LL4001 THRU LL4007 SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere MINI-MELF(DO-213AA) FEATURES * GPRC (Glass Passivated Rectifier Chip) inside Cathode Band 0.067 (1.70) 0.059 (1.50) * The plasitc package carries underwrites laboratory Flammability classification 94V-0 * For surface mounted application D= SOLDERABLE ENDS * Glass passivated cavity-free junction +0 D - 0.008(0.203) 0.018 (0.45) 0.010 (0.25) 0.144 (3.65) 0.136 (3.45) MECHANICAL DATA 0.016 (0.40) 0.012 (0.30) Case : JEDEC MELF(DO-213AA) molded plastic Terminals : Tin plated, solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.033 gram *Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. SYMBOLS LL4001 LL4002 LL4003 LL4004 LL4005 LL4006 LL4007 UNITS Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC blocking voltage o Maximum average forward rectified current TA = 75 C I (AV) 1.0 Amps IFSM 30 Amps VF 1.0 Volts Peak forward surge current 8.3ms single half sine-wave superimposed on rated load Maximum instantaneous forward voltage at 1.0 A o Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=125 C 5 IR o 50 uA Maximum reverse recovery time (NOTE 1) trr 2000 nS Typical junction capacitance (NOTE 2) CJ 15 pF Typical thermal resistance (NOTE 3) Operating junction and storage temperature range R JA 75 R JL 30 TJ,TSTG -65 to +175 o C/W o C NOTES : (1) Reverse recovery test condition : IF 0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient, 0.24 x 0.24" (6.0 x 6.0mm) copper pads to each terminals REV. 1 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES LL4001 THRU LL4007 FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 35 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.2 1.0 0.8 0.6 0.4 0.2 8.3ms SINGLE HALF SINE-WAVE 30 25 20 15 10 5 0 0 0 25 50 75 100 125 150 1 175 10 o NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 10.00 IINSTANTANEOUS FORWARD CURRENT, AMPERES 100 TERMINAL TEMPERATURE, C PULSE WIDTH=300uS 1% DUTY CYCLE 1.00 o TJ = 25 C 0.10 o TJ = 150 C 10 o TJ = 100 C 1 o TJ = 25 C 0.01 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 110 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 200 JUNCTION CAPACITANCE, pF o TJ = 25 C 100 60 40 20 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS REV. 1 Zowie Technology Corporation