OX-220 Oven Controlled Crystal Oscillator OX-220 Features • • • • • Applications Reflow Process Compatible Surface Mount package SC_CUT Crystal Low Profile Compact Package (8.3mm) Standard Frequencies: 10; 12.8; 19.2; 20; 26; 30.72 Mhz • • • • • Base stations Test equipment Synthesizers Military communication equipment Digital Switching Performance Specifications Frequency Stabilities1 (SC-Cut Crystal-Option - 10 to 40 MHz) Parameter Min Max Units Condition vs. operating temperature range (referenced to +25°C) -10 -10 Typical +10 +10 ppb ppb -20 to +70°C -40 to +85°C Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs. aging / day vs. aging / year vs. aging / year -0.2 -5 -5 -0.5 -1 -60 -100 +0.2 +5 +5 +0.5 +1 +60 +100 ppm ppb ppb ppb ppb ppb ppb at time of shipment, nominal EFC VS ±5% static Load ±5% static ≤10 Mhz after 30 days of operation > 10 Mhz after 30 days of operation ≤ 10 Mhz after 30 days of operation > 10 Mhz after 30 days of operation 5 minutes to ±100ppb of final frequency (1 hour reading) @ +25°C Holdover start up time Warm-up time Page 1 of 8 Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Supply Voltage (Vs) Parameter Supply voltage (standard) Min Typical Max Units 3.135 3.3 3.465 VDC 4.75 5.0 5.25 VDC 3.1 Watts during warm-up 1.5 Watts steady state @ +25°C Power consumption Condition RF Output Signal [standard] HCMOS Load 15 pF Signal Level (Vol) 0.4 Signal Level (Vol) VDC 0.5 Signal Level (Voh) 2.4 Signal Level (Voh) 3.5 Duty Cycle 45 with Vs=3.3V and 15pF Load with Vs=5.0V & 12V and 15pF Load VDC with Vs=3.3V and 15pF Load with Vs=5.0V & 12V and 15pF Load 55 % Rise time 5 ns Fall time 5 ns Signal @ (Voh-Vol)/2 Sine Wave Load 50 Ω Output Power @3,3V 2 5 8 dBm 50 Ω load Output Power @ 5.0V 5 8 11 dBm 50 Ω load -30 dBm 50 Ω load Harmonics Tuning Range Fixed OCXO; No adjust ±0.8 ±2.4 Linearity ppm with SC cut crystal Option5 Frequency Tuning (EFC) 10% Tuning Slope Positive Control Voltage Range 0.0 1.4 2.8 VDC with Vs=3.3V 0.0 2.0 4.0 VDC with Vs=5.0V modulation Reference Voltage Output (Vref ) Reference Voltage 2.75 2.8 2.85 VDC with Vs = 3.3 VDC 3.92 4.0 4.08 VDC with Vs = 5.0 VDC Additional Parameters 3 Phase Noise -80 -110 -138 -148 -152 -70 -105 -130 -140 -145 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz @ 30.72MHz with SC Cut Phase Noise3 -90 -120 -140 -148 -152 -80 -110 -135 -145 -145 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz @ 20MHz with SC Cut 10 g Weight Processing & Packing Handling & Processing Note Page 2 of 8 Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Absolute Maximum Ratings supply voltage (Vs) 5.5 V Output Load 50 pF Operable Temperature Range -45 +85 °C Storage Temperature Range -45 +85 °C with Vs=3.3 & 5.0 VDC Outline Drawing / Enclosure OX-220 Height “H” cover material 12.1 plastic 8.5 plastic Pin Connections 1 Electronic Frequency Control Input (EFC) 2 Reference Voltage output 3 Supply Voltage Input (Vs) 4 RF Output 5 Oven Alarm 6 N.C or Option (must remain un connected) 7 Ground (Case) Dimensions in mm Page 3 of 8 Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Standard Shipping Method (OX-220 / OX -221) 2 3 4 4* 1+/ *+,-./+* 56 75 0/ +,- ./+/- /+$/ <' 89($ 2 :89($ ); <' ! "#$%&'( ) ! "#$%&'( 5 Enclosure Type Tape Width W (mm) Quantity per meter Quantity per reel Dimension P OX-2201 (12.1mm) 44 37.5 175 28 OX-2206 (8.5mm) 44 37.5 250 28 Recommended Reflow Profile IPC/JEDEC J-STD-020 (latest revision) Additional Information: This SMD oscillator has been designed for pick and place reflow soldering. SMD oscillators must be on the top side of the PCB during the reflow process. Additional Environmental Conditions Parameter Description Rapid temperature changes MIL-883-1010 Cond B 1000 cycles -55/125C Vibration MIL-STD-883 Meth 2007 Cond A 20G 20-2000Hz 4x in each 3axis 4 min Shock Mech.Shock MIL-STD-202 Meth 213 Cond.C 100G 6ms 6 shocks in each direction Solderability J_STD_002C Cond A, Through hole device/ Cond. B, SMD 255C (diving time 50,5sec.) Dip+Look with 8h damp pre-treatment: solder wetting >95% Solvent resistance MIL-STD-883 Meth 2015 Solv. 1,3,4 ESD HBM JESD22-A114-F Class 1C 10* 1000V Moisture Sensit. Level 1 JESD22-A113-B RoHS compliance 100% RoHS 6 compliant Washable non-washable device Note: All temperatures refer to topside of the package, measured on the package body surface. Page 4 of 8 Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information OX - 220 1 - D A E - 108 0 - 10M0000000 Product Family OX: OCXO Frequency Package SMD version: 220 Frequency Control 0: No Tuning 1: ±0.8 to ±2.4ppm Height 1: 12.1 mm 6: 8.5 mm Stability Code 108: ±10ppb Supply Voltage D: 5V E: 3.3V RF Output Code A: HCMOS E: Sinewave Temperature Range E: -40°C to +85°C J: -20°C to +70°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Europe: Asia: Vectron International 267 Lowell Road Suite 102 Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 7268.801.100 Fax: +49 (0) 7268.801.282 Vectron International 68 Yin Cheng Road(C), 22nd Floor One LuJiaZui Pudong, Shanghai 200120, China Tel: +86 21 6194 6886 Fax: +86 21 6194 6699 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 16.01.2015 Page 8 of 8 Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com