NS-5/P2 Dual Axis Inclinometer The NS-5/P2 dual-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate. Thin film, platinum electrodes are deposited on the substrate. Then the chamber is partially filled with electrolytic fluid and hermetically sealed. Applications Advantages • Zero point detection • Wide range of application • Aligning and level • Low vibration control sensitivity • Angle • Higher Precision The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity. P-type dual axis inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital output. With their machined, aluminium baseplate and IP 65 housing, they are an ideal choice for a variety of industrial, automotive and aerospace applications. 4 Pinout 1 2 3 4 5 6 7 3 5 1 7 2 +Ub GND Earth n.c. n.c. Input digital RS232 Output digital RS232 6 Specifications Supply Voltage Ground Earth n.c. n.c. RxD TxD Dimensions (mm) 60 40 1,5 5,5 3,5 1,5 Range: Percision: digital: Resolution: Temperature stability: Zero point: Sensitivity: Output signal: Digital RS 232 Transmission rate: Format: Operating temp. Range: Storage temp. Range: Supply voltage: Current consumption: Protection class: Connection: ± 5° +/- 0.01° 0.0005° -4 < 5*10 °/K -3 < 1*10 °/K In degrees 2400 or 9600 Baud ASCII -25°C ...+85°C -40°C ...+85°C +5VDC ...+ 24VDC ca. 35 mA IP 65 Connector or Pigtail 90 75 60 45 4,3 HL-Planartechnik GmbH Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020 Internet: http://www.hlplanar.com E-Mail: [email protected] Stand: 29.06.01 Design: Zn