Filename: tfs 915l.doc Version 1.1 Vectron International 04.02.2014 Filter specification TFS 915L 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: Source: Load: 23 0 °C dBm 50 50 Ω Ω 128 Ω || -2.5 pF 128 Ω || -2.5 pF Characteristics Remark: The reference level for the relative attenuation arel of the TFS 915L is the minimum attenuation in the passband. The minimum attenuation in the passband is defined as the insertion loss ae. The nominal frequency fN is fixed at 915 MHz without any tolerance or limit. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss ae 3.2 Nominal frequency fN - Passband @ 3dB PB Amplitude ripple within PB Relative attenuation arel @ @ @ @ fN fN fN fN – + – + 10.7 10.7 21.4 21.4 MHz MHz MHz MHz Input power level Operating temperature range OTR Storage temperature range TCf * max. 5.5 dB 915 MHz 0.35 MHz KHz fN 0.4 dB max. 3.5 dB 50 45 60 45 dB dB dB dB min. min. min. min. 20 20 30 30 dB dB dB dB - max. 0 dBm - - 10 °C ... + 60 °C - - 40 °C ... + 85 °C 25 Frequency inversion temperature Temperature coefficient of frequency 1265 dB tolerance / limit - 0.035 ± °C - ppm/K² - *) ∆fc(Hz) = Tcf(ppm/K²) x (T - To)² x fT0 (MHz). Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 915l.doc Version 1.1 Vectron International 04.02.2014 Filter specification TFS 915L 2/5 0 0 -10 -1 -20 -2 magnitude in dB magnitude in dB Filter characteristic -30 -40 -50 -3 -4 -5 -60 -6 -70 895 900 905 910 915 920 frequency in MHz 925 -7 930 914 914.2 914.4 914.6 914.8 915 915.2 915.4 915.6 915.8 frequency in MHz Construction and pin connection (All dimensions in mm) 915L ● E06 1 2 3 4 5 6 7 8 Ground Input Ground Ground Ground Output Ground Ground Date code: E F G ... Year + week 2014 2015 2016 50 Ω Test circuit 6 2 1, 3, 4, 5, 7, 8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 915l.doc Version 1.1 Vectron International 04.02.2014 Filter specification TFS 915L 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0.35 mm or g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 15 min. each / 100 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions, see page 4: "Air reflow temperature conditions" This filter is RoHS compliant (2011/65/EU) Packing Tape & Reel: IEC 286 – 3, with exeption of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters peer reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direc tion Tape (all dimensions in mm) W : 12,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 5,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 8,00 ± 0,1 D1(min) : 1,50 Ao : 4,30 ± 0,1 Bo : 4,30 ± 0,1 Ct : 9,5 ± 0,1 P1 t P2 W G Ct Bo F G E Do Po PIN Ma rker Ko Da te Co d e Typ D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 12,4 +2/-0 W2(max) : 18,4 N(min) : 50 C : 13,0 +0,5/-0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 915l.doc Version 1.1 Vectron International 04.02.2014 Filter specification TFS 915L 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 915l.doc Vectron International Version 1.1 Filter specification 04.02.2014 TFS 915L 5/5 History Version Reason of Changes Name Date 1.0 Generation of filter specification Dr. Sabah 16.08.2005 1.1 Maximum input power updated Kortenbeutel 04.02.2014 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.