation current i=3.5mA constant, Ambient temperature Ta=25 ) Full scale span voltage 20 80 Offset voltage 20 (at 0kPa.abs) Bridge impedance 800 1000 Mechanical response time 2 (For the reference) Temperature sensitivity of offset (TSO) 6 Temperature coefficient of sensitivity (TCS) 7 Linearity 0.6 Pressure hystersis 0.2 1 Unit kPa. abs kg/cm2. abs kPa. abs mADC kPa. abs mADC RH mV mV msec FS/ 30 100 FS/ 30 100 FS FS FPS Data sheet Sensing element/Absolute Outline dimensions Unit : mm FPS-51B 1 Pressure port 4 5.84 P.C.D 9.15 8.4 2.5 0.45 Terminal leads 6.85 3 0.8 12 BOTTOM VIEW Recommended footprint for PCB 4- 0.7(Diameter of through holes) 4- 1.2(Diameter of lands) Connection diagram FPS-51B i 3.5mA 2 R2 Constant current source R1 3 Output voltage 1 R3 R4 4 Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538 2 E-mail : [email protected] 5.84 6 (Diameter of pressure port) 3.2 0.8 2 unit : mm