UNISONIC TECHNOLOGIES CO., LTD ES1J DIODE SURFACE MOUNT SUPER FAST RECTIFIER DESCRIPTION + The UTC ES1J is a surface mount super fast rectifier, it uses UTC’s advanced technology to provide customers with high forward surge current and low reverse leakage, etc. The UTC ES1J is suitable for surface mounted applications. SMA (JEDEC DO-214AC) FEATURES * Low reverse leakage * High forward surge current capability * Super fast switching for high efficiency SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free ES1JL-SMA-R ES1JG-SMA-R Note: Pin Assignment: A: Anode K: Cathode Package SMA Pin Assignment 1 2 K A Packing Tape Reel MARKING Cathode Band for uni-directional Only UTC ES1J Date Code L: Lead Free G: Halogen Free www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-267.B ES1J DIODE ABSOLUTE MAXIMUM RATINGS Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL RATINGS UNIT Working Peak Reverse Voltage VRWM 600 V Repetitive Peak Reverse Voltage VRRM 600 V Maximum RMS Reverse Voltage VRMS 420 V DC Blocking Voltage VR 600 V Average Rectified Output Current (TA=55°C) IO 1.0 A Peak Forward Surge Current 8.3ms Single Half IFSM 30 A Sine-Wave Superimposed on Rated Load Junction Temperature TJ -55~+150 °C Storage Temperature TSTG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient (Note 3) SYMBOL θJA RATINGS 60 UNIT °C/W ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Instantaneous Forward Voltage VFM IF=1.0A 1.70 V 5 μA TA=25°C DC Reverse Current at Rated DC Blocking IRM Voltage TA=100°C 50 μA Reverse Recovery Time (Note 1) trr 35 ns Junction Capacitance (Note 2) CJ 10 pF Notes: 1. Reverse recovery condition IF=0.5A, IR=1.0A, Irr=0.25A. 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. 3. P.C.B. mounted with 0.2×0.2” (5.0×5.0mm) copper pad areas. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R601-267.B ES1J DIODE TYPICAL CHARACTERISTICS Maximum Non-Repetitive Peak Forward Surge Current 1.0 30 Peak Forward Surge Current (A) Average Forward Rectified Current (A) Forward Current Derating Curve 0.8 0.6 0.4 Single Phase 0.2 Half Wave 60Hz Resistive or inductive Load 0 0 25 50 75 100 125 150 175 25 20 15 10 8.3ms Single Half Sine-Wave (JEDEC Method) 5.0 10 1 Ambient Temperature (°C) Number of Cycles At 60Hz Typical Reverse Characteristics 1,000 20 TJ=25°C 10 Pulse Width=300s 1%Duty Cycle Nstantaneous Reverse Current (μA) Instantaneous Forward Current (A) Typical Instantaneous Forward Characteristics 1 0.1 0.01 0 0.4 0.8 100 1.2 1.6 1.8 Instantaneous Forward Voltage (V) 100 10 TJ=100°C 1 0.1 TJ=25°C 0.01 0 20 40 60 80 100 Percent of Peak Reverse Voltage (%) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-267.B